Question about Maytag 24 in. MDBH950AWS Built-in Dishwasher

Open Question

Maytag dishwasher model MDB5601AWS replaced handle because lock was broke and now it will not start

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 70 Answers

SOURCE: Maytag Quiet Series 300 Dishwasher not working (Model MDB5601AWS)

in such cases it is always the control panel(touch panel) that needs to be replaced.it is very simple 2 chg and u could save lot of money.to chge cntrl panel ,open the door and remove all the screws around the white plastic part of door.then pull apart the inner part from outside part.the cntrol panel is held to outer panel with 4 screws.b4 that remove 2 screws holding the control board to panel.do not forget 2 unplug the unit from power b4 doing anything.

Posted on Aug 22, 2009

  • 110 Answers

SOURCE: Maytag Dishwasher Model No. MDB8601AWS Plastic

Source for 144 different parts for your dishwasher:
http://www.searspartsdirect.com/partsdirect/part-model/Maytag-Parts/Dishwasher-Parts/Model-MDB8601AWS10/3048/0130000?searchedModel=mdb8601aws&blt=

Posted on May 17, 2011

  • 1 Answer

SOURCE: have a maytag dishwasher MDB6600 AWQ -latch/handle

Just did this myself .Need the right star screw driver to remove 11 screws holding the door inner liner
then you can access the handle latch assembly. You pull off the 2 wire connectors to the switchs that are part of the assembly. Slip connectors onto new assembly.Position the handle part thru the door and re attach inner liner. 2 of the inner liner top screws also hold the assembly in place.Unfortunely , this didn't solve my problem of the dishwasher not turning on.

Posted on Aug 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Control panel not working. Where is thermal fuse located?


Go to www.repairclinic.com and enter MDB5601AWS. You may get a clue as to where to find it. You also will get an illustrated list of common replacement parts which will aid further identification.

Feb 09, 2016 | Maytag 24 in. MDB5601AWS Stainless Steel...

1 Answer

My dishwasher (Maytag MDBH965AWQ quiet series 300 was purchased in May 2006 (making it just a little over 4 years old). The handle broke on it initially and now the control panel has gone out including...


Well Kathy, you may be in luck. There has been a safety recall on your model of dishwasher and Maytag will give you a considerable allowance to replace with another Maytag. You may contact them at 1-800-544-5513 with your model and serial number and they will give you instructions on how to obtain your new dishwasher at a deeply discounted rate and all the details.

Sep 11, 2010 | Maytag Dishwashers

1 Answer

The handle to open the door broke...can you replace the door?


notify maytag or any appliance parts/repair store or online most online parts stores have exploded views of part replacement u will only need to replace the broken handle not the whole door

Jan 19, 2010 | Maytag 24 in. MDB7650AWS Built-in...

1 Answer

Maytag Quiet Series 300 Dishwasher not working (Model MDB5601AWS)


in such cases it is always the control panel(touch panel) that needs to be replaced.it is very simple 2 chg and u could save lot of money.to chge cntrl panel ,open the door and remove all the screws around the white plastic part of door.then pull apart the inner part from outside part.the cntrol panel is held to outer panel with 4 screws.b4 that remove 2 screws holding the control board to panel.do not forget 2 unplug the unit from power b4 doing anything.

Aug 21, 2009 | Maytag 24 in. MDB5601AWS Stainless Steel...

1 Answer

Dishwasher will not start


push and hold that button in for 3 - 5 seconds i believe the control was locked. let me know if you need further assistance or if this solves the problem

Nov 30, 2008 | Maytag 24 in. MDB5601AWS Stainless Steel...

2 Answers

Maytag quiet series 300 model mdb5601aws making noise


sounds like the macerator is bent out of shape from something going through the pump. Get a impeller kit and replace all the parts and you should lose the grinding noise. I can look up the part number if you want

Nov 25, 2008 | Maytag 24 in. MDB5601AWS Stainless Steel...

1 Answer

Won't fill with water


Sounds like you float switch may not be enguaging

Jun 07, 2008 | Maytag 24 in. MDB5601AWS Stainless Steel...

1 Answer

Maytag dishwasher MDB5601AWS won't turn on


ok under the bottom kick-plate you will find a tech sheet first id start with where my power comes in under the kick plate second remove the front panel and check the door switches third check the control for a fuse or burned wires resistors etc refer to the tech sheet but it sounds to me like a power problem

Jan 25, 2008 | Dishwashers

Not finding what you are looking for?
Maytag 24 in. MDBH950AWS Built-in Dishwasher Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...