Question about Sterling Plumbing 1500D-36S "VISTA PIVOT" SHOWER DOOR

Open Question

How do you restring a 3 piece shower door - Sterling Plumbing 1500D-36S "VISTA PIVOT" SHOWER DOOR

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loss of water presure


Depends upon the brands of the shower fixture

Apr 06, 2014 | Maax RainForest - Three-Piece Corner...

1 Answer

Need to remove silicone from 4 part shower stall to repair & reinstall


I think you should contact to a professional who can remove this shower stall very easily without any risk. You can also have a look at shower enclosures for having such bathroom stuffs in affordable price.

Jul 14, 2012 | Home

1 Answer

Replace shower door


Hi

You did not mention any additional information about your problem except replacing shower door.However use basic hand tools to complete the job.

Try this following general steps :-
1. Remove the doors by lifting up on one door at a time and then pulling each out. The top of the door has rollers attached to it, and the rollers rest on the inside of the top rail of the frame. Set the doors aside.
2. With your drill, remove the two screws on each end of the top rail, located on the inside of the shower frame. Then lift off the top rail of the shower frame.
3. Use your box knife to cut the caulk on the side and bottom rails of the shower frame. Shower frames are caulked on the outside where they meet with the walls and floor of the shower.
4. Use your drill to remove the screws from the side rails. There will be two screws on each rail, securing it to the shower stall. Then, take the rails out. Remove the screws from the bottom rail and take it out.
5. Use your tape measure to measure the old side rails, top rail and bottom rail. With a pencil, mark the lengths on each new rail. Use your hacksaw to cut each rail. Hold a side rail in the exact location where the old rail was located. With your pencil, mark the screw holes on the shower wall. The new shower frame screw holes may not line up with the old shower frame screw holes. Use your drill and 3/16-inch drill bit to drill new holes if necessary. If the shower walls are ceramic, use the concrete drill bit. If the shower walls are fiberglass, use the multipurpose 3/16-inch drill bit.
6. Insert the 3/16-inch anchors into the holes that you drilled. Put the side rail into position and insert the screws into the holes. Use your drill and Phillips head drill bit to tighten the screws. Place the bottom rail into position and mark the holes. Drill new holes if necessary and install the anchors. Insert only one screw at the end where you installed the first side rail. Lift up the loose end of the bottom rail and slide the second side rail into place. Mark the holes. Remove the side rail and drill the new holes using the 3/16-inch drill bit. Insert the anchors and put the side rail back into place. Insert the screws and tighten with your drill using the Phillips head drill bit.
7. Set the top rail directly onto the side rails. In each end of the top rail, insert the two self-drilling screws until the top is secured to the sides. Insert the tube of clear caulk into the caulking gun. Cut the end off of the tube with your box knife. Caulk the side rails and the bottom rail to the shower walls on the outside of the shower. Re-hang the shower doors by lifting each door and placing the rollers on the inside of the top rail.
Also giving you some links from where you can find a detailed information regarding replacing shower doors.
http://www.diynetwork.com/how-to/how-to-replace-a-shower-door/index.html
http://www.thisoldhouse.com/toh/how-to/intro/0,,214441,00.html
Thanks for contacting fixya.com
Please do get back to us for further query.

Jan 20, 2012 | Home

1 Answer

I have a sliding shower door in my bath but unfortunately, I do not know the manufacturer of it. It's about 14 years old and the bottom plastic part that is attached to the bottom of the door has broken...


there is a good chance you won't find this part for a number of reasons,...you'd be best to either change the door (with a "basco" door, great company) of if your feeling some oats, make the part you need.

Nov 20, 2009 | Sterling Plumbing 1500D-36S "VISTA PIVOT"...

1 Answer

Need installation instructions for sliding shower door...probably #5475. When reinstalling, the inside door is swinging with nothing to secure the bottom.


not sure what you mean when inside door "swings" on a "sliding" door,...i'll assume you need the "inside door guide", a little plastic piece that screws with one screw to the main threshold,.....

Nov 02, 2009 | Sterling Plumbing 1500D-31S VISTA PIVOT...

1 Answer

Spartan brand curved glass shower door installation info needed.


curved cut glass will not always be the exact dimensions though they may look identical there should be several set screws on both the door glass frame and the shower glass frame that can be loosened and reset to make the door fit and close and open more properly without seeing the showwer itself i can not tell you exactly where they are but they should be either visible or behind a facade piece of metal frame

Aug 27, 2009 | Sterling Plumbing Sterling& By-Pass Shower...

Not finding what you are looking for?
Sterling Plumbing 1500D-36S "VISTA PIVOT" SHOWER DOOR Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sterling Plumbing Home Experts

Donni Steen

Level 3 Expert

659 Answers

john h

Level 3 Expert

12650 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Sterling Plumbing Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...