Question about Zenith IQC60H95W 60" Rear Projection Television

1 Answer

I have the Zenith R56W36 56 in. Rear Projection Television, and im getting a 3d affect is there a way to solve this problem? I have the zenith IQC60H95W 60" rear projection tv and have the same problem when i try to line up the red line it will not move over far enough is there a way i can fix this.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Zenith Master
  • 3,459 Answers

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs.

You can find more details and solutions here on Fixya at the following link below. Or click HERE

i have the Zenith R56W36 - 3d884ac.png

Posted on Oct 15, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Zenith R57W46 57 in. Rear Projection Television

Factory setting will not cure a convergence problem---in customer menu look for convergence and see if it will adjust---if not and looks 3d etc parts have to be replaced and set adjusted.

There are kits for this available on the internet by brand and model number.

May or may not be a do it yourself repair depending on what skills you have.


May 04, 2012 | Zenith R57W46 57" Rear Projection...

1 Answer

Zenith R56W36 Image in 3D

This needs a special remote to get to the factory alignment screen.This is the part # for the remote ---#105-201m .
You really should call a good TV Tech on this one. They are a convergence nightmare for even a good Tech.

Jul 31, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

3d effects

it will cost between $300-$700 to fix the convergence a new board was needed.... dumped the Zenith got a RCA LCD 40inch

Jun 22, 2009 | Zenith R57W46 57" Rear Projection...

1 Answer

I have the Zenith R56W36 56 in. Rear Projection Television, and im getting a 3d affect is there a way to solve this problem?

yes the convergence needs to be repaired. You can get a kit for your model which includes both convergence ICs and all the feed resistors . the kit also includes free instructions so you can do the repair yourself. Heres the link to the proper repair kit for your model.

Jan 24, 2009 | Zenith R56W36 56" Rear Projection...

1 Answer

3D affect

Projection TV sets have several common problems listed below.

Problem #1) Convergence


  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - makes a chirping sound.
Example Photo:
Problem #2 CRT Fluid has clouded over.


  • Dull Video, Washed out
  • White/Bright looking video
  • Halos around objects
  • Red/Orange looking
Example Photo:

You can see more examples and find a fix here...


Oct 21, 2008 | Zenith R57W46 57" Rear Projection...

1 Answer

Convergenc problem 3D

it would probably be cheaper to buy another tv

Aug 27, 2008 | Zenith A50M84W 50" Rear Projection...

1 Answer

My TV screen has 3D problem

you need to have someone replace the convergence IC's

Jul 27, 2008 | Zenith R57W46 57" Rear Projection...

1 Answer

Zenith r57w46

replace convergence i.c.s. and safety resistros around block

Jul 07, 2008 | Zenith R57W46 57" Rear Projection...

Not finding what you are looking for?
Zenith IQC60H95W 60" Rear Projection Television Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74990 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides