Question about Hotpoint WMA64 Front Load Washer
I need to remove top cover
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
F01 is a motor faulty normally caused by the module,but sometimes thewiring to the motor plug that works loose as its to tight,give them alla good wiggle make sure there all in!
check this link for other error codes of hotpoint machines
Posted on Dec 15, 2008
Error F05 indicates pressure switch jammed on full.
Remove lower rear cover of washer.
Locate and remove large black hose fastened to drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well.
This should solve the problem.
Posted on Jan 10, 2010
Tips for a great answer:
Feb 27, 2011 | Hotpoint Washing Machines
Mar 27, 2010 | Hotpoint Ultima WF860 Front Load Washer
Jan 10, 2010 | Hotpoint Ultima WF860 Front Load Washer
Jan 31, 2009 | Hotpoint Ultima WF860 Front Load Washer
Dec 15, 2008 | Hotpoint Ultima WD72 Front Load...
Oct 19, 2007 | Hotpoint Ultima WF860 Front Load Washer
47 people viewed this question
Usually answered in minutes!