Question about Linksys WUSB54GSC Compact Wireless-G USB Network Adapter w/ SpeedBooster [WUSB54GSC] (LS-SB54GSC)

1 Answer

My installation is stuck at 30%

I put in the disk, and agreed to terms of use. It then started to install and now it is stuck on 30%. All it says is please wait.... I have been watching it for about ten or fifteen minutes now.

Posted by on

  • 2 more comments 
  • Anonymous Feb 01, 2009

    I have the same problem -- stuck at 30% but this time with Linksys Wireless-G PCI adapter with SpeedBooster (model: WMP54GS-UK)

  • St Ann Feb 01, 2009

    I have the same problem -- stuck at 30% -- but with a Linksys Wireless-G PCI Adapter with SpeedBooster (model: WMP54GS-UK)

  • Anonymous Feb 02, 2009

    STUCK AT 30 PERCENET

  • MARY E Feb 02, 2009

    STUCK AT 30 PERCENT

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 51 Answers

  • Hey, Have to also make sure the wireless adapter is not plugged while installing (only when prompted to plug it in)
  • You can try downloading a NEW installer from the Linksys website. (maybe the cd is scratched?...) Here is a link to the Driver/installer, for your adapter. (This is a WindowsXP Driver)
  • Try installing the driver using that, and then plug in your wireless adapter when the setup program prompts for you to do so.
Report back if there are any more complications or issues that occur during the above process,
+
I'll be happy to assist you further.
I Hope This Helps.

Posted on Jan 26, 2009

  • xiller8er
    xiller8er Jan 26, 2009

    For The Link to the Driver I Posted above.

    *Save the file (preferebly to the Desktop for easy access)
    *Unzip/Extract it.
    *Open the Unzipped Folder, and run the Setup Program.

    *you might already know all of this, but just in case. ^_^


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am using Windows 7 Ultimate. Why did the LAN vanish and internet stop working?


When it did work before under Windows 7, there should not be a problem with any driver.
Put the Windows disk in the DVD player and start the disk. Say you want to install Windows, Then the computer gives you some options, choose the repair Windows option. Don't do the new installation, because you would lose all data.
Now it is the network, next time your Hard Disk. Did you make a backup already?
I would advice to make a backup, before you try to solve this problem.

Apr 23, 2015 | Network & Wireless Adapters

1 Answer

I want to put the svw322u into a computer i have upstairs but the computer will not read the disk it came with, thankyou for your help


If the USB comes with a installation CD so i guess the put the "DISK" means you need to open the files on the CD and click on the setup program to install the driver.

Apr 07, 2013 | Network & Wireless Adapters

1 Answer

I install the software from the disk after i install thew usb drive it keeps saying need to install usb adapter


click start control panel administration tools computer management device manager scroll to network adapters you might see a yellow question ? exclamation ! mark or a red X
the driver will need to be updated right click to update driver
if you dont have the disk with the driver you will need to download one
http://download.cnet.com/netgear-wg311v3-802-11g/3000-2112_4-78104.html
hope this helps you

Apr 09, 2012 | NetGear WG111V2 Wireless Adapter

7 Answers

I just got a wireless n network adapter. for some reason, it won't work. the light is flashing green and when i tried to put in the installation disk, the disk wouldn't run, saying that it is a mixed media...


If the light is flashing but the disk does not start you need to go into system settings/console/startup and turn the "Disk" auto startup ON. It was set to off for me by default. Restart and it will install the update from the disk.

Dec 17, 2009 | Microsoft Wireless Network Adapter Xbox...

2 Answers

Replacing ethernet PCI card 10/100 by gibabit 1000


When you replace and install LAN card you need to install also the driver. Be sure that your onboard ethernet PCI card are disabled in BIOS. So that the new install LAN card are working.

Regards
PCmania

Sep 26, 2009 | Dell Ethernet Card Network Adapter

2 Answers

I am attempting a rebuid from a disk crash - when I install windows - it can't get to the net so I can't download drivers


either download the computers network driver on another computer and put them on a disk or usb drive and copy them over or pop in a network card that you have the disk for and download the driver that way.

Sep 11, 2009 | Acer InviLink 802.11b (91.49C10.002)...

1 Answer

Can't link to internet using Linksys WMP54GX-UK Wireless adapter


now you need to completely uninstall the software for that download this software calld revo uninstalled whick will remove all the traces of the linksys wireless software
link to download the revo uninstaller _http://www.revouninstaller.com/revo_uninstaller_free_download.html.
after the software gets uninstalled restart the computer,
when the computer turn back on,press f8 before you see anyting on the screen,it should give you windows advanced options,from that option go to sade mode with networking,now try installing the software if it works good if it doesnot then restart the computer to the normal mode and then try installing the software if you have any firewall installed in the computer try disabling the firewall and then try the installation..
this is a link from where you can download the software directly from the linksys website _http://www.linksysbycisco.com/US/en/support/WMP54GX/download....
hope this works for you...let me know if you are stuck..
vedhick

Feb 07, 2009 | Linksys WUSB54GSC Compact Wireless-G USB...

1 Answer

Installation is stuck at 30%


hi
may be the installation software is not working,what you need to do is take the cd out from the computer and just plugg the wireless adapter,when you plug in the wireless adapter it will tell you to insert the cd that came with the usb card so that the software can be installed,once you see this message insert the cd and then follow the setup screen(imp thing:incase you see the screen of the linkys installation donot follow that,follow the windows software setup screen) this will install the software and i am sure the software will get installed if the software has totally gone bad then here is a link you can donwnload the software from website and then try the installation
link for linksys wusb54gsc for :
http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109934&packedargs=sku%3D1154470123093&pagename=Linksys%2FCommon%2FVisitorWrapper
vedhick

Jan 26, 2009 | Linksys WUSB54GSC Compact Wireless-G USB...

1 Answer

Lost the disk


you should be able to get the driver from www.netgear.com. In the support section. Download straight to disc so you always have it handy and then normal install - think you will have to unzip files first if I remember rightly

Feb 12, 2008 | NetGear (IM-WG511T) Wireless Adapter

1 Answer

Super g wireless install


I HAVE SAME PROBLEM LIKE TRUCKER 77546 .I NEED A DRIVE OR SOME THING TO INSTALL BWI 715 SUPER G802.11g/b ON MY NEW COMPUTER .BECAUSE I HAVE LOST MY SOFTWARE DISK FOR IT! THANK YOU.

Feb 11, 2008 | Blitzz Technology BWI715 Super G 802.11g/b...

Not finding what you are looking for?
Linksys WUSB54GSC Compact Wireless-G USB Network Adapter w/ SpeedBooster [WUSB54GSC] (LS-SB54GSC) Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Are you a Linksys Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...