Question about Pool & Spa

Open Question

I have an error code on my eco-35 drolet pellet stove that reads h2 how do I fix this?

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

protek480
  • 1714 Answers

SOURCE: purchased a used earth stove mp240 pellet stove

The auger motor is fed through a high temp. limit thermostat. It has a manual reset on the back of it that you have to press on firmly to reset it. Open the side panel on the stove and find the wiring. You will see the thermostat on the back side of the combustion chamber. Look very closely and reset it.
good luck!

Posted on Jul 01, 2009

  • 1 Answer

SOURCE: I lost my owners manual for my drolet eco 45

go to:

http://www.drolet.ca/downloads.aspx?CategoId=5&Type=manuel

hope this will help!!!

Posted on Oct 09, 2009

blueextc3221
  • 15935 Answers

SOURCE: Pellet stove flashing H2 and won't reset

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Traditions the earth stove. how to operate


Try these people who seem to be main dealers.

http://woodheatstoves.com/stove-manuals-earth-stove-user-manuals-c-291_217.html

Nov 03, 2015 | Us Stove Company USSC Eco-Aire Window...

2 Answers

What is a 5 u code on a pellet stove


New Stove Auger not moving shows S U in display ' Hearth.com ...

www.hearth.com > ... > The Pellet Mill - Pellet and Multifuel Stoves
Nov 25, 2010 - 25 posts - ‎6 authors The letters "S U" mean the stove is in "Start Up mode. ... At this point load the stove w/pellets and hit the start button again. ... Shows SU again and settings are at 5 and 5. still no auger movement, not even the slightest bit. ... The E-0 code is the no error errorcode and stove will enter normal operation which ...

Oct 03, 2015 | Pool & Spa

1 Answer

My stove keeps going out on E2 and shuts down why


The E-2 Error code indicates an automatic shutdown because the stove does not detect a fire. Check out Englander's troubleshooting guide to some of the causes.

http://www.heatredefined.com/faq/troubleshooting-guide/pellet-stove/evolution-pellet-stove/evolution-pellet-troubleshooting-guide/e-codes/e-2-failure-to-start

Feb 27, 2015 | Englander Direct Vent: 2,000 sq.ft. Pellet...

1 Answer

Why is my pellet stove blowing fuse when plugged in


There can be several reasons. It would help me to know what make and model, but heres a start.....1} Make sure your using the correct fuse.2} Look for any debris or items which have entered the unit that could be shorting out the circuit. Also look for loose connections or wire spades that have come loose and shorted 3} Next see if the combustion and convection blower is turning freely. They should spin with ease. If in doubt, make a test cord from an old extension cord and try the blower directly by DISCONECTING it from the stove wiring and hooking the test cord to it then plug into a power strip carefully.4} Check the auger... Can you wiggle it around with your hand? If so then use the test cord in the same fashion as the blower. Augers tend to jam up and that can blow the fuse depending on the make of stove. 5} Look at the igniter and wire to assure that it is in visibly good condition. These are some good places to start. If none of these are help, it may be worth while to call a repair tech or manufacture help line. Be prepared for a long hold if you call during peak winter season. Good luck.

Jun 14, 2014 | Drolet ECO-45 High Efficiency EPA Pellet...

1 Answer

Stove is shaking


I would suggest going to this website http://www.drolet.ca/en/installer-locator and you can find someone from Drolet who is authorized to diagnose your issue. If you can't find someone close by on the Drolet website then look for chimney sweeps through Angie's List preferably and they can help diagnose and determine the problem. First stop always default to an AUTHORIZED SERVICING DROLET service techinichian. Especially with pellet stoves, depending on the technology, these can be extremely technical with the exhaust and combustion blowers being off balance and causing the stove to shake. Without someone there to look at it and diagnose it hands on it is equivalent to when your car has a check engine light and you don't take it to a mechanic. Pellet stoves can be extremely tricky to work on. Good luck and try the manufacturer first.
Find an installer near you Drolet

Jan 11, 2014 | Drolet ECO-45 High Efficiency EPA Pellet...

1 Answer

How to clear error code on ussc stove pellet 5500m


im working on a pellet stove model 6039 hf when stove is on the draft fans light stays on i cleaned very good what next

Jan 12, 2011 | Heating & Cooling

1 Answer

Pellet stove flashing H2 and won't reset


Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Jan 16, 2009 | Stoves Broan 40000 Series Hood - 36" Hood...

2 Answers

Pellet stove


PRESS H THEN TROUBLE THEN START THEN HIGH 6 THEN LOW 1
THEN PRESS BLOWER & HIGH FOR 3 BEEPS

Sep 30, 2007 | Stoves Broan 40000 Series Hood - 36" Hood...

Not finding what you are looking for?
Pool & Spa Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Bill Jordan

Level 2 Expert

372 Answers

David Spradling
David Spradling

Level 3 Expert

3543 Answers

Are you a Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...