Question about Sony PlayStation 2 (PS2) Console

1 Answer

The usb for my wireless guitar hero world tour drums cant connect

(for ps2) I tried doing the way the instructions manual but it didnt work. The drums won't connect, it just flashes (drum controller & usb) and turns off! what do i do????????? Please help! Thanks!

Posted by on

  • 7 more comments 
  • Anonymous Jan 25, 2009

    the lights keep flashing on my drums and usb. they wont connect at all.

    please help

  • Anonymous Jan 27, 2009

    This is bs, Im having the same issue, Im selling this sending this **** back..

  • Venumsinai Jan 30, 2009

    I have the same problem. I used my drums for a month, but now all the red lights blinks and it doesn't work anymore... I'm so sad...

  • Anonymous Feb 21, 2009

    i tried everything to connect the drums but it just wont work.it just keeps blinking

  • jc_weirdo Feb 23, 2009

    my drumset and usb for the drumset guitar hero world tour wont connect to the game.what can i do?

  • Anonymous Feb 25, 2009

    same

  • Anonymous Feb 25, 2009

    same as everyone else's

  • shorty5150 Apr 14, 2009

    cant get my drums to connect and will they work on all guitar hero games

  • merson123321 May 17, 2009

    when i try 2 connect my drum set 2 the ps3 the usb and drumkit just flashes then turns off after 30 secs, the other controllers connect like the guitar and all but the drumkits the only thing that cant connect.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem, all i needed to do was change the batteries in the drum kit

Posted on May 22, 2009

4 Suggested Answers

  • 1 Answer

SOURCE: guitar hero world tour faulty drums ps2

Take it back to where you bought it and get your money back!

Posted on Jan 07, 2009

  • 118 Answers

SOURCE: Ps2 wont play guitar hero world tour drums

You can't play anything from PS3 on PS2.

Posted on Jan 30, 2009

  • 13 Answers

SOURCE: PS2 wireless drum set for Guitar Hero World Tour

Just plug the Guitar Hero drums wireless adapter into the usb port.Then press the power button on the drums to switch them on ,then hold down the button on the adapter and press the power button on the drums again .They should connect ,if not it may be the version of your playstation doesnt work with the Guitar Hero World Tour disk.

Posted on Aug 24, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cheat codes for sims 3 xbox 360


Why not consider precaution when you still can other than offer with an issue, which you could have averted in the first place. Wireless Mouse AmanStino ML11 2 4G Cordless Mouse with USB Nano Receiver...

Jan 09, 2017 | Sims Video Game Consoles & Games

1 Answer

I'm losing my connection...


It sounds like you've refused an Xbox Live Update at some point.
You can go into your system options and see if there's an update available.
To check for an update on the Xbox 360 you basically force a new Xbox Live connection:
  1. Press the Guide button (center logo button), bringing up the pop-up menu
  2. Go to Settings
  3. Select System Settings
  4. Select Network Settings
  5. Select Wired Network or the name of your wireless network if you're on wifi
  6. Select Test Xbox Live Connection
  7. Select Yes if prompted to update. If you're not prompted and the test completes successfully, you have the most recent update.
If that doesn't work try this link http://www.gamefaqs.com/boards/927749-xbox-360/67807343

Jan 08, 2017 | The Video Game Consoles & Games

1 Answer

What's happen to my ps 3? have error d5027


That error basically means your network connection to the PS3 network servers is unstable. Given the time of year and the number of kids that have snow days and are at home, and parents staying home working across the internet, the most likely cause is simple network congestion. You should notice this issue go away early morning when fewer people are online, and get worse as the day progresses. In some cases, you can set up a VPN or Virtual Private Network connection that can help. If you want to try that, go to this link http://community.us.playstation.com/t5/PlayStation-Home-Support/Using-Virtual-Private-Network-VPN-To-Defeat-Network-Error-D50027/td-p/44868077 for instructions on setting it up.

Jan 08, 2015 | Video Game Consoles & Games

3 Answers

What is this please help please


Have you read the last line of that message. Perhaps that would be a good place to start

Jul 16, 2014 | Nintendo Video Game Consoles & Games

1 Answer

How do i get lots of gold in celtic heroes?


Google how to jail break your iPod and then download a free in app purchase app from cydia

May 23, 2014 | Video Game Consoles & Games

6 Answers

How do i turn on my ps3 rock candy wireless controller


After installing batteries in the controller and inserting the usb stick into your PS3, hold down the home button (the round middle most button with a house on it) for a few seconds until the light on the controller illuminates. This is your indicator your controller is paired with your PS3 and should be assignable and usable at this point.

Apr 08, 2013 | Video Game Consoles & Games

1 Answer

Not turning on


It might be time to upgrade to a ps3 buddy. Otherwise.... buy a new ps2 or find a way to weld it back on. I really dont know what else to do. Sorry.

Feb 27, 2013 | Video Game Consoles & Games

2 Answers

I want cheats of fifa 10 in ps2


Sorry, there are no cheats for FIFA 10.

Mar 29, 2010 | Sony PlayStation 2 (PS2) Console

1 Answer

My PS2 Spiderman 3 The game is stuck when at doing top daily bugle building mission help me please


Turn the disc over and check for scratches, any little scratch can ruin a disc like that.

Sep 03, 2008 | Video Game Consoles & Games

10 Answers

PS3 cant go online with Belkin N1 wireless router


I have exactly the same issue as some of you above. As soon as I start my PS3 I manage to log onto the network for anywhere between 2 seconds and 2 minutes before I get the dreaded 80710102 error and have to reboot the PS3 to reconnect. I wrote to Belkin tech support and got the following reply... I Haven't tried it yet so don't know if it really works but thought I'd post it up here in case it helps anyone else out...

Hi Antony,

Thank you for contacting Belkin Technical Support.

We understand that the router does not support PS3. We apologize for the inconvenience caused.

A) To isolate the problem, please follow the steps given below to update the firmware and configure the router:

We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.

Please download only the relevant firmware on the router from the link given below. The firmware file would be according to the router version:

http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8635uk4A&aid=14489&scid=0

and save it to the computer.

- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.

Please follow the steps given below for configuring the router:

- Disconnect the computer from your Modem provided by your "Internet Service Provider" (ISP) if it is connected to the computer.

- Reset the router to "Factory Defaults". The reset button is found at the back of the router. The reset procedure is,

- Unplug the power cable and then plug it back again. Wait for 5 seconds.
- Locate the reset button (inside a hole) at the back of the router.
- Hold down the reset button till the power-light turns solid, and then release it.

- Connect the router to either the telephone line or the filter.

- Connect the computer to port number 1 of the router.

- Make sure the corresponding lights are lit. The telephone light should be ON and solid.

- Make sure your computer has a valid IP address by following the steps given below.

1. Click on “Start” -> “Run” -> and type “CMD” and click “OK”.
2. Type “ipconfig” in the black window and check the IP address.
3. It should be in the range of 192.168.2.x, where “x” ranges from 2 to 254.

- If it is not a valid IP Address, please assign a static IP address, "Subnet Mask", “Default Gateway" and "DNS Addresses" in the computer by referring to the link below.

http://web.belkin.com/support/kb/kb.asp?a=2824

- Please reset the Internet Explorer browser settings by following the steps below.

- Open Internet Explorer. Click on “Tools” -> “Internet Options”.
- Under the General tab, click on “Delete Files” under “Temporary
Internet Files” and select "Delete all Offline content" box.
- Click on “Clear History”.
- Under the Connections tab, select “Never Dial a Connection” and
click on “LAN settings”. Uncheck all the options and click on “OK”.
- Under the Advanced tab, click on “Restore Defaults”.
- Click on “Apply” and then “OK”.

- Log on to router setup page by typing “192.168.2.1” in the address bar of the browser. By default the password is blank.

- On the left under “Internet WAN”, click on the option "Connection Type".

- Select “PPPOA”, (If it is ADSL)/ PPPOE (If it is DSL) and click on “next”.

- Type in the user-name and password and then re-type the password given to you by your ISP. Make sure you type in the full user-name.
For Example, the format for the User-name should be "yourusername@yourISP.com or .net"

- Also confirm the settings of “VPI/VCI”, “Encapsulation” values from your Internet Service Provider (ISP) and configure the same.

- Change the “MTU” to “1400”.

- Click on “Apply Changes” button at the bottom. Wait till it saves the data.

- Click on Home on the right top corner and then click on the "Connect" button. You should be able to go online.

B) Configuration of PS3:

Please contact Sony and assign static IP address and DNS on the PS3. The static IP address should be assigned in the range of the router. For example: 192.168.2.200. The IP address you assign should not be used by any other device on the network. Please confirm the ports to be opened for the PS3 from Sony.

1) Please follow the instructions given below to forward the port numbers for PS3 on the router:

- Please open the Internet Explorer and in the address bar type in "192.168.2.1" and "Enter". The computer should be connected to the router with an ethernet cable.
- Leave the password blank and click on "submit".
- Click on "Virtual server" under the "Firewall".
- Enter the port number under "Inbound port" & "Private port".
- Enter the Static IP address of the PS3 under the "Private IP address".
- Check the "Enable" box and click on "Apply changes".

2) Please follow the instructions given below to enable UpnP on the router:

- Log on to the router web interface at http://192.168.2.1
- By default, the password is blank.
- Click on System setting under "Utilities".
- Against the heading "UPNP Enabling", choose "Enable".
- Click on "Apply changes".

Note: The NAT feature on the router is enabled by default.

If the problem persists, please get back to us with the following information:

1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or Static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”. Please confirm if the router is F5D8635?
4. Using the router, if the connection is stable on all the wired and wireless computers?
5. If the PS3 works fine with other networks?
6. When does the error come up? If it comes up for both, CAT5 and CAT6 cables?

Dec 06, 2007 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Sony PlayStation 2 (PS2) Console Logo

2,934 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Iron
Iron

Level 3 Expert

3018 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

shaun taylor

Level 3 Expert

1250 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...