My Panasonic the Genius Inverter 2007/08,Model No# NNSD767B,serial 6A87070236 when I start H97 comes and shuts off I unplugged and start again goes for 5seconds only does not go further

H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.

See if this describes what's happening:

Put in time, push start and unit runs for 2 seconds, relay clicks, unit goes off. Cook time on display goes off and clock time comes back. Bad upper interlock switch and charred connector

If so, see http://www.microwavecontrol.com and http://031d26d.namesecurehost.com/mwc/doorsw.txt

Or it may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on them.

In the US, you can get support or find an authorized Panasonic servicer here: http://shop.panasonic.com/support

In Canada, you can get support or find an authorized Panasonic servicer here: http://www.panasonic.com/ca/

If you have other questions, please e-mail me at pupista@gmail.com with your full model number as shown on the tag in or on the oven, and your detailed symptoms.

Dec 31, 2016 | Microwave Ovens

1 Answer

Microwave keeps shutting off after a few seconds and error number H97 shows up on display pad. What does this error mean?

Error code H97 is an indication of a possible failure of the Magnetron, DPC board or the High Voltage Inverter board. It could be just a loose wire connection also between the DPC board and the High Voltage Inverter board.

This failure will require a service technician to diagnose and repair.

Jan 24, 2015 | Panasonic Microwave Ovens

2 Answers

Panasonic inverter 900w microwave fault code h97

H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

Apr 13, 2013 | Panasonic Genius Prestige Nnsd997s...

1 Answer

Panasonic Inverter Genius Sensor 1250W reads code H97

H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.

It may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 02, 2012 | Microwave Ovens

1 Answer

Panasonic nn-sn778s microwave shuts off and no heat- H97 is error code

H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Aug 21, 2012 | Panasonic Genius Prestige Nnsd997s -...

1 Answer

I own a panasonic genius prestige microwave oven and have the error code H97 can you tell me what this is?

this error comes when hardware issue

error error code H97 hardware problem

May 16, 2012 | Panasonic Genius Prestige Nnsd997s -...

1 Answer

My Microsoft says H97 and won't start running and goes back to H97.

The "H97" error means that the microwave's inverter has shorted out and does not work any more. The microwave cannot transfer power to create heat, and the part has malfunctions and requires replacement. Use your microwave serial number and Panasonic customer service to find the proper part for the microwave.

Oct 05, 2011 | Panasonic Microwave Ovens

1 Answer

1200 watt panasonic genius shuts down

If it stops after 7 seconds, it has a problem with the inverter.

If it stops at 16 seconds and is a sensor model, it probably has a defective humidity sensor.

If it stops after 22 seconds, that means the controller has detected a problem, usually a problem with the inverter, controller, magnetron, or a bad connection from one or the other.

Display codes H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.

That may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

May 26, 2010 | Panasonic Microwave Ovens

1 Answer

Error code h97, on a genius prestige microwave - nn-sd787st. what does this mean?

Hello :

Troubleshooting of Inverter Circuit (U) and Magnetron .

This oven is programmed with a self diagnostics failure code system which will help for troubleshooting, H97, H98 and H99 are the provided failure magnetron and inverter circuit problem areas. This section explains failure codes of H97, H98 and H99. H97, H98 and H99 appears in display window a short time after start key is pressed and there is no microwave oscillation.

WARNING :

The microwave is capable of giving you a serious electrical shock even when it's unplugged , so I recommend you to call a repair technician for help .

please don't forget to rate .

good luck .

Apr 13, 2010 | Panasonic NN-SD797S Microwave Oven

1 Answer

Panasonic Model NNS768BA Genius Premier 1100W Display works - nothing else comes up H98

H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.

Due to the lethal voltages used and produced, I do not recommend that an inexperienced person work on these.

I would recommend that you contact your nearest Panasonic-authorized servicer.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Sep 14, 2008 | Panasonic Microwave Ovens

Not finding what you are looking for?

View Most Popular

Microwave Ovens

What does H97 error mean-Microwave will not start

Microwave Ovens

Open Questions:

0 Answers

Model NN-K573WF panasonic Microwave settings switch off after 27 seconds. please reply

Aug 13, 2017 | Panasonic Microwave Ovens

0 Answers

model NN-K573WF panasonic Microwave settings switch off after 27 seconds

Aug 13, 2017 | Panasonic Microwave Ovens

0 Answers

I have a panasonic microwave C784 WF there is a noisy sound when it works could you please help me with this issue

Aug 13, 2017 | Panasonic Microwave Ovens

0 Answers

I have a panasonic microwave C784 WF there is a noisy sound when it works could you please help me with this issue

Aug 13, 2017 | Panasonic Microwave Ovens

Ask a Question

Usually answered in minutes!

Top Panasonic Microwave Ovens Experts

William Miller

Level 3 Expert

9047 Answers

Jerry Greenberg

Level 3 Expert

1667 Answers

SHARCNET-USA

Level 3 Expert

2130 Answers

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Have a manual for Panasonic Microwave Ovens? Or just drag it here!

6ya staff · Answer 1 · 1/2/2017 12:00:00 AM

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

William Miller · Answer 2 · 12/7/2007 12:00:00 AM

In most cases, this is a problem with the inverter but it may be a bad magnetron.

Due to the lethal voltages used and produced, I do not recommend that an inexperienced person work on these.

I would recommend that you contact your nearest Panasonic-authorized servicer. You can find one here:

http://www2.panasonic.com/webapp/wcs/stores/servlet/vServiceLocator?storeId=15001

We're happy to help and we appreciate your thoughtful rating of our answer.

lwvns · Answer 3 · 4/24/2010 12:00:00 AM

lwvns

1 Answer

SOURCE: My Panasonic Inverter Genius Sensor 1250W Lights

microwave is in lock mode. How do you unlock to use?

Posted on Apr 24, 2010

John Cunningham · Answer 4 · 3/13/2012 12:00:00 AM

John Cunningham

6771 Answers

SOURCE: Model: NN-SD277W. serial number: 6A88040672 A.

There is a dead short in the microwave oven that can be any number of things, yes you will need a pro to fix this and I suggest an estimate first.

Posted on Mar 13, 2012

William Miller · Answer 5 · 11/3/2012 12:00:00 AM

H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.

It may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

My Panasonic the Genius Inverter 2007/08,Model No# NNSD767B,serial 6A87070236 when I start H97 comes and shuts off I unplugged and start again goes for 5seconds only does not go further

5 Suggested Answers

6ya staff

William Miller

lwvns

John Cunningham

William Miller

Add Your Answer

Attachments: Added items

Related Questions:

What does H97 error mean-Microwave will not start

Microwave keeps shutting off after a few seconds and error number H97 shows up on display pad. What does this error mean?

Panasonic inverter 900w microwave fault code h97

Panasonic Inverter Genius Sensor 1250W reads code H97

Panasonic nn-sn778s microwave shuts off and no heat- H97 is error code

I own a panasonic genius prestige microwave oven and have the error code H97 can you tell me what this is?

My Microsoft says H97 and won't start running and goes back to H97.

1200 watt panasonic genius shuts down

Error code h97, on a genius prestige microwave - nn-sd787st. what does this mean?

Panasonic Model NNS768BA Genius Premier 1100W Display works - nothing else comes up H98

Not finding what you are looking for?

Microwave Ovens

What does H97 error mean-Microwave will not start

Open Questions:

Model NN-K573WF panasonic Microwave settings switch off after 27 seconds. please reply

model NN-K573WF panasonic Microwave settings switch off after 27 seconds

I have a panasonic microwave C784 WF there is a noisy sound when it works could you please help me with this issue

I have a panasonic microwave C784 WF there is a noisy sound when it works could you please help me with this issue

Related Topics:

Ask a Question

Top Panasonic Microwave Ovens Experts

William Miller

Jerry Greenberg

SHARCNET-USA

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Manuals & User Guides

Nn-p794_sn747_sn757_sn797_t945_sn947...

KXTG4132-MUL.PDF....

Nnsf460m.pdf. user-manual-Nn-Sf460m 27...

My Panasonic the Genius Inverter 2007/08,Model No# NNSD767B,serial 6A87070236 when I start H97 comes and shuts off I unplugged and start again goes for 5seconds only does not go further

5 Suggested Answers

6ya staff

William Miller

lwvns

John Cunningham

William Miller

Add Your Answer

Attachments: Added items

Related Questions:

What does H97 error mean-Microwave will not start

Microwave keeps shutting off after a few seconds and error number H97 shows up on display pad. What does this error mean?

Panasonic inverter 900w microwave fault code h97

Panasonic Inverter Genius Sensor 1250W reads code H97

Panasonic nn-sn778s microwave shuts off and no heat- H97 is error code

I own a panasonic genius prestige microwave oven and have the error code H97 can you tell me what this is?

My Microsoft says H97 and won't start running and goes back to H97.

1200 watt panasonic genius shuts down

Error code h97, on a genius prestige microwave - nn-sd787st. what does this mean?

Panasonic Model NNS768BA Genius Premier 1100W Display works - nothing else comes up H98

Not finding what you are looking for?

Microwave Ovens

What does H97 error mean-Microwave will not start

Open Questions:

Model NN-K573WF panasonic Microwave settings switch off after 27 seconds. please reply

model NN-K573WF panasonic Microwave settings switch off after 27 seconds

I have a panasonic microwave C784 WF there is a noisy sound when it works could you please help me with this issue

I have a panasonic microwave C784 WF there is a noisy sound when it works could you please help me with this issue

Related Topics:

Ask a Question

Popular Questions

Panasonic Microwave Dimension 4 convection (11 yrs old)

How do I unlock my panaosonic microwave

How do I get my

Microwave Problems

Panasonic inverter 900w microwave fault code h97

Top Panasonic Microwave Ovens Experts

William Miller

Jerry Greenberg

SHARCNET-USA

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Manuals & User Guides

Nn-p794_sn747_sn757_sn797_t945_sn947...

KXTG4132-MUL.PDF....

Nnsf460m.pdf. user-manual-Nn-Sf460m 27...