Question about Maytag Neptune MAH5500B Front Load Washer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Fl error on washer
Hello there :
I am hoping that i am reading this right it looks like you said a fl error right and if so please read this whole solution that i have provided below
FL Flood Condition FL flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lack condition in order for FL to be displayed
With an overfill condition, the beeper repeats a warning every 10 seconds with no time-out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit.
Press STOP/CANCEL to clear the display.
If this condition continues have the machines water level switch replaced or repaired
Hope this is very helpful for you
Best regards Michael
Posted on Feb 11, 2010
Tips for a great answer:
Oct 29, 2015 | Samsung Washing Machines
Oct 24, 2015 | Samsung 3.9 Cu. Ft. VRT Steam and Power...
Jun 02, 2015 | Samsung 3.7 cu. ft. High Efficiency Vrt...
Dec 25, 2014 | Samsung 4.3 cu. ft. VRT Plus , Steam and...
Oct 20, 2014 | Samsung WF431ABW 3.9 cu.ft. VRT Steam and...
Oct 06, 2014 | Samsung 4.3 cu. ft. VRT Plus , Steam and...
Nov 03, 2013 | Samsung 3.7 cu. ft. High Efficiency Vrt...
Nov 02, 2012 | Samsung 3.5 cu. ft. High Efficiency VRT...
493 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: