Question about Computers & Internet

1 Answer

Computer not reading

Turns on, but software doesn't start

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 32,281 Answers

Computer does not boot up The problem maybe the RAM, it is faulty or just needs reseating to make proper electrical contact.
Reseat the RAM and then boot up your laptop. If it still does not boot up then remove the RAM module/s and take them to your friendly computer repair shop and get them to test the RAM for you. Just like you sometimes need a mechanic to repair your car, sometimes you do need a technician to diagnose and identify the fault or faults on your computer. Not only does a good service technican have the experience to deal with this type of problem, they also have the equipment that allows them to look at things the average computer user can't see, and he has a collection of replacement parts that can be used to quickly test individual components on your computer.

Posted on Jan 18, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Computer doesn't reboot after turning off.


You could have a power supply problem. Start up is ******* a ps until it is fully up an running. You may have bulged caps in the power so that takes awhile to full charge up. I would start there. No other reason for it to do that because it runs fine after it gets started.

Jul 21, 2017 | Computers & Internet

1 Answer

I have a casio privia px-130, and I'm trying to use it as a MIDI on FL Studio, but it won't show up in FL Studio. Is there a driver that I have to download?


Make sure you follow the steps of the procedure below exactly. Connecting incorrectly can make data
send and receive impossible.
1.
Turn off the digital piano and then start up
your computer.
• Do not start up the music software on your computer
yet

3.
Turn on the digital piano.
• If this is the first time yo
u are connecting the digital
piano to your computer, the driver software required
to send and receive data will be installed on your
computer automatically.
4.
Start up your computer's music software.
5.
Configure the music software settings to
select one of the following as the MIDI device.
CASIO USB-MIDI

Apr 19, 2013 | Casio Privia Px-130 Px130 88 Key Digital...

1 Answer

Have power but wont start


change the power box. it is the only thing that is creating problem. if that doesn't work than may there's problem with the motherboard .

Jun 08, 2012 | Encore Software Video Game Consoles &...

1 Answer

OCR doesn't work with WINDOWS 7 and my Lexmark X5650es printer


Try this approach:1. Uninstall your existing printer driver. On your computer, go to Start menu > Programs > Lexmark X5600 Series folder > Tools > Uninstall. After the uninstall process, reboot your pc when prompted.2. When your pc turns on, check if your Windows 7 is running on 32-bit or 64-bit operating system. On your computer, go to Start menu > right-click on Computer > click on Properties. Take note of the System Type.3. Use the link below to download and re-install the corresponding printer driver for your operating system:- Lexmark X5650 Printer Driver for Windows 7 32-bit- Lexmark X5650 Printer Driver for Windows 7 64-bitSimply follow the instructions on your computer screen to complete the installation.4. To re-install the Lexmark OCR scan software, insert the printer software installation CD in your pc CD-ROM drive.5. Click on Install > Install Additional Software > select the Lexmark OCR Scan Software > continue with normal installation steps.
Then try to create a PDF or Scan and Edit text (OCR) to verify that the problem is fixed.
If that doesn't help, please contact Lexmark Technical Support Center at 1-800-539-6275 for additional assistance.

Feb 13, 2012 | Lexmark X Office Equipment & Supplies

1 Answer

While taking pictures my camera all of a sudden froze and said card error, tried putting memory card on computer but it won't read it have tried using recovery programs but it freezes them please help


If your memory card is 4GB or larger, AND if your computer is two or more years old, your computer's card reader might not be able to read the newer 4GB SDHC card. In that case, just purchase an inexpensive USB card reader from WMart, or Amazon (here's an example). Try a different card reader first to see if you can directly copy and paste the pictures from the card onto your hard drive. If the new card reader doesn't see the files, then try recovery software. Here's some freeware to try. If the software still doesn't see the card with the new card reader, you may next need to try the corrupted card procedures described at the bottom of this linked article.

Nov 26, 2011 | PNY 4GB Secure Digital High Capacity...

1 Answer

I changed batteries and when I turned player back on...it only shows an image of the player and a flashing exclamation point. It won't turn on any further than that point. Thanks.;


I found this on another post:
"I had a error close to that one. It was a picture of the player with a flashing exclaimation. I couldn't do anything with the player. It was frozen. I plugged it into the computer and no results. I changed the batterys and got no results. I found the software and hooked it up to the computer again. It said there was a software update. I followed the prompts and it worked. The music player was back to normal. So those of you that have this player MAKE SURE YOU HAVE THE SOFTWARE!!!"

After reading the post, I went to www.fisher-price.com/kidtough/ re-downloaded the software and installed/launched it but didn't get any updates. So I disconnected the player but left the Fisher-Price software running in the background and started doing other stuff. When I went to shut down my computer, I was about to shut down the Fisher-Price software when I noticed the message prompt "THERE IS AN UPDATE TO THE SOFTWARE, WOULD YOU LIKE TO DOWNLOAD IT"
I was so excited to see the prompt and I hit OK. It told me to connect the player to the computer before starting so I did and it automatically did an update. It appears to be working now! Sure hope this doesn't happen again!

Jun 10, 2011 | Play Inc Fisher Price Music Play and...

1 Answer

No conecting in my pc sound


There are a number of different reasons why your computer may no longer give sound. If you have this problem, read on to learn how to diagnose the problem and resolve your PC's loss of sound.
Instructions Things You'll Need
  • Driver and Application Recovery CDs
  • Updated sound driver software

Check the Speaker Connections and Volume Control Settings
    • Verify that the lack of sound is not due to faulty speaker connections. A simple way to test it is to substitute the speaker connection with headphones and see if you get any sound.
    • Open the volume control window by clicking your "Start" button and then "All Programs." Click "Accessories," then "Entertainment," then "Volume Control." Alternatively, just click on the speaker icon that's in your System Tray.
    • Check the volume and mute settings. If any of the mute check boxes have been checked, uncheck them. If this doesn't work, read on.
    Perform a System Restore If Necessary
    • If the sound has been audible from your computer's speakers and is suddenly lost, you may need to perform a System Restore. Click on the " Start" button and then "All Programs."
    • Click on "Accessories," then "System Tools," then "System Restore."
    • Complete the System Restore Wizard. If this doesn't work, read on.
    Delete and Reinstall the Original Sound Drivers
    • Deleting and reinstalling your sound driver may resolve the problem. Your sound driver may have been corrupted or may be missing. The result of this is that the restore utility menu won't be available. For Windows XP, follow these steps.
    • Click on your "Start" button. Click on "Control Panel" and then "System." Next, click on "Hardware," then "Device Manager, then "Sound, Video and Game Controllers."
    • Click on a sound device named in the Device Manager, and then press the Delete key on the keyboard. Click "OK" in the window that appears. Remove all the listed sound devices i this way EXCEPT Audio Codec and Legacy Audio Drivers.
    • Restart your computer. Reinstall the deleted drivers using the Driver and Application Recovery CDs that came with your Windows XP system.
    • Visit your computer manufacturer's official website. Check for any updated sound driver software for your sound card. If any, download them along with the installation instructions.


I hope this information will be helpful. Thank you for using FixYa!

Jun 09, 2011 | Computers & Internet

1 Answer

The Aspire 5315 series model#ICL50 I can't get windows to start after putting in my password, the windows icon just keep spinning but before that happened and I could boot all the way up, Everything...


From the information you give it sounds like you may have virus on your pc! Try to bot it from a live cd like some linux ditro(i.e. Ubuntu) and run an antivirus software. If that doesn't work your best choice is to format it. If that still doesn't fix it then it's probably a problem with your HDD and you have to take it to a repair shop

May 24, 2011 | Aspire Acer AS5315-2856 Laptop

1 Answer

Samsung YP U5AB- all files in device accidentally erased. Now the computer software doesn't recognise the device.


my samsung YP-U5AB/MEA is not working when i'm turning it on , the screen doesn't turn on but when i put it on the computer i can save things on it but it doesn't work ....help please ???

Feb 20, 2011 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...