Question about Washing Machines

Open Question

Whirlpool Imperial seventy washer leaks - Washing Machines

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
docjohn174
  • 943 Answers

SOURCE: replacing spin belt whirlpool clothes washer

hi thanks for the question this problem can be a lid switch also if the lid switch is bad , it wont send powerdown to the wig wag solenoid . the spin solenoid is mounted on top of transmission , when plunger on solenoid is activated it drops the clutch and spins , if the solenoid is bad then it wont activate the solenoid , to test to see if you have a bad solenoid disconnect power , on the solenoid you see 4 wires just the red on the left and yellow on right reverse these 2 wires plug in washer . select spin .activate washer if the washer starts to wash on spin the solenoid is ok then i would change the lid switch thanks fr the question THE APPLIANCE DOC

Posted on Sep 11, 2008

Ad
jmgldsmth
  • 1869 Answers

SOURCE: leaking tub on whirlpool washer

replace the main (under tub) seal

Posted on May 04, 2009

localwonder
  • 6784 Answers

SOURCE: Whirlpool Imperial Washer LA9200XWN1 Does not agitate like it did

HI, this will happen over a long period of operation time. This is repairable and, you will need to purchase an agitator kit from whirlpool or, an aftermarket circuit. installing a new agitator kit will fix this issue.

one or more of the main agitator components have become stripped or, damaged.

Posted on Jul 09, 2009

  • 10865 Answers

SOURCE: i have a whirlpool ultimate care heavy duty super

Hello mcc... It is possible with temperatures that low to have a water filled component freeze and crack. In order to determine if that is the case, go to searspartsdirect.com and enter your model number.

This will provide you with free schematics of all of the components of your machine. This way you will know what you are looking at when you pull the machine out from the wall, and inspect it. Joe

Thanks for choosing Fixya!

Posted on Jan 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whirlpool imperial seventy won't start


Unplug unbit, remove screws in console and lift panel. remove connector from push to start switch anc check continuity.

Feb 16, 2013 | Whirlpool Dryers

1 Answer

Whirlpool Imperial seventy dryer does not heat up


If there is a copper line feeding gas to it, PULL THE DRYER WAY FROM THE WALL AND TURN THE GAS OFF AT THE VALVE IMMEDIATELY!

Natural gas and copper do not mix, and the copper line will corrode from the inside out.

Now, on to the problem, it's very likely the timer has failed IF it does not rotate all the way through the drying cycle. If it does, and the clothes do not heat up, then reply back what you are experiencing and I will give you move help.

Jan 24, 2009 | Dryers

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Brad Brown

Level 3 Expert

15639 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...