Question about Televison & Video

1 Answer

Emerson lc200em8g will not turn on

I am looking for a service manual for the above model. This tv is made by Funai if you have any service manuals for this make would be great I am just trying to get an idea on how they made there tv's

Posted by on

  • 4 more comments 
  • anthony76 Jan 26, 2009

    I am not sure what protection mode is and no it is not under warranty. Do you have the manual from nodevice.com? I think it is a power supply issue. The tv seems to turn on for less then a second then turns back off I think.

  • anthony76 Jan 27, 2009

    The main board is a BA7140F01013. I would still like to look at the service manual for the LC320em82s if you have it digital form. Thank you for all of your help.

  • anthony76 Jan 29, 2009

    I have tested the power supply and I have voltage one side of the transformer(165 volts). I have nothing at the other side. This one has four pins on one side and 8 on the other. Is this the same thing that was wrong with yours?

  • redsled Mar 16, 2009

    I have an Emerson LC320EM82S. It powers on and immediately goes into standby mode. Does anyone know the fix for this?

  • Devon Sacco
    Devon Sacco May 11, 2010

    That sure is protection mode. I have a Emerson TV that did the same thing. Everyone is having problems with the Fundai power inverter board. The inverters that power the LCD screen seem to fail really early in life. I had mine for 4 months and it gave out. I replaced the bad transformer inverter and it works again. You may want to try find a replacement board or replace the bad inverter transformer. If your board# is BA71FOFO1042 I can get the part# for you if you need it. As for the service manual, I don't have one for yours and most web sites charge money for donwloading. I only have one for my TV LC320EM82S. Let me know if you need more help.

  • Devon Sacco
    Devon Sacco May 11, 2010

    The only place that I can find that right now is nodevice.com.

    It's only 6 pages, so I don't it complete service manual.

    Did your Emerson go into protection mode? And is it under warrany?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

I only have my service manual on paper form. Sorry. The inverter transformer maybe the same part as yours. 8 pin and less that 3" big. Let me know if you need the part# for it. Good Luck

Posted on Jan 27, 2009

  • Devon Sacco
    Devon Sacco Jan 29, 2009

    Not sure which one your testing. My problem was with the 6 small mini transformer that line up on the sides, that connected to the Lcd screen. I tested the each connector on the sides for resistance, and found one that an open circuit. Which lead me to the open circuit in the small inverter transformer. Sounds like you are testing the big main transformer. I don't think you'll see voltage on the other side when the protection mode is active. When you turn the TV on, It only gives you a few seconds test for voltage. I had to stick with resistance testing at that point.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a manual on the universal remote model NB150


The NB150 remote was included with several Funai-manufactured DVD players. The user manual for the remote is a few pages within one of those manuals. The Emerson EWD2004, Sylvania DVC840E and the Symphonic CWF804 are all compatible models. The Emerson EWD2004 manual is available here: http://www.usersmanualguide.com/funai/dvd_player_with_vcr/ewd2004 . Most of the button functions are described on page 8. Click on the link with the model name to download and read the PDF. (The link is a Javascript link.)

As far as I know, this isn't a universal remote. It only controls the DVD/VCR recorder. If the above manual page doesn't match your remote, please double-check the model number. Please add a comment with the manufacturer and the model number if you need additional help.

I hope this helps.

Cindy Wells

Apr 11, 2016 | Televison & Video

1 Answer

Lost manual and remote for model emv404


Several places have replacement remotes for the EMV404, including http://www.amazon.com/EMERSON-Replacement-Remote-Control-NA372UD/dp/B009H5QVNO and http://www.remotes.com/SearchResults.asp?Search=EMV404 . Many universal remotes may also work. Try codes for Emerson, if available or Funai. The Emerson VCR was made by Funai . Unfortunately, the manual is not available here: http://www.funai-corp.com/support/manuals.aspx . However, they do have a manual for the EWV404 which uses the same remote codes. The two products may be similar enough for the manual to help you. The direct link to the manual is http://www.funai-corp.com/support/om/EWV404.pdf .

I hope this helps.

Cindy Wells

Dec 23, 2015 | Televison & Video

1 Answer

How can I fix volume control


How do I stabilize volume on a television? : hometheater




https://www.reddit.com/.../how_do_i_stabilize_volume_on_a_tele...










RedditAug 31, 2014 - We have a Samsung Smart TV - 52". My mom is a hardcore movie watcher, and I have very sensitive hearing. It's a constant battle because I'm ...Missing: lc320slx


Funai Emerson LE220EM3 Owner's Manual - ManualsLib




www.manualslib.com > ... > LCD TV > Emerson LE220EM3









Emerson LE220EM3 LCD TV pdf manual download. ... LCD TV FUNAI LC320SLXService Manual ... Model # Screw dimension •. ... Tv, Switching On Your Tv And Putting It In Standby Mode, Adjusting Volume, Switching Channels ... Clock setting tostabilize the PC screen and Phase Canadian French rating, then press OK.

Nov 26, 2015 | Sylvania Televison & Video

1 Answer

Rm500 codes for symphonic tv


Sharing this info for anyone who may find it of some use for other Emerson/Funai/Symphonic tv's...

I stumbled across this on a random day trying once again to figure out the service menu on my Emerson LC320EM8, by basically digging through every funai LCD service manual I could find on funai's german ftp server online. As these remotes seem fairly universal to all Emerson/Funai/Symphonic (as well as Most no names or store branded) tv's......give this a try..

There's a hidden "service" button on the remote located below and in between the locations of the CH +/- and VOL +/- buttons....you have to cut the bezel on the remote to reveal it...

How to initialize the LCD television:
1. Turn the power on.
2. To enter the service mode, press the service
button on the service remote control unit. (Refer to
page 5-1.)
- To cancel the service mode, Press POWER button on
the remote control unit.
3. Press INFO button on the service remote control
unit to initialize the LCD television.
4. "INITIALIZED" will appear in the upper right of the
screen. "INITIALIZED" color will change to green
from red when initializing is complete.

Hope this info is useful to someone else...
regards,
Gio.C

Apr 10, 2014 | Televison & Video

1 Answer

CODIGOS PARA TV EMERSON LC200EM8G


0065 0101 0113 0119. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Mar 28, 2014 | Radio Shack 3 in 1 Universal Remote

1 Answer

EMERSOM TV MODEL CR202EM9 PDF MANUAL


hello
User manual for Emerson and Funai are the same. Just download the user manual to your Emerson TV from one among the following links. If you feel adny difficulty in downloading the same, inform your email address to me by fixya comment. I'll send a copy of the manual to you by return mail.
http://www.funaiservice.com/manual/EMERSON/Manual/CR202EM9.pdf
http://www.manuals-in-pdf.com/index.php?main_page=index&cPath=301
http://www.dataentryjobs.us/67948.html
http://www.baremart.com/emerson-owners-manual-television-ewt19s2-for-emerson-ewt19s2-crt-television/

Mar 03, 2012 | Emerson CR202EM9 TV

2 Answers

Urc-31021BG1 CODES DOES NOT WORK WITH MY EMERSON tv LC195EM82 Any other codes I can use?


Unfortunately, you probably need a newer remote. The Emerson TV was released in 2007. The manual for the LC195EM82 is available from Funai: http://www.funai-corp.com/6pdf/om/LC195EM87.pdf . The URC-3021 remote was released in May 2004.

Universal remotes only have codes for devices released 6 months or more before the remote was programmed. The commands change with various generations of control boards.

You can try the Emerson and Funai codes (since Funai built the TV for the Emerson brand) but I don't think you will have any better results.

Emerson TV codes: 0154 0236 0463 0180 0178 0171 0623
Funai codes: 0180 0171
The code list and the manual for the URC-3021 are available here: http://oneforall-na.com/remote.php?type=URC%203021 . Look at the bottom of the page for the links.

I wish that I had better news for you.

Cindy Wells

Oct 05, 2011 | One For All URC-3021 Remote Control

1 Answer

We have lost our manual for this TV. Is it possible to print one from online or to have one mailed to us?


Emerson TVs are built by Funai. You can get the manual from the Funai site, http://www.funai-corp.com/support/manuals.aspx . Search for your TV model to find the manual as a PDF and then print the file.

The direct link to the manual for the EWL20S5 is http://www.funai-corp.com/6pdf/om/EWL20S5.pdf . For the best results when you want to print the file, save it to your computer and then open it in Adobe Reader (instead of using the plugin). You may need to change the scale at which the document is printing. Use the Print Preview feature to guide your printing choice.

I hope this helps.

Cindy Wells

Aug 09, 2011 | Emerson EWL20S5 20 in. EDTV-Ready LCD...

1 Answer

Emerson LCD 20" tv. Plug in tv and power light comes on but immediately starts blinking. TV does not respond to any remote buttons. TV does not switch off when 'manual' power switch on side of tv is...


that problem is caused by the digital board and the partstore has them or right from Funai they mad your set around 150 dollars and the board is located just above the mainboard

Dec 14, 2009 | Televison & Video

1 Answer

My 32 inch emerson powers up and cuts off after a few seconds.


Hi, I own the same TV and had the same problem. It's the #1 plaguing issue with flat panel TVs made by Funai corp. Emerson is made by them. Normally, when this happens, the TV goes into " Protection Mode " because of a failing circuit board.

The most common thing to go out on flat panel TV is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board. But, I can't say it's 100% the problem because I can't actually look at the tv over the internet. I can only make guesses with the symptom. I'm willing to bet you have the same problem like mine. One of six Inverter Transformers when bad on my Power/Backlight Inverter Supply Board. I replaced it and it works fine again. d66cb18.jpg

You have a few choices:

1. You can try leaving the TV unplugged for 30 minutes so the TV can reset itself.


2. If you have some electronic experience, if you can find and purchase a Service Manual at Tvtechcenter.com:
http://www.tvtechcenter.com/xcart/search.php?mode=search&page=1 It will help you diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists.Usually, cost under $6. And most cases the new part cost less than $15.
http://www.partstore.com/Part/Funai%20Corporation%20Inc/Funai/LTZ2PC0MS008.aspx

http://www.encompassparts.com/products/?LTZ2PC0MS008

3. Pay a TV shop to do the repairs. It maybe costly, but get an estimate of how much they will charge. That way you can decide if it worth repairing or replacing the whole TV.

Sep 10, 2009 | Emerson LC320EM8 32 in. LCD TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72168 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

68970 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...