Question about Sony KP-43T70 43" Rear Projection Television

2 Answers

TV stuck in Aux mode, I don't have original remove

Remote was stepped on and TV went into Aux mode

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 379 Answers

Your TV model as listed is kp-43t70 , if this correct , on the front of the tv is TV/VIDEO , VOL UP , VOL DOWN , ETC. , press the TV/VIDEO button to cycle thru all the input modes , this will get you out of the aux mode . would you like a link to your manual that i just read ? please ask.

Thank You for using FIX YA !

J5,

Posted on Jan 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 81 Answers

Check your remote for a button labled Input, Source, A/V, TV/Video, etc.Also try keying in a channel eg.: press 0 then press 3

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What if you don't have original remote? Can you access this from tv buttons


Most of the time you need the original Sony remote for key functions in this set--What exactly are you wanting to do--not explained here.

Apr 11, 2012 | Projection Televisions

1 Answer

Mitsubishi hd1080 locked tv will not go on can i reset without a remote


A reset is only possible with an original remote----reset will not cure set not coming on---a model number would tell me more.

Feb 19, 2012 | Mitsubishi Projection Televisions

1 Answer

What is the code to use for universal remotes


Hi,
i found that your brand is not RCA universal remote code list..
if your are using RCA controller follow the steps below
1. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE
SEARCH.
2. Press and release the device button for the device’s code you are retrieving (TV,VCR or
DBS•CABLE). The INDICATOR LIGHT will blink once then remain lit.
Note: For AUX, press DVD•AUX
then the device button for the
code you are retrieving.
3. Press and release CODE SEARCH. The INDICATOR LIGHT will turn off.
4. Starting with 0 on the keypad, press the number buttons in order (0-9) until the
INDICATOR LIGHT blinks.
5. The number which causes the INDICATOR LIGHT to blink is the first digit of your code.
6. Repeat step 4 until you have retrieved all three numbers in code
if you are not having RCA controller or the method above is not works then buy new GE universal remote
solution using GE controller
1. Turn on the device you wish to program.
2. Press and hold CODE SEARCH/SETUP until the INDICATOR LIGHT lights, then release.
3. Press and release the device button for the device you are programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device button you are assigning to AUX.
i hope this will work
regards,
cseian

May 01, 2010 | Vivitek V37655 56" DLP TV

2 Answers

The Mitsubishi TV information : Model # WS 65311, Serial # 120372. I was setting up the Direct TV remote and the power button, volume and channels worked perfectly. I attempting to set up the Direct...


Mats Electronics has remotes for this TV 1-800-628-1118 $3.95 and up
Encompass Parts Distribution go to this website and type in your model number it will List Parts/ Prices available. In the mean time go to the Dollar store they will have a 4 in 1 RCA remote with code book for $6.00
I have used this remote on many different TVs it works almost all TVs.
The reset button should be on front of TV under a panel door .I also know that Mitisubishi has poor solder connections on IF and Tuner boards you may want to resolder theses boards.Your DirectTv book in the back should list TV codes for your TV to program their handunits to control your TV,if you cannot find your book then Call Them, they should be able to talk you throught in programing your TV to their hand unit.

Apr 25, 2010 | Projection Televisions

1 Answer

I'm looking for the remote code to program a directv remote to a Polariod model ttm-2410 tv. Know any?


direct tv gives this code 11641

Setup Instructions
  • Set the "Mode Switch" to TV.
  • Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
  • Enter the 5 digit Code above.

  • more possible codes 11326 11991 10765 12002 11992

    still more

    11523 11276 11498 11327 11328
    11314 11262 11962 10865 11316
    11286 11341 10178 10835*

    Codeslisted with an asterisk (*) are possible alternate codes for yourdevice. These alternate codes should operate the primary functions ofyour device in most cases (Power, Volume Up/Down, Mute).

    There is no other setup code indicated for your product
    that links to the model number you entered.

    Youmay still find a setup code that works for your device by steppingthrough the library codes in your remote. The following instructionswill help you do this. StepNSet
    • Set the "Mode Switch" to the desired mode such as TV for a Television.
    • Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
    • Enter the code "991" followed by the "device number"
      1. for Televisions
      2. for "AUX 1" devices - VCRs or DVDs
      3. for "AUX 2" devices - Audio
    • You can step through the setup codes for this mode by pressing the"Channel Up" key to go forward through the codes or pressing the"Channel Down" key to go back to the previous codes.
    • You can try out each code by pressing one or more function keys such as power, volume or digit keys.
    • When you've found the setup code that works for your device, press the "Select" key.
    This is all the information I could find, Poraroid does not offer a URC code.

    Hope this helps

    Please take the time to rate this solution


    Feb 01, 2009 | Projection Televisions

    1 Answer

    Panasonic PT-53WX42F-Stuck in Zoom mode


    on the bottom left side of your dish remote, there should be a button that says format, that should help you

    Jan 07, 2009 | Panasonic PT-53WX42 53" Rear Projection...

    1 Answer

    I have aux where the numbers should be how do i get that out


    Its seems that you have set the television to AUX. To cycle through the input line, you should have a Input, VCR or AV button on your remote control. Press that button untill you are back to your original TV line, Mike

    Nov 04, 2008 | Projection Televisions

    1 Answer

    Need to program a ge universal remote control to operate a Magnavox Total Control System TV


    here is the 3 digit codes ive found to try 586, 651, 720, 666, 731, 800

    MAGNAVOX ............ 0062 0004 0009 for digit codes
    ........................... 0456 0183 0226 0288
    ........................... 0008 0068 0075 0141

    Manually turn on the device (TV, VCR, DVD, etc.) you wish to
    program.

    2. Press and hold the CODE SEARCH/SETUP button on the remote
    until the INDICATOR LIGHT lights, then release.

    3. Press and release the button for the device you are programming
    (TV, VCR, DVD, etc.). For AUX, press AUX then the device button
    you are assigning to AUX. The INDICATOR LIGHT will blink then
    remain lit.

    4. Enter the three or four digit code for your device using the number
    buttons in the GE Universal Remote. After your code is entered the
    INDICATOR LIGHT will turn off.

    5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the
    POWER button. Your device should turn off.

    Note: If your device does not respond to the first code listed,
    repeat steps with the next code. If none of the codes listed for your
    device work for your device or your brand is not listed,
    try the Code Search method described below.

    USING CODE SEARCH FUNCTION
    If your TV, VCR, DVD, etc. does not respond after you have tried all the codes
    for your brand or if your brand is not listed, try searching for your codes by
    following the steps below.

    1. Turn on the device you wish to program.

    2. Press and hold CODE SEARCH/SETUP until the INDICATOR
    LIGHT lights, then release.

    3. Press and release the device button for the device you are
    programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will
    blink once then remain lit. For AUX, press AUX then the device

    Jun 21, 2008 | Projection Televisions

    1 Answer

    Programming rca universal remote for my toshiba tv


    I can't exactly help you, but can you tell me how you programmed the remote to your TV, because I cannot get mine to work...

    Apr 03, 2008 | Toshiba 42H81 42" Rear Projection...

    1 Answer

    Apex Digital GB4308 remote


    Programming the Remote Control Remote-control switchover Press VCR/DVD, SAT/CABLE or AUX to select the device you want to control. To program the remote control Press and hold VCR.DVD, SAT/CABLE or AUX for over 2 seconds until the LED on the remote control turns off. Release the button the LED will light again (the remote control enters the PROGRAMMING mode). Enter three-digit code number for your equipment. If the correct code number is entered, the LED blinks three times. If you enter a code not listed below, or you press any other buttons than SEARCH and 100+, the LED turns off. To search codes Press ad hold VCR/DVD,SAT/CABLE or AUX for over 2 seconds unil the LED turns off. Release the button (the LED wil light again) and the remote control enters the PROGRAMMING mode. Press SEARCH. Press CH+/- to search codes downwards or upwards. Each time you press CH+/-, the code number decreases or increases by 1 while the remote control sends the code number for POWER button on your device. If the desired code number is found,press 100+ to program the code for your device until the LED blinks three times.Then the remote control exits from the PROGRAMMING mode and returns to norml operation. Or press any other button to exit from the PROGRAMMING mode after the LED blinks rapidly eight times, and the operation is not active. To check the current code number Press and hold VCR/DVD, SAT/CABLE or AUX for over 2 seconds until the LED turns off. Release the button (the LED will light again) and the remote control enters the PROGRAMMING mode. Press 100+ . You may read the code numder according to the LED display status as follows. * If there is no operation within 20 seconds during the steps mentioned above, the remote control will automatically exit from the appropriate operation. Code Number First - digit 0 1 0 1 Second - digit 0 0 4 5 Third - digit 0 6 3 0 First - digit Blinks rapidly once Blinks once Blinks rapidly once Bliks once Secod - digit Blinks rapidly once Blinks rapidly once Blinks four times Bliks five times Third - digit Blinks rapidly once Blinks six times Blinks three times Bliks rapidly once

    Jan 05, 2007 | Apex Digital GB4308 43" Rear Projection...

    Not finding what you are looking for?
    Sony KP-43T70 43" Rear Projection Television Logo

    Related Topics:

    67 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sony Projection Televisions Experts

    Steve Sweetleaf
    Steve Sweetleaf

    Level 3 Expert

    1128 Answers

    Ap12
    Ap12

    Level 2 Expert

    103 Answers

    Jason Harris
    Jason Harris

    Level 2 Expert

    256 Answers

    Are you a Sony Projection Television Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...