Question about Baby Lock Ellure

1 Answer

Babylock Ellure thread issues

I have an Ellure that is only a year old. I just had it serviced in November because the needle bar was cracked. I just completed sewing a quilt, and now I'm trying to embroider. Every time I embroider, I get a big birds nest underneath. So I've threaded, rethreaded, and threaded again, changed the needle, and changed and rechanged the bobbin to no avail. Also, my bobbin thread is showing on the front of my design. I've changed the thread tension to -8 (the loosest) and it does not help at all. I've tried to change every setting I know and it still looks terrible. It seems that my embroidering gets screwed up every time after I'm doing normal sewing. Please help!

PS - the place where I bought my machine is no help. Even though I've been embroidering for five years, they keep telling me I don't know what I'm doing.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

I have the same machine and love it. Sometimes if the thread is old that will happen to me.  And also I spray the thread with static guard before i thread the machine in dry cold weather.  Since you said you are an embroiderer I assume you are using the same weight thread top and bottom. The other thing that causes that on my machine is if there is a nick on the spool of thread I am using and the thread catches just a little as it comes off the spool.  I use a fine nail file and smooth off the edge where the little v is to reattach the thread when you are finish using it.  I never use them. You do sew a little and cut off the tail off the top thread before you let it go through the rest of design. I hope you have found the solution but I learned these tricks while having the same problem as you.

Posted on Mar 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WHAT DO I DO TO GET MY BABY LOCK ELLURE ESL TO PICK UP THE BOBBIN THREAD?


You have your bobbin inserted into the machine spinning in the wrong direction. take the bobbin out and flip it over and wind around needle plate guide and cut. Look at the little pictogram on the plastic part of the machines throat plate. It shows which direction the thread should spin off the spool when you drop the top loading bobbin into the bobbin case.

Cheers,
Kelly
San Diego, CA
Embroidery Services

Aug 30, 2014 | Baby Lock Ellure

1 Answer

The top thread keeps shredding/ripping while trying to embroider. Using a babylock ellure.


as you thread the machine check for burrs, also on the needle plate

Feb 24, 2014 | Baby Lock Ellure

1 Answer

CONSTANT Check upper thread warning on a Babylock Ellure


try changing the needle
check for burrs on the needle plate and in the bobbin area
if the problem persists then the machine may have to be checked
again

Nov 26, 2012 | Baby Lock Ellure

1 Answer

Thread continues to tangle on Ellure Plus even after changing out needle, bobbin, etc. Noticed that a small 'bar' was across front of feed dogs-pushed this back to the left but problem contin


Your post made me laugh with the funny bone remark. :) I'm glad you found and posted a solution to your own problem. Bravo!

Happy sewing.

Sep 15, 2012 | Baby Lock Ellure

1 Answer

On a babylock elegante the bobbin thread shows,


Have you reset the tensions for this machine, look in your manual and follow directions. If this is an Elegante there is also a set of instructions on the machine. On the LCD screen there is a picture of a sewing machine with a question mark, touch it, find Troubleshooting and touch that then find the problem you are having and read. If this does not help take it to a Brother dealer and have it reset so as to keep you machine in good running order.

Jul 05, 2009 | Baby Lock Ellure

1 Answer

Thread problem


I'm not sure which thread you are referring to, its either the bobbin thread (under) or the needle thread (above.top)
I'm sure you can find some helpful advise here on the baby lock site
http://www.babylock.com/support/faq/?FAQ=10

Jan 24, 2009 | Baby Lock Ellure

1 Answer

Not picking up bobbin


http://www.babylock.com/embroidery/ellure/

Have you looked at your manual or bought the more expensive machine book from your dealer?
I wasn't happy at the addtional cost at the time (I spent $2200 US that day) BUT
I have found my book for my Evolve a VERY good investment (70 bucks, but worth every penny these past 2 years!) You may find the same for your Ellure.

Baby Lock have very good cust. service either on the web or right at your dealer. Most dealers will give free lessons upon your request.
I hope this helped, PS I'm a bit jealous.... I REALLY wanted that machine too!
Happy Sewing and Good luck with your baby!

Jan 23, 2009 | Baby Lock Ellure

1 Answer

Will the Elure ESL model accept a twin needle


The site shows a twin needle setting.

http://www.babylock.com/embroidery/ellure/

Have you looked at your manual or bought the more expensive book from your dealer? I have found my book for my Evolve a VERY good investment (70 bucks, but worth every penny these past 2 years!)
Baby Lock have very good cust. service either on the web or right at your dealer. Most dealers will give free lessons upon request.
I hope this helped

Jan 20, 2009 | Baby Lock Ellure

1 Answer

Babylock ellure safety device


I have the same problem, I have done what the book says but no luck yet. Have you figured out what happened? And do the experts really check the questions? Cause I asked a question awhile ago, and no answers. Help!

Mar 22, 2008 | Baby Lock Ellure

Not finding what you are looking for?
Sewing Machines Logo

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Lock Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Custom Exchange
Custom Exchange

Level 3 Expert

397 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...