Question about Maytag MAH2400A Front Load Washer

2 Answers

Maytag MAH 24 does not drain and makes weird humming noise

My Maytag MAH 24 gave me an error message of "nd" and it did not finish through the rinse and drain cycle. I paused it and powered down and when I powered it back up it now just makes a weird humming noise. Since there is still some water in the machine, the door won't unlock and it won't drain/spin. Is there a re-set button on this machine so I can get my clothes out?

Posted by on

  • 1 more comment 
  • thing1 Feb 20, 2009

    I have a Maytag MAH2400A Front Load Washer 2 years young now filled with water that won't drain during the drain cycle, and a door that won't unlock. is there a way for one to correct easily correct this?

  • everythingki Mar 23, 2009

    My washer is the same model, same problem, what is this? What's wrong? I tried moving the drain hose around, manually draining it and restarting the cycle after unplugging and after flipping the breaker. Anyone? 

  • Anonymous Apr 05, 2009

    I also switched to Tide toal care... my washer is 4 years old.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I also have this problem. to get the door to unlock, just unplug the washer and it should open in a min or two. you will hear a click. you may have a mini flood but at least you can get your cloths out and bail out the water. my problem started when i began using a new detergent from Tide called total care. Still tying to get the pump to work.

Posted on Mar 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem...How do you manually unlock the door so I can bail it out???

Posted on Jan 23, 2011

2 Suggested Answers

TheMazz
  • 78 Answers

SOURCE: ND Error code

Error code "nd" means it is not draining. Click on this link to get the user manual:

http://laundry.manualsonline.com/manuals/mfg/maytag/mah24.html

Then click on "GET THIS MANUAL" to download the manual.

Not draining can be caused by the controller, pump, solenoid valve, or clogged drain.

If this information was useful, please select YES to the first to rating questios. Good Luck and thank you!

Posted on Oct 22, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ou Maytag Neptune Washer MAH-3 will not drain.


This problem was answered a couple of years ago in detail. A search should produce it. Search the name Scruggs.

Sep 02, 2014 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

The washer ran fine then stopped with water not draining. When I push the on button I get a buzz or humming noise .nothing moves. There is no error code.


Sounds as if you have something doen in the pump preventing it from draining and in doing so shutting the machine off as a safety action. I think you can actually access the pump from the rear of the machine. just unplug the machine, prepare to get wet, take the back of the machine off, take the lines off the pump and check for the blockage.

May 27, 2012 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

Washer stoped and did not finish rinse cycle now it makes a humming sound and code nd


Washer Error Codes ND IS -No Drain There could be two problems...The drain could be clogged, or the water pump could be bad. Or the belt that runs the pump is sliping or broken
  1. Unplug the washer from the electric outlet.
  2. 3Open the case, and disconnect the water hose from the outlet of the water pump.
  3. 4If you get water pouring out from the pump, then plug that up and check the hose to the sewer. If that is clogged, then you have found the problem.
  4. 5Some washers have a self cleaning filter in that hose somewhere. Check that to be sure it is working properly.
  5. 6Reassemble hose from step 3.
  6. 7Plug washer back in. If it pumps out now, then you are done. If it doesn't, then the water pump is probably defective, so replace it.
  7. 8Reassemble washing machine case...you're done...

Oct 11, 2011 | Washing Machines

1 Answer

My maytag washer mah-24 have a "nd" msg. which mean "not draining" and now i cannot open the door to take the clothes out. pls. help.


Unlocking the door:
Turn on the washer, but don't start any wash cycles. After a few minutes, the door should unlock itself.

Troubleshooting the "nd" message:
"nd" means "no drain". Empty the (now unlocked) washer and fill the wash tub with just enough water to see a bit of water at the bottom of the tub. Run a drain cycle and check a) if it drains and b) if there are any unusual noises while it is draining. If either event occurs during the drain cycle, the drain pump may have to be repaired/replaced.

Nov 25, 2010 | Maytag MAH2400A Front Load Washer

1 Answer

Has 33 minutes and a error message of nd--maytag Neptune tl



What is the Model number of your machine if its a FAV6800A or FAV9800A please read on.

The ND error code means No Drain.

You could have a drain line clog or a stuck Pressure Switch contacts.

See this post for past troubleshooting;

http://www.fixya.com/support/t2209123-code_nd_fav6800aww_serial_number_10

There are links to the Service Manual and I go over how to put the machine in Service Mode to check that the Pressure Switch is signaling properly.

Do you want to DIY the repair?

Let me know.........Rich

May 19, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

My washer stops before the rinse cycle because it can't seem to drain enough to start the spin cycle. I just had the drain motor replaced one month ago. I get the error code nd. I can sto the cycle and...


I'd love to say yes! The machine is stopping because it will not drain. This is what the nd code means. Therefore, it will not rinse (add more water) or spin because the water level is already too high and to try to "spin it out" would put too much pressure on the machine with that much water in it. Drain out the water by putting the drain hose below the level of the washer (this takes forever) and call your repair man back!

Feb 18, 2010 | Maytag MAH8700A Front Load Washer

1 Answer

ND Error code


Error code "nd" means it is not draining. Click on this link to get the user manual:

http://laundry.manualsonline.com/manuals/mfg/maytag/mah24.html

Then click on "GET THIS MANUAL" to download the manual.

Not draining can be caused by the controller, pump, solenoid valve, or clogged drain.

If this information was useful, please select YES to the first to rating questios. Good Luck and thank you!

Oct 22, 2009 | Maytag MAH2400A Front Load Washer

1 Answer

Error "nd" trouble


Nd, means no drain... a blockage in the drain line from the tub. Access from the back panel, you can remove the hose from the machine and check for blockages... this would be on the tub side of the hose... take the hose loose from the machine and check for blockage at the tub. squeeze the hose to check for blockage within.
take the hose loose at the pump to check for blockage there as well... watch out for water ...be ready to mop... let me know how you do..

May 26, 2009 | Maytag MAH2400A Compact Front Load Washer

1 Answer

Washer wont rinse


we had the same problem with ours....nd means not draining and that means that there is something, probably coins stuck in your drain hose. pull the drain hose out and check it for change and make sure something isn't stuck.

Jul 21, 2008 | Maytag Neptune MAH9700 Front Load Washer

1 Answer

Nd error essage


nd= no drain. loud buzzing noise sounds like something stuck in pump assy.remove the door(2screws) adn other 2 screws oppisite side, and hte front panel comes off giving you acess to the drain pump, pull the hoses and look for the obstruction

Mar 14, 2008 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Maytag MAH2400A Front Load Washer Logo

1,787 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4638 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...