Question about Pioneer VSX-505S Receiver
No bass no deep tones just tweeters and midrange from my cerwin vega d-3...
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
That type of subwoofer is not used with this receiver. This receiver actually outputs no power for a subwoofer, therefore only needs a plain ol' rca signal wire. This is due to the fact that you need a powered sub... one that you plug in to the wall and it has its own built in amp. you simply run an rca from yyour 505s to that sub.
Posted on Jun 24, 2008
SOURCE: I have a Pioneer Elite
The problem was actually at the speaker. The speaker I was using was a Kef speaker and it was missing a metal bar running across both negative terminals in order to power both the tweeter and woofer.
Posted on Nov 04, 2008
clean the all push buttons by using isoprpylalchohol.(surgical spirit)and dry well .i think all the buttons are short by itself.the problem is still there please check the power supplu secondary side smoothing condencers related to system control power section.
Posted on Jan 20, 2009
There may be a subwoofer mute function on your amp. The sub out is nothing more than a preamp output with a low frequency response. It is meant to be amplified by an external amp. Either check your powered subwoofer for operation or look through your operators manual for a sub mute function.
Posted on Feb 11, 2010
Your M-91 has a 8 ohm rated amp. Your CV's are 4 ohm speakers. When your reduce the resistance the amp see's it requires the amp to work harder and will max out at much lower volume knob levels.
Simply put, you have big speakers that require big power. You receiver is not capable of providing the big power you need and will only cause damage to your speakers and receiver.
Buy a larger dedicated amp for your speakers as you will never hear the full potential of your CV's from any receiver. Both great components; just not a good match for each other.
Posted on Feb 22, 2010
Tips for a great answer:
Sep 27, 2012 | Cerwin Vega E-712 Main / Stereo Speaker
May 10, 2017 | Audio Players & Recorders
Jun 22, 2010 | Cerwin Vega E-315 Speaker
Jan 01, 2010 | Cerwin Vega CLSC-15 Main / Stereo Speaker
Nov 04, 2008 | Pioneer Audio Players & Recorders
Nov 08, 2007 | Pioneer VSX-453 Receiver
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: