Question about Teac AG-V1050 Receiver

1 Answer

Magnavox Model 2P3602 - Turntable will not turn

I have inherited a Magnavox console stereo (model 2P3602) from my grandparents. They bought it new in 1968. The radio works great, but the turntable will not spin. Appears to not have any belts, as we were expecting to find when we took the back off.
Any suggestions? Any thoughts on what we should look for or do? Thank you!

Posted by on

  • bradanderson Jan 27, 2009

    Thank you! I think through much cleaning and some WD40 we have gotten it to turn now. So if we can keep it running, it appears now we are probably in need of a new needle.
    Appreciate your comments!!!! Thanks!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,199 Answers

This is a DIRECT DRIVE turntable (no belts) you are going to have to replace the drive motor (if you can find one!)
Please rate response!
thank you!

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to connect a turntable connected to a yamaha a450 stereo amplifier...can I attache the a450 to the htr-6130 ?


If the turntable is newer kind you can connect it in any Stereo input like CD, VCR , etc.

If the turntable is older model you can only connect it to PHONO input (if amp has one) and make sure earthing cable is connected on Amp

Remember input is only stereo (unless your model has digital input) and select sound effect eg Pro Logic for enhanced sound,

Aug 26, 2014 | Yamaha HTR-6130 Receiver

1 Answer

No sound on early 70's magnavox stereo console


i have a 70's receiver ......well actually,,, my wife's from junior high days......acted the same as yours.........i took the cover off ....checked fuses.......3 amp.......glass type with silver ends.......1 was cooked......replaced it.........just like new.

Mar 11, 2009 | Teac AG-V1050 Receiver

1 Answer

Will not drop 45's


I think the spindle is broke or stuck in some way! if you have another one try that! and if you dont you may be able to use those little plastic adapter thingys and place them on the 45s and try that !
It sounds to me like the spindle is sticking and is pulling the turntable belt and slowing it down!
I would look for a new/used spindle
I think this will fix ya!
Please rate This answer
THANK YOU!

Jan 17, 2009 | Teac AG-V1050 Receiver

1 Answer

I have a magnavox sterio console with radio and turntable bought


35+ year old capacitors. Change out the filter caps next to the transformer. then De-oxit ALL the pots and switches.

Dec 04, 2008 | Teac AG-V1050 Receiver

2 Answers

Magnavox Console Stereo turntable does not turn at correct speed


I'm in Nashville, where can I have my 70"s Magnavox stereo console serviced to get bugs out of it as well as get new cartridges?

Nov 24, 2008 | Teac AG-V1050 Receiver

1 Answer

SX-1600 + KD-491F


Hi again,

It would seem that you posted the problem here also. With your kind permission, I will repost my excerpts of my responses that others may benefit on similar concerns.

A. Most current receivers no longer include a PHONO input. Perhaps what could be done is to purchase a phono to line level pre-amplifier to go along in your purchase for a new receiver.

I was made to understand that the Pioneer SX-1600 is prone to speaker output problems which could either be:
1. the speaker relay (protection); and/or
2. the amp, STK4191II Stereo Module.

Either should be relatively easy to work on and perhaps you can try the services of a locally available qualified electronic technician since the repairs would not be too specialized. The service manual may be of help (or at least a schematic , they may be downloaded from here and here).

B. To recap what you need is a receiver that can accommodate:
4 - Pioneer S-DF1-K (15-100W, 8 ohms)
1 - Pioneer PD-F407 25 Disc CD Player
1 - Pioneer CT-300 dual tape deck
1 - Kenwood KD-491F turntable

C. Possible choices are (keeping in mind that the power output should be less if not equal to 100 watts and a turntable/phono input):
i. Onkyo TX-8522 Stereo Receiver;
ii. Yamaha RX-397 100 Watt Natural Sound AM/FM Stereo Receiver;
iii. Sony STR DE695 AV receiver;
iv. Teac AG-790 200 Watt Stereo Receiver;
v. Denon AVR 888 - AV receiver - 7.1 channel.

Some of the above also includes feature(s) to hook up to your video system. Some may even require a fifth speaker (subwoofer).

Incidentally, you can also choose another brand/model even without a turntable/phono input. As initially posted, a turntable/phone to line level pre-amplifier is only required. Here are some examples:
a. XP200 Turntable Preamp - Nano Series;
b. Pyle® Pro PP999 Phono Preamplifier;
c. Pro-Ject Phono Box Turntable Preamplifier;
d. Radial J33 RIAA Turntable Preamp Direct Box

Good luck with your project.

Apr 29, 2008 | Audio & Video Receivers

1 Answer

Turntable failure


The drive wheel has probably dried up and is just slipping. Also, any grease that was in there has probably turned more to glue. This unit will need some TLC and some time to get all of the old grease out. A re-lube as well as a new wheel (if still available) and you will be good to go!
Dan

Mar 26, 2008 | Audio & Video Receivers

2 Answers

TURNTABLE PROBLEM


You have a VERY nice turntable! TWO quick questions: 1) How do you define "minimal" volume? It is not NECESSARILY unusual that your turntable / receiver combination will have lower volume than your tuner, CD or DVD player. What happens when you CRANK IT UP?! Don't worry about the position of the volume control! 2)Are you changing the turntables output settings via the switch under the platter? Please post a reply and we'll go to the next step! Note: Ceramic cartridges are pretty much extinct. They were strictly low-end, low-cost, low-fidelity devices used in cheap audio systems of "yesteryear". Have you ever seen a BSR or Garrard turntable? Or your grandad's Magnavox Console Stereo? THAT'S where you'd find a ceramic cartridge!

Jul 12, 2007 | Teac AG-V1050 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Audio & Video Receivers Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a Teac Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...