Question about JVC HD-52G886 52" Rear Projection HDTV

2 Answers

Picture "blip" every 1-2 seconds

I just recent switched to Satellite TV with Dishnetwork. Since installation my TV has a blip or a 1/10th of a second cut out occurring about every 1-2 seconds. This does not happen with on screen programming with the input function of the remote. Otherwise the picture is great and no other defects.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Picture "blip" every 1-2 seconds

I had the same problem. Component worked fine from the Dishnetwork box but the HDMI blinked. I had a service rep for the TV come out to the house and he reset the TV and now all is good.

Posted on Aug 03, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers
Re: Picture "blip" every 1-2 seconds

Try unplugging the Dish box for a minute, then plug back in, is the program guide blippy?

Posted on Jul 14, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Connecting stellite receiver to 62hm95

hello when you conncet the satellite put the main aerial in to the satellite receiver R1 the a second lead from R2 to the tv. also you may have to connect a scart lead from the satellite to the tv this should take you to an av channel automatic good luck


May 07, 2010 | Toshiba 62HM95 62" HDTV

2 Answers

2 sec Blip to picture

Are you saying that this happens only when you are using the RF input? Is it not happening when you use the video input from the satellite receiver? Try a DVD player on the input of the video where you now have the Satellite receiver connected. Let me know exactly what you mean as i need a little more information so I can assist you.

Jul 14, 2007 | JVC HD-52G886 52" Rear Projection HDTV

1 Answer

Samsung 50" rear projection tv switches off after a few seconds

probably need to replace the Ballast and Power Supply Board. If lamp has not been replaced, I would replace that too. can call 1-800-samsung for nearest service center.

Dec 29, 2009 | Samsung HLN5065W 50" Rear Projection...

3 Answers

I have a 19" phillips lcd tv and when i turn the tv on the phillips screen comes up but when it is going the show the channel it shut off by itself how can i fix this problem?

Hello. I may be able to assist you. If you are using a direct cable connection from the wall outlet;
  • Check the incoming cable or antenna signal connection to ensure that it is properly secured to the TV's antenna input.
  • If the connection is good, perform the automatic installation again to search for all available channels.
If you are using a coaxial connection from the Cable or Satellite box to the TV;
  • Set the TV to the channel specified by the service provider.
  • Change the channels at the Cable or Satellite box to view the program.
If you are using a video connection (CVBS, S-Video, YPbPr, HDMI) from the source (DVD, Cable or Satellite box) to the TV;
  • You do not need to perform automatic installation to search for the channels.
  • Press the 'SOURCE' 071218044349_22024.gif button on the remote control repeatedly to select the correct input source.
If you are using an HDMI connection from the source (DVD, Cable or Satellite box) to the TV;
  1. Reset the TV and source by unplugging it from the power outlet for 30 seconds.
  2. Turn on the TV and press the play button on your source device. If the source is HDMI CEC compliant, the TV will automatically switch to the HDMI input.
  3. If your source is not HDMI CEC compliant, turn on the TV and switch to the HDMI input.
  4. Turn on your source.
If you are sure you have selected the correct input or channel but still have no picture or sound;
  • Try resetting the TV by unplugging it from the power outlet for 30 seconds.
  • Press the 'SOURCE' 071218044349_22024.gif button to select the correct input source.
  • Check the connection cables.
  • Try the connected source with another TV.
  • Connect a different source on the same connection of your TV.

Dec 14, 2009 | Projection Televisions

1 Answer

Picture and sound problem at 21" sony waga color tv

This is not a simple question to answer without looking at it, my recommendation is to call a service center in your area. That's my professional opinion.

Feb 04, 2009 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

Programming our dish network remote control. We do not have the remote code for our new Coby MODEL: TF-TV2214

1. Turn on your TV. 2.Press & hold the TV Mode button until all Mode buttons        light up. 3.Press red power button 4.Press the UP ARROW repeatedly (about 1 press per second) until your TV turns off. 5.Press # POUND The TV Mode button will flash three        times. 6. Press the POWER button to turn the TV on and try other buttons to make sure the code works. If you want to try another code, start over from step 1.
Below is the website for the online manual which will give further instructions.

In looking at the manual no codes are given for the Coby brand TV. If the above process does not work, you'll have to call DishNetwork for further assistance. It may be that the remote will not work for your TV.

Dec 06, 2008 | Projection Televisions

4 Answers

Green flashes then tv turns off

or a new lamp. you could first replace the lamp.
the screen might work fine for a couple of seconds, but then it fades away or deteriorates. This means the lamp is going bad.

Aug 23, 2008 | Sony KP-51HW40 51" Rear Projection...

2 Answers

Lightning strike

press menu and input both in together on the front of the TV and hold them both in together for 8 seconds then let me know if the LED blinks a two digit code.

Jun 10, 2008 | Mitsubishi WS-55315 55" Rear Projection...

1 Answer

Picture is dim and blurry

The screen probably needs to be degaussed, which will require either a degausser or a technician. Try turning the television off, and then unplugging it from the wall outlet. Then replug after 30 seconds and turn it back on. Also, try plugging any cables from a cable or satellite box into another set of in-ports on the back. If the problem persists, the screen needs to be degaussed.

Feb 22, 2008 | Philips 51PW9303 51" Rear Projection...

1 Answer

The tv turns on but no picture.

Mine did the same but no picture, just sound every few seconds for 1-2 seconds. I unplugged from the wall for 10 seconds and plugged back in, works fine now.

Jan 12, 2008 | Hitachi 60UX54B/55K 60" Rear Projection...

Not finding what you are looking for?
JVC HD-52G886 52" Rear Projection HDTV Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Projection Televisions Experts

easy alberta
easy alberta

Level 2 Expert

132 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66518 Answers

Are you a JVC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides