Wont print from internet, only header and footer

Check grounds. 3 main grounds are battery to engine, battery to body and engine to body. Sounds like yours is battery to body.

Rather than messing with it if you have the install disc, go to add and remove programs and delete it ,then reinstall it and everything should be ok.

Make sure you are installing CURRENT drivers/software offered by HP for your printer for Windows 7. Get it here:

https://support.hp.com/us-en/drivers/selfservice/hp-photosmart-e-all-in-one-printer-series-d110/4023244/model/4023245

Maybe the issue is not printer related. Maybe Word 2010 needs some sort of update. Windows Update will update Windows OS and other Microsoft products (I have a Windows 7 PC running Office 97, Windows Update treats it like Office 2003 and STILL updates it!).

Or, you could manually install them:

https://www.google.com/search?q=word+2010+update&ie=utf-8&oe=utf-8&client=firefox-b-1

Good luck.

I think what is happening is a valve body gasket is blown(very common) and the pressure is building in the sump and forcing fluid out the vent.Do you have a flashing od light ot a check engine light on?

whate yo mean please more detailes

Did you unplug the USB from PC, and turned the printer on & off, and reboot the PC. Then connect everything again, that usually cures that sort of thing. Turn everything off and on again... That sorts out a huge amount of problems...

Service Req C0082 CPU error (TLB miss exception [Load/Fetch]). Generally it is an envirnmental problem. Power the printer off and disconnect all cables. After one minute reconnect the power cable only and power on.
Then try a Starus Sheet, press the right arrow button 3 times. If the sheet prints then the problem may bea the network or corrupt documents been sent from the Netwrok or PC.
If the issue remains then you will need a new part so you will need ot contact Epson for further assistance.

Updating the driver will solve your problem. Go the Kyocera web page and look under legacy printers in the download area

hmmm..does a test page look the same..

Hi songman to sort you need to have the A4 paper in both cassettes one cassette needs to be A4 portrait(wide edge first) and the other needs to be landscape (short edge first)make sure you have the green paper size selector set correctly as well regards Dr Bob1