Question about Homelite Xl-12 Chainsaw 3/8" Guide Bar Bolt 67485

Open Question

How to replace homelite 240 guide bar bolts - Homelite Xl-12 Chainsaw 3/8" Guide Bar Bolt 67485

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
rowdy45176
  • 2176 Answers

SOURCE: looking for a Homelite 16'' chain saw bar part number PT1637144

You might try psep.biz for the bar. They list some replacement bars that should fit the model number 240 that you listed. If you don't find what you need let me know and I will try another site.

Posted on Mar 15, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to remove the automatic oiler in my homelight chainsaw z3850b


Chainsaw Oil Pump Replacement - Homelite ... - YouTube

? 5:57
https://www.youtube.com/watch?v=8dj0Voh3TTM
Jan 21, 2014 - Uploaded by RepairClinic.com
The most common reason for replacing the oil pump is ... ...Chainsaw Oil Pump Replacement - Homelite Chainsaw Repair (part #309514001) ... spark plug wrench, cord, clutch removaltool, adjustable wrench, needle-nose pliers ... The chainsaw guy shop talk Repair Homelite 150 chainsaw Auto Oiler ...

How to Repair a Homelite XL Chainsaw Oiler - Home Guides

homeguides.sfgate.com > Real Estate Advice > Basic Real Estate Advice
The Homelite XL chain saw is designed to use one tank of oil per each tank of fuel. Fill the oil ... Push the guide bar toward the saw, and remove it and the chain. Clean the ... Automatic Oiler and Oil Line Replacement ..... My Ridevisit'Cars-My

Dec 21, 2015 | Garden

1 Answer

Homelite xl chainsaw e-ring on bar tightening bolt needs replacing. Where does it go and how do I do it


The original Homelite company has been out of business for many years. Getting parts for them at our repair shop is impossible. I know you can go and buy new Homelite units from the big box stores, but these are not being manufactured from Homelite. Sometimes you can find parts from repair shops that have leftover parts. You might want to call around. You might find them. George

Oct 07, 2013 | Homelite Consumer Products 9.0 Amp, 14 In....

2 Answers

I wish to obtain a replacement guide bar for my Ryobi Expand-it tree pruner but have been unable to find a source so far. Can you help?


Your Ryobi tree pruner is actually made by Homelite. The model # for the pruner is RY15520. The guide bar is part#671834008 and is available through www.homelite.com or your local homelite dealer. Online, the bar is $28 plus shipping. To avoid shipping, buy it from the local dealer. You can search for your local dealer on the same website. To find the part, go to "order parts online" at the upper right part of the homepage. It will then transfer you to Gardner, Inc. Gardner handles all of Homelites online parts.

Good luck!

Nov 03, 2010 | Ryobi Garden

1 Answer

Can i get instructions to download on how to change the chain on my homelite 33cc chainsaw with 14.35 chains


Got to homelite.com and input your model number.
WARNING:
When servicing, use only identical Homelite
replacement parts. Use of any other parts may
create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses
with side shields during power tool operation or
when blowing dust. If operation is dusty, also
wear a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from
various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove
dirt, dust, lubricant, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating
oils, etc., come in contact with
plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious
personal injury.
LUBRICATION
All of the bearings in this product are lubricated with
a sufficient amount of high grade lubricant for the
life of the unit under normal operating conditions.
Therefore, no further lubrication is required.
REPLACING THE guide BAR AND
CHAIN
See Figures 34 - 43.
DANGER:
Never start the engine before installing the
guide bar, chain, clutch cover, and clutch drum.
Without all these parts in place, the clutch can
fly off or explode, exposing the user to possible
serious injury.
maintenance
Fig. 34
Fig. 35
Fig. 36
WARNING:
To avoid serious personal injury, read and
understand all the safety instructions in this
section.
n Always place the switch in the stop “ ” position
before you work on the saw.
clutch
cover
Run
Position
sprocket
Page 26 — English
cutters
bar
groove
chain drive links
Fig. 38
maintenance
chain rotation
chain drive links
Fig. 37
n Make sure the chain brake is not set by pulling
the chain brake lever/hand guard towards the
front handle to the run position.
NOTE: When replacing the guide bar and chain,
always use the specified bar and chain listed in
the Bar and Chain Combinations section later
in this manual.
n Wear gloves when handling the chain and bar.
These components are sharp and may contain
burrs.
n Press in on the clutch cover lock knob and rotate
counterclockwise until the clutch cover can be
removed.
n Remove the bar and chain from the mounting
surface.
n Remove the old chain from the bar.
n Lay out the new saw chain in a loop and
straighten any kinks. The cutters should face
in the direction of chain rotation. If they face
backwards, turn the loop over.
n Place the chain drive links into the bar groove
as shown.
n Position the chain so there is a loop at the back
of the bar.
n Hold the chain in position on the bar and place
the loop around the sprocket.
n Fit the bar flush against the mounting surface
so that the bar studs are in the long slot of the
bar.
n Replace the clutch cover ensuring that the
adjusting pin in the clutch cover is in the bar
chain tensioning pin hole and that both bar
studs are securely in their respective holes in
the clutch cover.
NOTE: The adjusting pin may need to be slightly
repositioned with the chain tensioning dial so
that it is aligned with the position of the bar chain
tensioning pin hole.
n Replace the clutch cover and rotate clutch
cover lock knob just enough to hold the cover
in position.
NOTE: The bar must be free to move for chain
tension adjustment.
n Lift the tip of the guide bar up to check for sag.
n Remove all slack from the chain by rotating the
chain tensioning dial clockwise until the chain
seats snugly against the bar with the drive links
in the bar groove.
n Release the tip of the guide bar and, if the chain
sags, turn the chain tensioning dial clockwise.
Repeat this process until sag does not exist.
n Hold the tip of the guide bar up and tighten the
clutch cover lock knob securely.

Jun 25, 2010 | Homelite Consumer Products 9.0 Amp, 14 In....

1 Answer

How to tighten a chain on homelite 180 classic


loosen the bar bolts in front of the power head and pull bar outward till you have very little slack in the chain,then re-tighten the bar bolts

May 10, 2010 | Garden

1 Answer

How to adjust the chain model 10655


See Chain Installation & Adjustment here: http://www.fixya.com/support/r4146814-chainsaw_chain_installation
No chain brake on your saw, ignore 1.

The adjustment screw is parallel to the bar. Look from the nose of the bar toward the engine the adjuster is the screw head just to the right of the bar (order follows):
1. - Engine,
2. - bar,
3. - guide bar plate (flared portion away from the engine),
4. - finally the clutch cover.

There is an illustration of most parts here:
Homelite/Ryobi.com (authorized parts supplier)
https://www.gardnerinc.com/recons/disclaimer-lg.php - Agree; Choose “Product Line”; “Select OEM” & “Select Catalog” both to “Homelite Consumer Products”. A drop down list appears; self explanatory from here:
Find "XL Chain Saw UT-10655", see "Housing & Handles" print.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Mar 05, 2010 | Homelite Garden

1 Answer

It stopped oiling the chain and putting air bubbles back in to the oil tank . the model 240 homelite UT-10621


The first thing is to clean the bar, oil ports, then the main port in the case, blockage is the main cause. When the bar area is clean,
Take a stright pin and try and clean out the port as much as you can,then if you have a shop vac that has a attachment that goes to a smaller end, such on the port and get any lose dust out.

If this does not work the pump could need to be rebuilt.

Feb 15, 2010 | Homelite Garden

1 Answer

Looking for a Homelite 16'' chain saw bar part number PT1637144


You might try psep.biz for the bar. They list some replacement bars that should fit the model number 240 that you listed. If you don't find what you need let me know and I will try another site.

Mar 15, 2009 | Homelite Garden

1 Answer

I have a homelite 240-hg I cant get it started i


Try some starter fluid (eather) that wil give you an indication if it's ignition or a fuel problem.

Feb 28, 2009 | Homelite Consumer Products 9.0 Amp, 14 In....

Not finding what you are looking for?
Homelite Xl-12 Chainsaw 3/8" Guide Bar Bolt 67485 Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Homelite Garden Experts

roeb

Level 3 Expert

540 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Mike Squire

Level 2 Expert

420 Answers

Are you a Homelite Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...