Start button is missing - Intermec CK71 Handheld Mobile Computer CK71AA2MN00W1100 Barcode Scanner

What is the fault you are trying to reset? Hobart dishwashers don't have a reset button, they reset themselves when the fault have cleared

Call a repair service to replace missing start button

Misfiring?  Have you checked the sparkplugs?  When was the last tuneup? A tuneup may fix that.

try changing the fuel filter

YOU NEED TO HAVE IT SCANNED TO ISOLATE WHICH CYL. PROBALY AN INJECTOR OR CONNECTOR OR CRANK SENSOR LEAD RUBBING INTAKE

Move your mouse to on the sides and top to see if you moved it out of the screen. It is possible to drag and droped it. What windows are you using ?

You might have computer problems.

Does the check engine light come on when it starts to miss?

check the EGR valve it is open maybe

unless you can get them free , don't waste you time on them
they were a cheap camera to start with

Hit CTRL-ALT-DEL

Task manager will come up.

Then click File, New Task.

Then type explorer.exe

This will load the things that you're missing. These things are probably missing because you have a virus. Make sure you do a scan.