Question about Toshiba CF27H50 TV

1 Answer

The set is almost 10 years old and has always worked perfect until today. . .

We used the set earlier today for about an hour then turned it for for couple of hours. When I turned it on it came on as usual then after about 10 seconds, the screen went blank. No sound, no display, no nothing. The set is still on, you can see the fuzzy's. If you turn it off and back on it does nothing. If you let it sit abit, cooling off?, it comes on but will go off again after about 10 seconds. I hate to spend a lot on a 10 year old TV but hate to give up on it if it is something simple. Any ideas?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers

It soulds as of your solder joints are getting old and starting to crack. If the screen goes completely black then I would resolder all the major solder joints on the main PC board, and if you mean that the screen goes to all snow (as if the cable went out) then I would also pull the tuner and resolder the joints inside it too. If you do not have experience soldering on small PC boards then allow a qualified tech to handle it for you. The fact that it works sometimes means that all major components are fine and the repair shouldnt cost too much.

Posted on Jul 13, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I fix Springfield Precise Time atomic clock which has correct time on large (minute) hand but is behind several hours on hour hand?


I'm not sure if we have the same clock. Mine has needed batteries for a while, finally picked them up today. Once the batteries were in I had to reset the Zone by pressing and holding "CLK/CAL" button until the time blinks, then release and push the button until you see one single number on there... then set the zone. There is info in the user's guide (I can't find mine) so I kept changing until the time was correct. Now works perfectly.

Jan 23, 2012 | Audio Players & Recorders

1 Answer

I had the TV on earlier tonight. Turned it off. No problems. I turned it back on a couple of hours later and it started OK .. normal sounds of the tube 'kicking in'. I had volume, and then the entire...


Try a different source on the tv to see if the tv is toast. Ten years is quite old and tvs have come on a long way since this one. Alternatively try a different tv on the cable box.

May 03, 2011 | Panasonic CT-36SX31 36" TV

1 Answer

Power is no long working


try pushing the reset button on the serge protector it my be turned off...

Apr 13, 2009 | Televison & Video

1 Answer

Samsung Automatic cut of or turn of from working After 4hrs


Dear friend,
ngfam at you service! happy to assist!

There is a fire danger here!
CALL SERVICE RIGHT AWAY!!!!!!!!!!!!!!!!

How old is the appliance ?
If it's 10 years old or more it's not worth sinking good money into bad !Todays appliances are so much more efficient that you save money on you electric bill!

Below I gave you a nation wide service thats very good!

We sell appliances for 65 years and I recommend this nation wide Factory repair service!

Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!

Happy to assist you,
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!

Aug 19, 2008 | Samsung RS2630SH Side by Side Refrigerator

1 Answer

Wheelwriter 10 Problems


Sounds like a bad keyboard. does it type at all?

DickyO

May 14, 2008 | Lexmark Wheelwriter 10 Series II...

1 Answer

TV won't turn on


How old is this TV?
My experiance is to not put money into a TV that is over ten years old. TVs stress out their electronic components worse than almost any other electronic product. After 10 years, there are so many parts that are ready to fail that your are probably wasting your money trying to get any more life out of it.
Another option is to wholesale replace the main board by sending it to Module Exchange at 972-298-1212, or PTS Electronics 800-844-7871 ptscorp.com.
Be careful on buying a new one though. Often times, these new technology ones are much worse. Always Google the model number of the set you intend to buy and add the word 'repair' or 'complaint' to see if it is one of the many models that are customer service nightmares being produced by even the most reputable companies today.
Hope ya fix it!

Feb 19, 2008 | Televison & Video

1 Answer

Older Sony Trinitron (over 10 years old)


My experiance is to not put money into a TV that is over ten years old. TVs stress out their electronic components worse than almost any other electronic product. After 10 years, there are so many parts that are ready to fail that your are probably wasting your money trying to get any more life out of it.
Be careful on buying a new one though. Often times, they are much worse. Always Google the model number of the set you intend to buy and add the word 'repair' or 'complaint' to see if it is one of the many models that are customer service nightmares being produced by even the most reputable companies today.

Jan 01, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony DSC-S500


you are right it has defective mechanism,  a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.

Oct 11, 2007 | Sony Cyber-Shot DSC-S40 Digital Camera

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75888 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...