Question about Kenmore 24032\24036 Top Load Washer

1 Answer

F11 Kenwood Washer .Alarm beeping with F11 . Model 11044832202 S/N csr1310378. Usualy works fine just with one load ,after that I have got masage F11 on dispay and I'm not able to start washer again until next day.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

The F11 code is from a communication break in the serial link from the CCU to the MCU (from the brains to the washer motor controller). Stay with me here!
There are three blue wires that go to the MCU from the CCU. Most of the problems probably occur during the final spin when the machine spins fastest and longest to extract all of the water.
Hence, the most vibrations cause the connectors to shake until there is a break in communication!

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is it beeping and stuck on the wool cycle


will be some blocked up filter or water supply
if its beeping then this is usualy something blocked up with oose

Sep 04, 2014 | Dyson CRO1 Front Load Washer

1 Answer

My washer beeps f 11


Hi

Thanks for using FixYa. F11 is a communication error between the central control unit (CCU) and the motor control unit (MCU). To start with check the wire harness connections between CCU and MCU, and then check the motor. If both of them appear to be working fine then it seems that the MCU of your washer has gone bad as the control unit seems to be working fine. Please rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Oct 26, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Wash machine is beeping code "F 11"


Hi


Thanks for using FixYa. F11 is a communication error between the central control unit (CCU) and the motor control unit (MCU). To start with check the wire harness connections between CCU and MCU, and then check the motor. If both of them appear to be working fine then it seems that the MCU of your washer has gone bad as the control unit seems to be working fine. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Sep 06, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Mfw97000sq1 model. had problem with error code f11 could you tell me what wrong?


Hi


Thanks for using FixYa. F11 is a communication error between the central control unit (CCU) and the motor control unit (MCU). To start with check the wire harness connections between CCU and MCU, and then check the motor. If both of them appear to be working fine then it seems that the MCU of your washer has gone bad as the control unit seems to be working fine. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 11, 2010 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Fault code F11 keeps appearing. The washer seems to be working but within seconds of starting to wash, F11 appears.


Hi


Thanks for using FixYa. F11 is a communication error between the central control unit (CCU) and the motor control unit (MCU). To start with check the wire harness connections between CCU and MCU, and then check the motor. If both of them appear to be working fine then it seems that the MCU of your washer has gone bad as the control unit seems to be working fine. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jul 20, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The washer beeps and flases f dl


it probably flashes also f11....to correct that problem , you must replace CCU board (upper board) and latch assembly...

F11: CCU board
FDL: latch problem

Jul 03, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Door locks, but will not fill up with water. Alarm sounds and lights flash once every minute or so


There is a rectangular magnet attached on the inside of the drawer for the detergent. Located on the right hand side near the front of the drawer. This magnet had come loose. Some glue and caulking worked well and the washer is working fine now. Meant to post this weeks ago.

May 12, 2009 | Kenmore Front Load Washer

1 Answer

Beeping sound


Problem was the alarm on the water dispenser next to the washer...................................duh

Sep 06, 2008 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

1 Answer

Check water supply error F11


pump cannot be activated:check pump , connections and wiring

Sep 12, 2006 | Hotpoint Ultima WD72 Front Load...

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...