Question about Uniden 2.4 GHz Expandable Phone System with Digital Answering Machine

1 Answer

What does the code E8 mean on the base screen

Phone does not work at all

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Code E8 showing on Uniden DECT cordless phone and answering machine. Answer after waiting on hold FOREVER. "Have you had a power outage?" me yeah probably we live in the Midwest "Well that particular code means there is a problem with the base that needs repair. You have a one year warranty." great now I got to find the receipt.

Posted on Jun 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have binatone luna 1220 phone but on the screen it says 'OUT OF RANGE' WHAT DOES IT MEAN?


If the display says out of range, it means it can't connect to the base station. Could be because it is to far away, or it is switched of, disconnected from the mains or just defect.

Nov 24, 2014 | Binatone Phones

1 Answer

Hi my phone says E8 on the screen whats wrong?


Hello, Ken.

From Uniden:

If there is an error code with an E followed by a number or "88" displays/flashes it would be an internal issue in the base unit. The unit would need repair.


Uniden does offer a limited 1 year warranty off the proof of purchase. The proof of purchase is required for warranty service. Uniden phones that are purchased in the US or Canada are only made for use in the US or Canada. Using this phone in other countries will void the warranty and also may damage the unit due to the differences in electrical standards. Also the unit may not work as specified.

http://www.uniden.com/repair/service.cfm

Hope this helps.







Jun 26, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Tring to add a handset to a att 5840 base!


The process is called "Registering."

From another fixya post:

1. Make sure to charge the handset battery pack at least 12 hours.
2. Using the soft keys on the base located below the base screen, press MENU.
3. Use the up or down arrow keys to select DISPLAY BASE ID.
4. Press OK. The base screen will display the 15-digit Base ID
code for about 30 seconds, then the unit returns to the idle
screen. Write down the Base ID code on a piece of paper.
5. At the cordless handset, use the soft key to select NEW.
6. Enter the 15-digit Base ID code using the number keypad.
7. Use the soft key to select OK. The screen displays PLEASE
WAIT!.
8. After about 45 seconds, the screen displays FOUND BASE. If the handset displays BASE BUSY TRY LATER, the base is in
use.

Mar 21, 2011 | AT&T 5840 Cordless Phone

2 Answers

My idect D1i phone keeps asking me to register


Hi , The phones which keep saying Register mean that they have lost the coding for the Base. To re-code them all you do is
press the menu button,
Press down Button 3 times until Setting comes on the screen,
Press the Button Phone/Ok,
The Display should display HANDSET SETTING,
Press the Button Phone/Ok ,
Then Press the Down button about 4 times until Register Comes on the screen,
Press the Button Phone/Ok,
Enter Base pin ( 0000 )
The Display will show REGISTER IN PROGRESS,
then immediatly press the Handset Locator Button on the Base and hold it in until you hear a tone.

Thats it , the screen should display Register Done.

Mar 06, 2010 | Phones

2 Answers

Phone on base showing it is "searching" for base.


check to see if the power cord is properly plugged in. You may have the phones on the wrong cradles, this wil cause them to search.

Apr 29, 2009 | Uniden Cordless Phone

1 Answer

How tomake outgoing calls with my american telecom digital cordless phone model#ra23634H


Thuis was hard to find but it worked for my ra2364hh's
note the phone stopped working in "tone dial" after 2 months and now functions with "pulse dial" only.....

Registration The handset and base will be pre-registered with a digital security code identification, which is stored in the phone’s memory, so that your phone will be ready to work right out of the box. However, your phone also has a procedure to allow you to re-register in case the link is lost accidentally. Enter menu, press the key - Select REGISTER and confirm PIN CODE will be displayed, enter the PIN code (the default value is 0000) and confirm. SEARCHING will be displayed while your handset is in registration mode Press and hold the Page key for 3 seconds on the base until the “In use” LED is ON, putting the base in registration mode SUCCESS will be displayed. This means the handset has located the base, and will get a handset number from the base that displays after the handset name for internal calling. If the handset does not locate the base, FAILED will be displayed and it will return to the non-located display mode that displays BS SEARCH with the antenna icon flash. Try again and check that you are not in an environment with interference. Note: Your base can register up to four handsets. If you have more than one handset, repeat the above steps to register each new handset.

TESTED IT 2 minutes ago and it WORKS.....

tony

Feb 23, 2009 | Phones

1 Answer

E17 and V141


I had the same problem after I moved to my new home.... The main E2600 base/machine/phone worked fine, but the satellite phone did not. It just kept flashing E-17.

I took the batteries out for a few seconds and reinstalled, and when I put the phone back on the satellite base, it found the main base and worked fine.

Hope this helps.

Dec 31, 2008 | AT&T E2600B Cordless Phone

1 Answer

E4 code on base station


i know that you dont want to hear this but that means it must be replaced. you should be able to get a replacment form where you purchased the phone

Dec 29, 2008 | Uniden TRU9480 Cordless Telephone

2 Answers

NOT SUB on head set


I had the same problem to fix it you press the menu button then scrool up untill you see REGISTER.

Press OK the display shows "BS 1 2 3 4" Enter the number of the base unit you wish to register the handset to.

The display shows "PIN code" (original code 0000) press OK the display shows "Search X (where 'X' is the number of the base you are registering to)

Press and hold the "page button" on the Base unit untill it beeps twice then after a few seconds the phone should work again.

Mar 14, 2008 | Cable_and_wireless CWD4901 Cordless...

2 Answers

E4 error code


I called Uniden about the same problem.  They say it is a code that means it is defective base unit.  I had purchased it within one year and they will gladly send me a new one.  I don't know if they will offer anything beyond the one year mark. 

They say it was a spike in the power lines that causes this error. 

Oct 09, 2007 | Uniden TRU9488 Phone

Not finding what you are looking for?
Uniden 2.4 GHz Expandable Phone System with Digital Answering Machine Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96576 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...