Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

My hotpoint washingmachine WF860 comes with the message tESt

The message tESt appears on the display screen then the machine spins for a few minutes without water and then it stops. please can you tell me what the problem is

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers

It's on test mode for the factory. this comes on if you hold the on and start buttons together. can be reset by turning on while holding both on until dOFF appears.

Posted on Jan 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung b1113j washer


Kelly, try this. Let the machine auto clean. Then run a full cycle without a load at Normal setting. good luck

Dec 30, 2013 | Washing Machines

1 Answer

My Frigidaire Affinity front loading washing machine model #ATF6000FS1 won't spin when loaded.What's the problem?


sounds like you have something in your pump stopping the water draining it will not spin with water try unblocking the punp

Sep 27, 2012 | Frigidaire Affinity Washing Machines

1 Answer

Whirlpool Cabrio he washer stopped in drain and spin cycle. Won't drain or spin. drain hose seems clear. Powered off for a few minutes. When I powered on and pushed "start" it poured water in...


You may perform an automatic diagnostic test to check the machine functions and view any saved fault codes. Fault codes may also appear during the test when a problem is detected. Be sure the washer is in standby mode (plugged in with all indicators off, or with only the Clothes Clean or Done indicator on). Select any one button (except POWER, START, and STOP) and follow the steps below, using the same button (remember the button):

jahn27_452.jpg

If this test mode has been entered successfully, all indicators on the console are illuminated for 5 seconds with 88 showing in the Estimated Time Remaining two-digit display.
The program then automatically checks for saved fault codes. Record the fault codes and post it back.

Press the same button used above in activating the test to advance through the automatic test steps. The basket must be floating in order to agitate. Allow step C1 to complete before advancing to the other steps. Record any fault code shown during the tests and post it back including which step the code is displayed.

You don't have to accept or reject this post in order to add comment or information. But accepting the solution should you find it helpful and/or informative will not stop you from posting comments or additional information. You can still communicate with the expert should you need further advice regarding the issue stated herein.

Jul 20, 2011 | Whirlpool Cabrio WTW6800W Washer

1 Answer

Coin-operated Speed Queen washer: Model swtt21wn


speed queen double front load washer spinning without stop,please give some idea,thanks alot

Feb 21, 2011 | Speed Queen SWT921 Top Load Washer

1 Answer

Kenmore series 80, model 110-25842400, and serial number CR3353550 washing machine. I hadn't heard the machine work before the problem, and my wife said it was not working right (would fill with water and...


thabks for being through... i wish everyone was like you.. i get alot of Its not working? i hate that what does that mean... wish they were like you.. please check the harness on the motor while it is spinning.. i had that problem before... also it could be the speed selector switch.. sometimes it will get caught running 2 speeds at once and it will click like that...
checks these things and let me know if you need more assistance.... you sound like a tech.. wanna job? lol

Apr 12, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Every time we try to wash it comes up test and goes through a test cycle. Will not wash. Hotpoint WF860


Try the following, may work:
  1. Press the Start/Cancel button together until all the console Led's illuminate
  2. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  3. Default screen should return and you can select a new programme

Nov 26, 2009 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Hotpoint WF645 error message: test


press start once then press again then hold on/off and cancel for a few seconds should now turn test off should be ok now

Jul 15, 2009 | Washing Machines

1 Answer

My washing machine keeps coming up test can you help me


Hello Lainy34,

Give this a try, turn off then back on. When on appears on the screen press and hold the "start/cancel" and the "on/off" at the same time until "D:off" appears in the display. It should be back to normal after that. Hope this fixes it for you.

Thanks,
edgin96

May 12, 2009 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

puggy666

Level 1 Expert

47 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...