Question about Mitsubishi WD-62525 62" Rear Projection HDTV

1 Answer

No picture or sound mitsubishi 62525

Black lines started going threw picture during normal veiwing then the screen started jumping all over the place.I turned tv off and then turned it back on screen was all blue.I turned tv back off and waited when i turned it back on it does nothing no sound or picture and lamp light was red.I replaced lamp. Lamp light is blinking green.After blinking green the lamp light turns red and unit shuts down.

Posted by on

  • markde1 Jan 26, 2009

    Thank you for getting back to me so quickly.markde1

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Capacitor failure is the most likely scenario the FMT ans Signal PWB would cause the picture interference and the power pwb would cause the lamp light to turn red and give a 34 code when the device/ input and menu buttons are pressed in together and held for five seconds. That chassis has issues with every board in the chassis having failed capacitors you can get repair kits for the V26 chassis at the follwing link that come with instructions. Your model is the V26 chassis. Heres the link.
http://servicemanuals.vstore.ca/

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scrolling lines


problem with the Picture tube.set graphics properties to check.

Jul 06, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi WD-62525 BLUE SCREEN NO PICTURE NO SOUND


I had the same problem and I found that it was 2 caps on the power supply board. I had both caps replaced and it worked perfect. While it is apart see if any other caps are bad( if they are puffed up in the center they are bad).

Jun 29, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi 62525 power reset issue


The reason the light flashes, is because the tv is still on, that is the fan is cooling off the lamp. It will go off after about 1 minute. This is normal.

Jun 19, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

I get lines running across my television (wd62525), especially noticeable when screen goes black. video noise? and it moves horizontally across the screen.


Sounds like interference or signal contamination. Does it occur on OTHER inputs? If not..then the input signal is corrupt, weak, has interference, wrong cable, or othewise defective.

Jun 09, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Tv brightness


I just bought an e 62525 on craigslist for $300 dollars. The guy had it in his garage because of a degraded picture... white out haze and virtually no black ... I surfed for similar issues most referring to the light engine. However; going back to basics. I removed the front panel assembly (approximately 16 screws including the center panel surrounding the card/rca ports in the front). The main mirror was spotless (in itself missleading) but the projection lense and the smaller mirror were frosted over with 3+ years of fine dust. I cleaned them with a simple cloth. I also noted that the foam insert surrounding the lense had gaps due to age which allowed excessive light sepage (the white out problem). I repositioned the foam as best I could. Then simply stuffed a black cloth over the foam but firmly arround the lense (keeping the foam intact as well). This blocked "all" light sepage. Bottom line is that I now have a picture quality that is flat out incredible! This is one bad mutha (shut yo mouth) tv. P.S. I'm just an average guy with an electric screw driver.

Nov 26, 2008 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi WD-62825 vertical lines, blue snow, picture jumping


I have the same problem with my tv, my tv tech said mitsubishi knows of the problem and knows how to fix it, but it would cost me 700.00 plus his labor to take out the chassis and send it in to mitsubishi, plus I would be without a tv for up to a month. this is b.s.

Oct 30, 2008 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

I have Mitsubishi WD-62525. Last week I turned TV on and there was no picture, on green horizontal lines across the screen. The picture then went black and I only have sound. The lamp indicator lite turned...


that is a common problem with that model you will need the v26 power pwb repair kit and the V26 FMT pwb repair kit. You can get both kits at the following link which includes the replacement capacitors and instructions on where the capacitors are located. Heres the link.
http://servicemanuals.vstore.ca/

Sep 26, 2008 | Mitsubishi Projection Televisions

1 Answer

T.V. Problems


sounds like the capacitors on the FMT or Signal PWB need to be replaced.

Jul 21, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Vertical lines WD-62525


Most likely the formatter board. Are these lines across the whole screen?

Mar 03, 2008 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

62' Mitsubishi WD-62525 little black and white squares instead of picture but I have sound


Mitsubishi list this problem and has a solution of replacing several small surface mounted caps and diodes. we have tried this repair 5 times and only successfully done it once. so replacing what is called the formatter board part # 930B924002 for around $ 350.00 usually repairs this type of failure, However changing this board is a time consuming thing and takes a lot of Patience. It is buried deep in the set and several other board have to be removed just to get to it

Oct 17, 2007 | Mitsubishi WD-62525 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...