Question about Toshiba Satellite Computers & Internet

1 Answer

F3-f100-003 error code what does it mean?

Just put a new harddrive into this computer and the error code above comes up I boot the computer from the disc drive with the intel disc for the computer and the message no operating system found comes up how do i reboot the operating system into the computer? and what is the error code all about

Posted by on

  •  johnny rebel
    johnny rebel Apr 02, 2015

    How To Fix Toshiba Error F3-ff00-0026 Errors Your operating system is: Windows 8.1 This repair method is compatible with your OS. Summary Toshiba Error F3-ff00-0026 and other critical errors can occur when your Windows operating system becomes corrupted. Opening programs will be slower and response times will lag. When you have multiple applications running, you may experience crashes and freezes. There can be numerous causes of this error including excessive startup entries, registry errors, hardware/RAM decline, fragmented files, unnecessary or redundant program installations and so on. Resolution You can dramatically improve the speed of your machine when you address all the problems just mentioned. In order to fix your errors and improve the speed of your PC, it is recommended that youdownload the 'Toshiba Error F3-ff00-0026 Repair Tool'. This is an advanced optimization tool that can repair all the problems that are slowing your computer down. Download the Toshiba Error F3-ff00-0026 repair tool Recommended: In order to repair Toshiba Error F3-ff00-0026, use this version of Reimage . This repair tool will locate, identify, and fix Toshiba Error F3-ff00-0026 errors. Your computer should also run faster and smoother after using this software. File Size6 MB CompatibleWindows XP, Vista, 7 (32/64 bit), 8 (32/64 bit) LicenseFree evaluation version. To unlock all features and tools, a purchase is required. Downloads361,927You need to understand just what causes these errors and slowdowns in performance. There are a lot of reasons why Windows errors happen, including having malware, spyware, or programs not installing properly. You can have all kinds of system conflicts, registry errors, and Active X errors. The registry on your computer will accumulate errors over time. It's just a fact of life in the computer world. This happens as programs are installed and modified, or even removed. Over time the errors and conflicts begin to accumulate and add up, slowing down the effectiveness of your PC. When you remove programs from your PC, they don't always take out every single file, and some can be left there to interfere with your PCs functions. Most of the time people don't even realize this is going on. But over time, the evidence will appear. Computers need to be regularly maintained, just as you would a car. We highly recommend downloading Reimage and using it to optimize the stability and performance of your PC. This software program has already proven its ability to locate and repair Windows errors. It can delete junk files, decrease your startup time, restore lost memory, defragment your hard drive, remove spyware and malware, and lots more. Reimage will get your PC running smoothly again, and make it a lot more fun to be using your PC by maximizing its total potential.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

The new HDD apparently has no OS. what is what the msg says.
boot to Bootable media with to install a NEW OS. or boot to your Recovery Media. and let it restore to Factory.
if this does not help - then provide more info.

Posted on Apr 02, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pankaj_dic
  • 1250 Answers

SOURCE: Toshiba Satellite M305D S4831 PC Notebook

go to the bios of your laptop , check whether the hard disk is detecting or not, if not, then its the problem of your hard disk,

Posted on Oct 28, 2008

  • 28 Answers

SOURCE: VGN-FJ290 sony vaio

One of my clients' old Maxtor drives finally went South on her this weekend, just as I was in the middle of migrating her data over to her brand new computer. The drive just suddenly died- whir!, click!, spin down, vanished, kaput. I couldn't get it to spin up again on a few subsequent power-cyclings of the machine, and not wanting to damage either of her computers, I took it back to my shop to try to revive it. I put it in three different computers (running Windows and Linux), but it refused to engage in any of them at all; all I got from the drive were a few sick-sounding whines, and one of the controller chips began to get really hot.

I was just about to call her and give her the bad news when I remembered a really off-the-wall fix that I read about ages ago: wrap the drive in an anti-static bag, wrap that in couple of zip-lock baggies, and stick the beast in the freezer overnight. I Googled around a bit and found that this was considered to be a huge "Urban Legend" by many folks, but others said that the fix had indeed worked for them. 

WTF I thought- the drive can't be much more dead than it is now, right? Soooo... into the freezer she went (the drive, that is, not the client). Well, this morning I pulled the drive out of the fridge and stuck it back into one of my test boxes, and the damn thing spun right up, and stayed alive long enough to let me pull all of the data off to another drive! 

As weird as it sounded at first- it worked, so I just thought I'd pass my experience on in case it can pull anyone else out of a similar jam

Posted on Dec 31, 2008

babes_ganda0
  • 381 Answers

SOURCE: operating system not found media test failure will not reboot aspire 3680

hi..try to remove unplug or plug in the Hard Drive,, if cant work you or nothing happens you need to re-place the hard drive.about files theirs nothing ways to recover the files if the Hard Drive is totally defective..Thanks..and GOOD LUCK...^_^

Posted on May 13, 2009

Suraido
  • 195 Answers

SOURCE: Windows xp pro will not boot with new hard drive

Its hard to tell just like this without having the computer in hand to check and test the jumpers and connection and all, but quick like this i think it might be a trojan virus that corrupted the boot sectors of the old hard drive, and when you copied the stuff from the old to the new, the virus followed and infected the boot sectors of the new one too. Try to reformat completely using the original windows install disk, and not the system restore/reinstall disk and reinstall windows after the format with the original windows disk again. If I was right, it should boot up OK with a fresh format and reinstall with the real windows CD, then install a virus scan and a spyware scan and scan and clean the old drive completely 2 or 3 times to be sure theres nothing bad left on it, then try to copy the whole disc, but skip the Windows repertory, the Program Files one too and the Documents and settings one also, cause those 3 are the ones most prone to corrupting a fresh install even if there is not any viruses in them. If it does not boot up OK after formating and reinstalling Windows though and says it's unbootable, then either there is a config error in the BIOS of the laptop, or the IDE controller that drives the disk is defective. If it's the BIOS settings, it's gonna be easy enough just changing the settings and won't cost you too much, and if its the IDE controller... then that's another story cause it's integrated in the motherboard like any other computer, so basically another computer will cost less than a new motherboard for a laptop. So if that is the case and the IDE controller is shot, you can still try to use an external USB drive to run the computer but not all computers support booting from the USB though, so before buying a brand new external drive, check the BIOS first to see if it does support USB booting.

Posted on Jul 08, 2009

  • 1 Answer

SOURCE: Toshiba Satellite PC ... Operating System not found

Enter BIOS by hitting F2. Go to Boot tab and change to default boot. I had the same problem and it worked for me.

Posted on Mar 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The oven beeped, the screen said F3, now the oven is locked. It smells like a hot wire


What does F3 mean on my Frigidaire stove when it sounds ...

www.shopyourway.com > Manage My Life > Questions
My Frigidaire range beeps and flashes F3. ... 790.92413202 and when I turn on bake or broil it just shows an F3 code on the screen what does this mean?

What does fault codes "F2" and "F3" mean on a Kenmore ...

www.shopyourway.com > Manage My Life > Questions
I have a Kenmore wall oven model 911.41059591 that beeps and flashes F2 or F3 and shuts off. ... The "F2" and "F3" fault codes is most likely indicating an open oven ... Next, the control panel will need to be taken off in order to measure the ...

Oven error code "F2" and how to fix it ' AskGene.com

www.askgene.com/.../oven.../what-means-the-error-code-"f2"-on-your-o...
Mar 26, 2007 - The error code "F2" will be displayed along with a beeping sound if the

Jan 27, 2016 | Kitchen Ranges

1 Answer

What dose F3 code mean


Amana Appliance Fault Codes - PartSelect

www.partselect.com/JustForFun/Amana-Appliance-Fault-Codes.aspx
Fault codes for Amana ovens, range, stoves including dual convection wall overs and 'big ovens'. ... F3-1 - Oven Temperature Sensor/Circuit Failure - Check wire connections and ... what does it mean when the oven turns off and f3 shows ... My Amanaagds902ww gas range flashes "Door" when attempting to light the oven.

Amana Gas oven Fault Code F3 - Appliance Repair Forum

forum.appliancepartspros.com/oven...ranges-cooktops/143114-amana-g...

Nov 17, 2010 - 2 posts - ‎1 author
Have a Fault Code F3 display on oven when trying to set oven ON. Researched ... Yes, your F3 code would indicate a sensor circuit problem, Jenn-Air Electric Range Code F3
4 posts
Mar 15, 2011
Range keeps giving error codes E0/F3 and E4/F3 and the ...
5 posts
Nov 22, 2010
Replaced Sensor Still Getting F3 Error
4 posts
Sep 20, 2008
F3 Error code on whirlpool Range
4 posts
Sep 10, 2007
More results from forum.appliancepartspros.com

Amana Fault Codes - Appliance Help O


Dec 25, 2015 | Amana Kitchen Ranges

1 Answer

PXE-E61 Media test failure, check cable


YOUR NEW HARDDRIVE SATA THEY HAVE A BAD SECTOR. UNEED TO CHECK DISK TO OTHER COMPUTER OR HDD REPAIR FOR FIXING THE BADSECTOR THE ACCESS UR HARDDRIVE. TTHEN PUT BACK TO YOUR COMPUTER AND THEN TRY TO PORMAT AGAIN IN XP OR OTHER WINDOWS OS.. TRY TNX

Nov 18, 2013 | MSI Wind U123-002US Netbook

1 Answer

Boot mgr error


This message usually means your "boot record" on your harddrive is corrupt due to a virus attack or harddrive failure. You will need to repair your boot record. If that doesn't solve the problem, replace your harddrive. If you don't know what this means, take it to a good computer repair shop. It's not something you want to do as a "newbie".

Oct 13, 2013 | Computers & Internet

1 Answer

F3-F100-0010


http://www.windowserrorhelps.com/error-f3-f100-0010-fix-toshiba-error-f3-f100-0010-the-simplest-way/

This website explains it well, along with a few options to fix it. Uses some computer jargon but is fairly easy to understand.

May 23, 2012 | Toshiba Satellite C655DS5043 Notebook

2 Answers

What is the word rebooting?


Depends on how it's used.

1) "Boot your computer up", may refer to simply turning the computer on.

2) "Reboot your computer", may refer to turning the computer completely off, waiting 20 seconds, then turning the computer back on.

3) The Windows operating system has a Boot Record, which is located on a Boot Sector on one of the Platters in the Harddrive.
These are the basic Windows files.

The computer can also be booted off of another source than the Harddrive.
It can be booted off of a Floppy Drive disk, USB thumb drive, CD disk, or from the internet, to name a few sources.

Therefore it can also mean to reboot off of one of the above sources, instead of the Harddrive.

1) http://en.wikipedia.org/wiki/Booting


2) http://computer.howstuffworks.com/hard-disk.htm


3) http://computer.howstuffworks.com/bios2.htm

Dec 09, 2010 | Computers & Internet

2 Answers

Mbr error


1. You can fix the MBR error by booting the Computer with a Windows Setup disk.

2. Boot from the Windows CD, and press "R" to enter the Recovery Console.

3. In the Recovery Console Enter your Administrator password.

4. Type in the following: bootcfg /rebuild

5. Then: fix mbr

6. Type: Exit


Good Luck!!!!!!!!!!!!!!!!!!



Sep 13, 2009 | Gateway Computers & Internet

1 Answer

Oven will not come on after replacing the probe. still gives an f3 code.


Hi

Thanks for using FixYa. F3 error code means the oven temperature sensor (above 3000 ohms) is open and you need to check for open wire connection between EOC (Electronic Oven Control - Clock) and the oven temperature sensor. If there is no wiring problem then you need to replace sensor. Please also check resistance of oven temperature sensor.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Sep 12, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

2 Answers

No bootable device


Error Code 0141 means no drive detected.
If that's your problem then you should take out the harddrive out and try it on another laptop or buy an external enclosure.
You can get them for $10
If it won't run on another computer that means the harddrive is bad but if it does run then it means you have a serious issue within the laptop componants.

Dec 24, 2008 | Dell Inspiron 6400 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...