How do I stop the cash register from printing? We were trying to program the departments, and I hit the ''A'' key then the ''DLU-SUB'' button and it started spitting out a neverending receipt. How do we
1) stop it 2) reset all departments 3) PROGRAM the departments properly.
I don't have this particular cash register, But I took a look at the manual and I recommend the following:
A. Turn the cash register off.
B. Unplug it.
C. Remove the batteries.
D. Wait at least five minutes.
E. Initialize the cash register. This procedure was copied from thwe manual:
In order to operate the cash register properly, you must initialize it before operating for the first time. Follow this
1. Insert the manager (MA) key into the mode switch and turn it to the REG position.
2. Insert the plug of the AC power cord into the AC outlet. The buzzer will sound
IMPORTANT: This operation must be performed without batteries installed.
3. The cash register has now been initialized. The register display will show
"0.00" and then “NO BATTERY”.
If the buzzer does not sound when the plug is inserted, the initialization has not been done successfully. (This will occur when the voltage is high because you operated the cash register
before starting initialization.) Wait at least one minute after pulling out the plug and insert the plug again.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Experience: 13+ Years of Hardware Troubleshooting and System Design ... I have bought a sam4s cash register and I can't get it to do anything but beep E at me. ..... I tried to open the scanner function on my Pixma MG3520 and 10/24/2015 ...
Aug 31, 2010 - Uploaded by cashregistergroup
How does one get to change the decimal places on a ER-180 to suit one's operational needs? I don't seem to get it from the manual ...
SETUP DATE & TIME
1. Turn C key to Program Mode.
2.PRESS "1300" - "SUB TOTAL"
3. H - H - M - M - X/TIME (H: 2 digits of hour, M: 2 digits for minute)
4. M - M - D - D - Y - Y - X/TIME (2 digits for Month, Day and Year)
5. PRESS "CASH"
Perform a status clear.
turn key to blind(must be S key not mgr key) while holding zero key down turn reg on with power switch on right side.
reg will beep once & print reciept saying status clear.
this wil not clear programs or totals.
That's a programming option -- whether you have to sign in for each sale, or can just keep going until you do a Cashier Z reading. But this on is not in your Owner Manual. Most Sharpregisters have a deeper level of programming, called SRV mode. It's not marked on your mode switch, but it's one click past PGM. You need a SRV key to access it and a Service Manual to know what's there. Sharp doesn't supply the SRV key or instructions, because it allows you to change Grand Totals and other things that would allow an employee to steal without detection.
Any servicing Sharp register dealer should have the SRV key, and this change is simple enough that they might do it for free if you bring the register to them along with these instructions and ask nicely.
Turn to SRV mode. 910 . @/FOR CA/AT Turn to REG mode.
Sign in and try running consecutive sales or No Sales without signing in between them.
You can still change Cashier numbers between sales by signing in with a different number. If you touch the CASH # button without putting a number in first, it will sing out you current cashier, and you'll need to sign someone in again. If you are in X/Z mode, and you touch the CASH # button, it will print a Cashier Z reading and automatically sign out all cashiers. Sign in before your next sale.
Try this, for example june 30 2004 = Put the mode key in PRG position In round number keys press 063002 then press #/ST/NS key If that works to set the time in round number keys press 1100 then press Qty/Date or 1305 for one 05 pm. I have a 587 cx and can't fiqure out how to print my reports X Z