Just recived, no instructions.
I have had exactly the same problem and am having a printhead sent to me,
To replace the printhead you take out the inks and then press up in the left hand corner there us a thingy/ lever to press and take it out.
That is in the pdf files that you downloaded when you bought the printer.
However when you put it back the ink lights will flash and then you press the start button and the calibration sheet will print and then you put that in the scanner right up by the yellow arrow and press start again.
I also was told to go to kodak 5100 downloads and download the up to date firmware which users of this printer need to do about every 4 months.
33 views
Usually answered in minutes!
×