Question about Motorola Mobility Moto Q

2 Answers

Motorola flash mode

My q turned off when i had full battery and wont turn on unless it is plugged into the charger. when i get it turned on the screen is back and the message motorola flash mode bootloader version: boot_c_03.05.00r_mpap usb cable connected comes up what can i do phone is stuck in flash mode while on charger and then screen goes black any help would be appreciated

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

First try removing the battery.

If that does not work try Master Reset.
Turn phone is off, and place phone on top of a table.
Hold the center key and the power button for a minute or two, until you see the splash screen.


If still no luck, follow instructions below:


Motorola flash mode - FixYa


~help~ Flash Mode?? Phone Wont Turn On.... - Motorola Q Forum ...

Fixing the frozen Q - Motorola Q - Hello Moto Q Forums

Posted on Jan 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Change the motherboard.......
  Usually this issue occurs when cellphone might have fallen off........

    Motherboards are avialable in the market..

Thanks.

Posted on Jan 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a problem getting my phone on. i have a motorola electricify. it wont turn on even when i try to reset it hold the volume down button. it wont do a thing. it wont charge. everytime i plug the c


Kyle

let it set on the charger for a couple hours without attempting to turn it on. See if the battery icon appears.

If that doesn't work you can try MOTOROLA ELECTRIFY Master Reset Factory Data Reset

Mark
Motorola Support

Sep 14, 2014 | Motorola Mobility MB853 Electrify US...

1 Answer

My phone is not powering on when i plug the charger in it has a green light in the top right corner but its not turning on when i press and hold the button on the top left 


try taking the battery out and while holding the power button in put the battery back in, if you still get nothing on the screen try doing the same , holding the power button down while you insert the charger.

If a tri coloured screen appears you will be able to reflash it, if it doesnt appear, then your battery is dead and it wont charge no matter how much you try, the MDA(or wizard) wont charge the battery, unless windows is running, i would recommend you buy a new battery, they are cheap enough

NOTE!!!
If the battery is very low but you can get the multicoloured bootscreen, i would not advise flashing it as you have no idea of how much charge is in the battery, if the battery fails during flashing you wont have a phone anymore

Dec 29, 2009 | T-Mobile MDA

1 Answer

My motorola rokr wont turn on!


hold the camera button and then turn ON,then check if the phone goes to the flash mode ,the screen would turn completely RED

Sep 19, 2009 | Motorola Mobility ROKR E6 Smartphone

1 Answer

Moto q want trun on


Try taking the batteries out ( fully disconnecting them from the gold contact points) ... then put them back in with the charger already plugged in. It should go to that blue charge screen instead of turning on. LEAVE IT ON THAT CHARGING SCREEN for at least 5-10 mins. Now, Hold down power, screen goes black... then tap power about 2 seconds after screen goes out, and it should start up as normal. If taking the battery out has no effect, I would investigate whether that (the battery... being dead/unchargeable) is the problem. I'm hoping one of the two answers gets ya where you need to go.

OH AND YOU CANNOT USE USB CHARGER TO DO THIS. IT HAS TO HAVE DIRECT FROM-THE-SOCKET POWER TO CHARGE UP THAT FIRST BIT OF COMPLETELY TAPPED CHEMICAL (ELECTRICAL) REACTIONS.

Jul 31, 2008 | Motorola Mobility Moto Q

5 Answers

Motorola A1200 Problem


Easy step by step solution!

Hey guys had the same, Try this solution before buying a new battery/charging cable (it might not be the problem):

I did these steps after playing around with it for awhile and am at the stage where my phone turns on fully and says "Battery Charging" when plugged into the charger. It is now charging normally again... Finally! (I had the flashing moto logo too when charger plugged in) I believe this problem occurs because the battery is completely drained and is unable to turn on to charge bcuz the phone needs to be on to be charged, happened to me because i left it in a jacket pocket and forgot about it for weeks. Anyways...

1. You need a USB data cable for it, it should have come with the phone, if not than any USB data cable that fits the phone's charging slot should work (charge cable for the ps3 controller will work or maybe a cable from a digital camera with the same end)

2. Connect the phone to your computer via the USB cable and a USB port that works. Make sure it's plugged in and leave it (even if nothing happens and the screen on the phone is still blank). Although the screen is black, the phone is still charging via your computer (it's just too low on battery to produce the light on the display screen to load up your phone).

3. This might take anywhere between 15 and 45 minutes so be patient and leave it plugged in, beats buying a battery of charger with your money for something that can be solved for free.

4. At some point your computer will make the usual processing noises signalling that it is finally recognizing the phone as a usb device and shortly after your ming's screen will turn on stating that the battery is charging. Success! One of two things will happen, if you have previously installed the ming's drivers to your pc it will just recognize the phone. If you are like me and do not have the drivers installed, you may choose to do so via the cd that came with the phone or just not do it at all.

5. If you want to just charge it via the computer then congrats, your job is done, just leave it plugged in and wait until it is fully charged. If you wish to switch to your regular outlet charger please proceed to step 6.

6. At this point drivers installed or not, either safely remove device from the computer or just unplugg it. Now return your phone to your usual outlet charger making sure its connected. When plugged in you'll notice the moto logo appear (no longer flashing). After about 5 seconds that logo will disappear. At this time flip open the phone. The usual turn on sequence will play out and it will now load up with the battery charging screen similar to the screen from when it was plugged into the computer. Congratulations your phone should be back to normal now.

NOTE: This charge will take longer than your normal charging time but that's just for this time since your battery is super low it will be back to normal after that. Also if this did not work for your phone then now is the time to see if the charger/phone/battery is the problem.

So I hope this helps you out and eases your state of panic. I hope I saved you guys some money with this solution and that your mings are up and running again. I know i was pretty content when the problem was fixed. Please reply with any comments, questions or concerns you may have. Enjoy your once again working mings.

Jan 24, 2008 | Motorola Mobility MING A1200

2 Answers

Motorola Flash Mode


Can you hold down the center nav key and power up the unit? Then select Yes and perform a Master Reset on the unit. This should fix the file system possibly correcting the issue.

Is this a Q, Q9m, Q9c, or Q9h? Who is the carrier?

Dec 02, 2007 | Motorola Mobility Moto Q

1 Answer

Flash Mode


Sounds like your device is defective and needs to be replaced. Time to look for your warranty info sorry to say

Nov 25, 2007 | Motorola Mobility Moto Q

12 Answers

Motorola flash mode


Have you tried a Master Re-set when the phone is off? Hold the center key and the power button for at least a FULL minute to a minute and a half. You will see the provider's splash screen, but hang tough.

This works best with the device on a flat surface rather than holding it.

Sep 16, 2007 | Motorola Mobility Moto Q

Not finding what you are looking for?

Open Questions:

0 Answers

boot_c_03.08.00r_mpap Paul Sager from FixYa has posted a solution for this problem previousley (as below). I have tried the Motorola and Verizon sites (tried the store as well) and the software is not available to flash the phone. Do you know of a site that would still have it available? Or can this question be sent to Paul to further comment on it? All I want to do is recover the phone numbers, notes and calandar from the phone via Activesync or Windows. Paul Sager 2335 Solutions July 14, 2010 I can help you with your Motorola Moto Q. What has happened is that the firmware of your phone has become corrupted. When this happens your phone will no longer finish its boot sequence. This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware. The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech handy.) If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times. My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone. I hope that helps.

Oct 09, 2012 | Motorola Mobility Moto Q

See all Motorola Mobility Moto Q Questions

Motorola Mobility Moto Q Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Computers & Internet Experts

Motorola Mobility
Motorola Mobility

Level 3 Expert

1623 Answers

David Payne
David Payne

Level 3 Expert

13918 Answers

AJMAL KHAN

Level 2 Expert

382 Answers

Are you a Motorola Mobility Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...