Question about PC Desktops

1 Answer

Error ''DLL C:\WINDOWS\system32\jemobibe.dll is not a valid Window

I'm receiving an error''DLL C:WINDOWSsystem32jemobibe.dll is not a valid Window Image. Please check this against your installation disk'' I can't open any programs, including system restore. the only thing that is opening is the internet, and my spysweeper program is still open. Is my only option to use my Cyberpower recovery disk? If so how do I do it? just put the disk in when the computer is on? I bought my computer in April 06.

Posted by on

  • michaelsnyde Jan 25, 2009

    I'm new at this, how do I figure out which file I'm missing? Also I have Webroot's Spysweeper, is their virus program good? I have Macfee free through Comcast now, and I'm getting the feeling that isn't getting the job done.

  • michaelsnyde Jan 26, 2009

    I eventually was able to get system restore to open up, and restored the system back to a date before the DLL error. That issue is gone, I also added Norton 360 to my computer, no signs of viruses, i think the macfee scan online service was just B.S. about the virus, because when I got all my programs working, I scanned with Macfee and, then with norton after I ainstalled it, nothing. Thanks for your help. Have a good day.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 112 Answers

You computer is virus and trojan horse affected, use latest antivirus. you can find the .dll file to this website..http://www.dll-files.com/dllindex/index-s.shtml

download the missing file

Posted on Jan 25, 2009

  • ehsan amin
    ehsan amin Jan 26, 2009

    un install the spysweeper. install a good antivirus with last update.

  • ehsan amin
    ehsan amin Jan 26, 2009

    thank you and vote for me.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair missing wininet.dll?


If you see an error related to the wininet.dll file being deleted or missing, copy this file from the c:\windows\system32 directory of a working Win XP Pro
or Win Vista computer onto a flashdrive, then use the following procedure to copy it onto the failing system.

  1. At the boot screen (the first thing to appear at power-up), hit the F8 function key.
  2. Select 'Safe Mode with Command Prompt' and continue.
  3. In the command prompt window, type the letter of your flash drive, either d: or e: until the drive appears as e:> in the prompt window.
  4. Type 'dir' to see the wininet.dll file on that flashdrive.
  5. Once you see that file, type 'copy wininet.dll c:\windows\system32'.
  6. Unplug the flashdrive and reboot the failing PC.
Once you succeed in reviving the failed computer, go to c:\windows\system32 and right click on the wininet.dll file then copy and paste it to a save name (recommended name: wininet-copy.dll). This allows direct copy of that file back into wininet.dll if the problem reoccurs.

If you suspect an anitvirus engine or some other application deleted this file - and if it occurs again, make note of what was being performed, immediately before the failure mode. This will lead you to the offending program needing attention.

Good luck, hope this helps.

Aug 07, 2010 | IBM NetVista PC Desktop

Tip

Add Remove Programs list is blank -- Windows 2000


Usually It happens due to some virus activity or any corruption in system files. So when you go to Add Remove Programmes, It shows nothing but a blank space.

· To resolve this issue with Internet Explorer 6.0 installed, repair Internet Explorer 6.0:
Click Start, and then click Run.
Paste the following command in the Open box, and then click OK:
rundll32 setupwbv.dll,IE6Maintenance "C:\Program Files\Internet Explorer\Setup\SETUP.EXE" /g "C:\WINDOWS\IE Uninstall Log.Txt"
Because this command is case sensitive, you should copy the command, and then paste the command in the Open box.
· To resolve this issue with Internet Explorer 5.0 or 5.5 installed, repair Internet Explorer 5.0 or 5.5:
Click Start, and then click Run.
Paste the following command in the Open box, and then click OK:
rundll32 setupwbv.dll,IE5Maintenance "C:\Program Files\Internet Explorer\Setup\SETUP.EXE" /g "C:\WINDOWS\IE Uninstall Log.Txt"
Because this command is case sensitive, you should copy the command, and then paste the command in the Open box.

If the Add/Remove Programs tool still does not function properly, shows no content, or if you want to try to fix this issue without upgrading to later versions of Internet Explorer, check the following registry keys to make sure that they contain entries:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\App Management\ARPCache
Note If the previous registry keys are blank, the Add/Remove Programs tool may also be blank.

Use the command line REGSVR32 [path\filename] to register each of the following files:

%systemroot%\System32\Appwiz.cpl
%systemroot%\System32\Mshtml.dll
%systemroot%\System32\Jscript.dll
%systemroot%\System32\Msi.dll
Program Files\Common Files\System\Ole DB\Oledb32.dll
Program Files\Common Files\System\Ado\Msado15.dll
%systemroot%\System32\Msdart32.dll [not registerable]
%systemroot%\System32\Mshtmled.dll
%systemroot%\System32\Mswstr10.dll [not registerable]


If the Add/Remove Programs tool displays incomplete information or is blank, verify the file dates. Where possible, register the following files:

%systemroot%\System32\Gdi32.dll [not registerable]
%systemroot%\System32\User32.dll [not registerable]
%systemroot%\System32\Msvcrt.dll [not registerable]
%systemroot%\System32\Ole32.dll
%systemroot%\System32\Shlwapi.dll [not registerable]
%systemroot%\System32\Imm32.dll [not registerable]
%systemroot%\System32\Indicdll.dll [not registerable]
%systemroot%\System32\Urlmon.dll
%systemroot%\System32\Version.dll [not registerable]
%systemroot%\System32\Lz32.dll [not registerable]
%systemroot%\System32\Comctl32.dll [not registerable]
%systemroot%\System32\Clbcatq.dll
%systemroot%\System32\Oleaut32.dll
%systemroot%\System32\Mlang.dll
%systemroot%\System32\Shell32.dll
%systemroot%\System32\Shdoclc.dll [not registerable]
%systemroot%\System32\NetapI32.dll [not registerable]
%systemroot%\System32\Secur32.dll [not registerable]
%systemroot%\System32\Netrap.dll [not registerable]
%systemroot%\System32\Samlib.dll [not registerable]
%systemroot%\System32\Ws2_32.dll [not registerable]
%systemroot%\System32\Ws2help.dll [not registerable]
%systemroot%\System32\Wldap32.dll [not registerable]
%systemroot%\System32\Dnsapi.dll [not registerable]
%systemroot%\System32\Wsock32.dll [not registerable]
%systemroot%\System32\Plugin.ocx
%systemroot%\System32\Wininet.dll [not registerable]
%systemroot%\System32\Crypt32.dll [not registerable]
%systemroot%\System32\Msasn1.dll [not registerable]
%systemroot%\System32\Msls31.dll [not registerable]
%systemroot%\System32\Imgutil.dll
%systemroot%\System32\Cscui.dll
%systemroot%\System32\Cscdll.dll [not registerable]


Now Restart your system.. and Voila !!
Your problem is gone..

on Jan 24, 2010 | PC Desktops

1 Answer

STOP C0000221 erro de hardware desconhecido systemroot system32 ntdll.dll


You may receive one of the following stop error messages while working on your Windows XP computer.
STOP: C0000221 unknown hard error
Path\File_nameSTOP: 0xC0000221 unknown hard error
C:\Winnt\System32\Ntdll.dll (or another specific file or driver)
STOP: 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
Path\File_name
Note: The error message may be discussed in many different formats-blue screen or message box. It depends on when the corrupt file was detected.
Similarly, you may receive the following STOP messages when a critical system file fails to load on your Windows NT and Windows 2000 computer.
STOP: C0000221 unknown hard error
<path>\<file_name>STOP: 0xC0000221 unknown hard error
c:\winnt\system32\ntdll.dll
Note: Some other drive may also be given in the message.
On Windows 2000 the following error message may display:
STOP: 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
<path>\<file_name>
You usually face this problem when an incorrect driver for one or more hardware is installed on your system. For instance, the error messages described above are displayed when you install a millions of instructions per second (MIPS) driver on a x86 system.
Cause of the Error
This error occurs if the file given in the error message is damaged.
Your Windows XP operating system checks the following files for integrity during system startup:
  • All driver files, excluding the files that loaded using the system loader to start your system .
  • All DLL (Dynamic Link Libraries) on the system. These include, Graphics Driver Interface (GDI), User, Ntdll, Crtdll, Shell, Kernel and several other DLL files on the system.
  • On Windows NT and 2000 computers, all DLLs loaded in the Window server address space are also checked.
The problem may also occur if an Iomega Zip drive is connected to the same cable as your hard disk drive.
Resolution Method
You can resolve this issue by removing the corrupt driver from your computer and then reinstalling a fresh and healthy copy of the driver. You may need to use the Device Manager utility to remove the driver. It is recommended that you clean your registry with the help of a reliable tool, such as RegGenie to ensure that all entries related to the uninstalled driver are removed from the system. After you have completely removed the corrupt driver, restart your system and install a fresh copy of the driver on the system.
If this step does not resolve the problem, you may have to reinstall Windows XP.
It is recommended that you regularly clean your registry with the help of a registry cleaner tool and perform antivirus and antispyware scan using tools, such as Antivirus Plus and StopZilla to prevent such errors from occurring on your system.

GOOD LUCK :-)

Feb 03, 2010 | Intel PC Desktops

1 Answer

Sprtcmd.exe-bad image Application DLLC:\WINDOWS\system 32\NTMARTA.DLL not a valid image. Check this against your installation diskette


You may be able to perform a restore, From the start menu chose programs>accessories>systemtools>System Restore
Choose a restore point that you think has a best date and time when your pc was working better.

Apr 16, 2009 | Dell Dimension 8250 PC Desktop

2 Answers

Ddl error message... bad image


Hi there.

You might get this if the file mcenspc.dll is leftout while uninstalling some program or when attempted to elimitate spyware or malware through spyware scan.

This has proved not to be a threat and it is safe to remove from the Computer. To do this :

1. Click Start -> Run -> Type System32 -> Ok
2. Look for mcenspc.dll
3. Right Click on the file and click Delete
4. Reboot the computer


Everything should be fine now

Apr 11, 2009 | PC Desktops

1 Answer

Errormessage keeps coming up Application has failed to start because msjter35.dll was not found reinstalling the application may fix this problem


After you download "*.Dll"(file extension dll) on your machine, copy it to
windows/system32/
Go to "start" ==> "run" and type "regsvr32 *.dll" to register the file to the system. For windows 95/98/xp/2000/vista,and win vista,no dlls is corrup!

where should this file go?
Please copy it to windows/system32/

We offer Free System Scan for Dll errors, ocx errors,and thousands of other frustrating Windows errors.Speed up your computer.
http://www.dll-download-system.com/dlls-download-m-/msjter35.dll.html


you will find the link and you can download this file

Dec 02, 2008 | HP PC Desktops

1 Answer

Windows has encountered a problem & needs to close nag ?


  1. Quit Microsoft Internet Explorer.
  2. Click Start, and then click Search.
  3. Click All Files and Folders.
  4. In the All or part of the file name box, type Shell64.dll, change the Look in box to your hard disk, and then click Search.
  5. If you locate the Shell64.dll file, note its location of the file.

    By default, its location is C:\Windows\System32, but its location may be different on your computer. Do not close the Search Results window.
  6. Click Start, and then click Run.
  7. In the Open box, type Regsvr32 /u, followed by the location of the Shell64.dll file you found in step 5, and then click OK.

    For example, type: Regsvr32 /u "C:\Windows\System32\Shell64.dll"
  8. When you are prompted to acknowledge that the program succeeded, click OK.
  9. Switch to the Search Results window.
  10. Right-click the Shell64.dll file, and then click Rename.
  11. Type a file name, and then press ENTER.

    For example, type: Shell64.old.
  12. Close the Search Results window.

Nov 30, 2008 | PC Desktops

1 Answer

Dll user32.dll problem


Certain programs may not start after you install security update 925902 (MS07-017) and security update 928843 (MS07-008) on a computer that is running Microsoft Windows XP with Service Pack 2 (SP2). Additionally, you may receive an error message that resembles the following: application_executable_name - Illegal System DLL Relocation

The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.

Nov 21, 2008 | Dell Dimension 2400 PC Desktop

1 Answer

Dell dimension5150 won't startup


The solution is to restore the GDI32.dll from the service pack into Windows system folder with the following steps:
  1. Boot from your Windows CD
  2. At Welcome to Setup screen, press “R” to start repair option and open up a Recovery Console’s command prompt window.
  3. Select the Windows installation to use, normally is C:\Windows and just one option. If so, press “1′ and hit Enter.
  4. If prompted for administrator password, enter the password (normally blank) and hit Enter.
  5. Make a backup of existing GDI32.dll in system folder with following command: REN C:\Windows\System32\GDI32.dll C:\Windows\System32\GDI32.dll.orig (take note of spaces)

  6. Replace “C” of the drive letter of your Windows installation drive if necessary.
  7. Then copy backup GDI32.dll from c:\windows\servicepackfiles\i386\gdi32.dll to the system folder with the following commands: copy C:\Windows\ServicePackFiles\i386\GDI32.dll C:\Windows\System32\GDI32.dll (take note of spaces)
  8. Restart computer.
This should Fix the problem.

Oct 08, 2008 | Dell Dimension 5150 (DIM515MIN) PC Desktop

1 Answer

Uhm, i just downloaded the adobe photoshop program and it says setup has encountered an error and cannot continue please contact adobe coustomer support for assistance. internal error 2739. so can you...


Hi-

Try this

Open a command prompt, navigate to C:\Windows\system32 and type in regsvr32 jscript.dll and press ENTER

c:\windows\system32\ type regsvr32 ***remember to put one space and then type*** jscript.dll ,,

c:\windows\system32\regsvr32 jscript.dll (( like this or it will not work))


If all fails call Adobe Installation Support number: 800-642-3623.

Thanks for using fixya, pls rate solution if it helps.

Jul 24, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...