Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

Kodak Easyshare 5300--Where do you buy printheads?

My printer doesn't print anymore and I know it's not the black or color ink cartridges. It's been suggested that I buy new print heads, but I've been looking around on line and can't find any listings for printheads or where to buy them. Please help!!

Posted by on

  • Anonymous Jan 25, 2009

    I have the same problem. I have been scouring the internet in an attempt to find/purchase a new printhead for the kodak 5300 but am unable to find one. Help!!!

  • julie_bjarns Jan 28, 2009

    I called the number and the technician who answered had me perform a variety of tests on my printer. She confirmed that it does sound like my printhead went bad and is shipping me a new one for free. Thanks!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Kodak Expert
  • 285 Answers

Please call 1.800.421.6699 and select option 01 for prints missing black or color ink. Kodak will send you a replacement printhead kit for free. I hope this helps.

Posted on Jan 28, 2009

4 Suggested Answers

  • 30 Answers

SOURCE: Kodak EASYSHARE 5300....Problem:

You guys are putting the printhead/ink tanks in wrong. Please refer to your users manual on how to install the printhead.

Posted on Feb 08, 2008

  • 96 Answers

SOURCE: Printer Kodak Easyshare 5300 Will not print black ink

Here are the things you will be asked to try if you call support. They may fix the problems as well. Taking the printhead out and putting it back in is the big helper.

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
(If this is a 5100, do it in the home center ->? in the top right ->Maintainence ->Clean Printhead.)
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Posted on Aug 19, 2008

  • 1 Answer

SOURCE: How do you remove the printhead of a Kodak EasyShare 5300 printer?

I have tried what is suggested , I am not getting anywhere with this. I wasn't able to move my finger to the left of anything. What am I doing wrong!

TY
LindaPNY

Posted on Sep 22, 2008

  • 9 Answers

SOURCE: Printer Kodak Easyshare 5300 Will not print black ink

just remove the head printer and wash with warm water and lett.t dry and replace.t

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The printer only prints in black, white and yellow. I have replaced the color cartridge twice and it continues not to print in color.


Here are the basics to check from Kodak:

Verify that the ink cartridges are intact and securely inserted into the printhead, then make the same print.
  1. Lift the printer access door, then remove the ink cartridges from the printhead.
  2. Verify that the label on the ink cartridges is intact, and the cartridges are not damaged.
  3. Verify that only KODAK branded ink cartridges are installed.
  4. Insert the ink cartridges into the printhead, then press down firmly until you hear them click into position.
  5. Close the printer access door, then make the same print.
Hope one of these solves your problem.

Feb 01, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

My KodakEasy Share 5300 will not print in black.


92b8b47.jpgThe Kodak AiO printers 5000 series and ESP series PRINTHEADs has orange protective cap that need to be remove to fit on the printer carriage. For the ink cartridges 7b91cbc.jpgthere is also a orange protective cap.
Issue that its not printing black and deep clean and removing the printhead and reinstalling the printhead (reseating printhead) is already done and still no black when printing. The printhead should be replace. For futher assistance call 1 800 421 6699 Kodak AiO printer support line

Nov 16, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Printer Kodak Easyshare 5300 Will not print black ink


They overnighted a new printer head and free ink. We already recieved it. AMAZING. Thank you Kodak. They are awesome.

Dec 17, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Kodok easyshare 5300 printer/scanner


Print out a demo sheet. Press copy and photo at the same time. If the black isn't printing on this demo sheet, (the eyes on the two kids at the top are all white), you need a new printhead. Your's is probably clogged. contact kodak tech support. 18004216699. Option 1

Oct 10, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak Easy Share 5100 will not print after I changed black cartridge


Press copy and photo at the same time and print a demo sheet. Look at the eyes of the two kids in the picture, if they look like zombies, your printhead is clogged. try cleaning the printhead and print the demo again. If it's the same, you need a new printhead. Call Kodak.

Oct 08, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

4 Answers

Printer kodak easyshare 5300


You will need a new printhead call 1.800.421.6699 to request one. Please rate. Thanks!

Oct 04, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printer does not make black copies, it will print colored copies but not black kodak 5300 aio printer will not print in black. ink cartridge new.


Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Aug 26, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Kodak 5300 printer


Here are the things you will be asked to try if you call support. They may fix the problems as well. Taking the printhead out and putting it back in is the big helper.

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
(If this is a 5100, do it in the home center ->? in the top right ->Maintainence ->Clean Printhead.)
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Aug 12, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

The Infamous Kodak 5300 "Printhead Missing or . . ." Error Message


You need a new printhead from Kodak AiO support. After that is in and you do not have the error message anymore, download the latest firmware at www.kodak.com/go/5300downloads

Jul 13, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

1,149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...