Can somebody please help me? My son got a Lighting McQueen TV for Christmas and his grandpa just got him a DVD player. I have read all the manuals and can't figure out how to change the input. Can somebody please help me???
Look for any button either on the unit or the remote marked with common stuff like A/V, Input, Source, Aux or Au, Line, TV-VID. or try dialing in Channel 0, or 00, or 1, or Channel Down surf below Channel 2. Alternately, get into the menu and look for stuff concerning Auxiliary inputs.
If all else fails, you can run a DVD's audio and video line-signals THROUGH a VCR. Hookup the VCR to the TV's RF (threaded) connector using standard coaxial cable. Hookup the DVD a/v output lines to the Line-ins of the VCR. Tune the TV to Ch. 3, tune the VCR to Line-in or Auxiliary and press the play or tv/vid button on the VCR to force the DVD signal through on channel 3 onto the TV.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is an indication that you have a problem on the power supply on the main board.
Nowadays tv will automatically shuts off if there was a problem on the power supply.
It is quite technical so if you are not an expert I've advice you to send it to a repair shop or look for a qualified technician to isolate the faulty parts on the low voltage power supply and do re-soldering on some dry joints on the main boart because sometimes dry joints affect the performance of the regulated power supply...
hey 1st of all you gotta make sure that your son made tha right connections with the av cable (this is the cable with three different coloured pins) from your DVD to your tv. if this doesnt solve your problem then make sure you are using the correct av channel on your tv set that will allow you 2 play your DVD player because sometimes you cant play your DVD on thhe same av cannel you watch normal tv
i guess there a built in dvd player on the set and it could play most DVD format. but if you wish to use another dvd player hook up the dvd on the tv video output (DVD) to video input (TV) audio output to audio input the find the auxiliary button from either the tv or dvd
I have a lightning mcqueen 13' tv model# C1310ATV, and a little purple car-DVD player model # C8000 for my grandson, I cannot get dvd to play on tv? Should I hook it up(dvd) to back of tv or the front of tv, and if so, is there a switch over button for dvd to normal tv watching. TV is hooked up to Direct tv and plays fine. But can't get dvd to play on tv, I've tryed channels 2, 3, and 4. But no picture. Again is there a switch over button or auxiliary button or ???
Your help and consideration, concerning this problem will be greatly appreciated by my grandson and myself. Thanks
Even if you do get it connected you cannot copy from vhs to dvd as you have bought a vcr recorder with dvd player, not a dvd recorder.
You can only record to the vcr tape from a dvd, in the players controls.