Question about GE EasyCam Webcam

1 Answer

I have not a camera - GE EasyCam Webcam

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can uyou buy..............

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My new Microsoft Lifecam VX5000 software will not install. I put it in and nothing happens...nothing


go to come on if not try pressing Thur ring on the camera to get it to come on, control panel remove the camera software, unplug camera reinstall software with out camera connected then after the software has been installed hook up the camera, click on the camera icon and turn on the camera a green light should on next twist the bezel ring to focus the the lens of the camera and then use the light and darkness setting to get the camera works right.

Apr 14, 2010 | Microsoft LifeCam VX-1000 Webcam

1 Answer

No picture , computer recognizes the plug in but I have no power to the camera...


Yes, the computer will recognize your USB connection coming from the camera, that not mean it has seen the camera. You must switch on the camera for the PC to see the camera and communicate with it. Just switch on the camera.

Sep 10, 2009 | Logitech QuickCam Messenger Web Camera

1 Answer

How to connect to remote camera


To create new Camera Window
  • Click New Camera from the File menu.
  • Camera Setting dialog box appears.
Camera Setting dialog box

Camera Setting dialog box helps you control selected video source. To open the Camera Settings dialog box, select Camera Settings from the File menu.

Set a preview rate in the Preview Frame Rate box. It indicates the number of frames per second in the camera window. The default value is 10 frames per second. This value doesn't interfere with broadcast or record frame rate.


Remote Cameras
Remote camera is another Active WebCam program with enabled Remote Access launched on remote computer. Both programs use UDP protocol to communicate each other. If connection with Remote camera goes through firewall, make sure that the IP address of your computer, local and remote ports are opened on the firewall, and the UDP protocol is enabled.

To connect to Remote Camera
In the Device tab click to select Remote Camera.

Specify the computer address in the IP address box. Don't place the protocol prefix (like http://) in the address, just four digits of IP address delimited by dots, like: 192.168.1.101. You can find out the remote computer IP address by clicking Get Computer IP Address from the Tools menu on the remote computer.

Type port, which is opened on remote computer for remote access in the Remote Port box. This value is specified in the Port box in the Broadcasting | Remote Access properties on the remote computer.

Specify port, which will be used to receive data from remote camera, in the Local Port box. If your network uses firewall, make sure that Local Port and computer's IP address are opened in the firewall. Use the Check the Port Availability button to make sure that this port is not used by another program.

If the remote computer requires authorization, enter user name and password in the appropriate boxes. The authorization could be set in the Broadcasting tab in the Camera Settings window in the Remote Access Additional Settings window on the remote computer.
If the Remember Password check box is checked, the user name and password will be saved among the session parameters.

Cycle through cameras
If you have multiple cameras you can set up a cycler to have the program to change cameras automatically.

To configure the Camera Cycler:
  • Click Camera Settings from the File menu.
  • Select Cycle through cameras to activate cycler.
  • Type cycler interval in seconds.
Select cameras to cycle.

Jul 13, 2009 | HP USB Web Camera

1 Answer

I have a g shot d5123 digital camera its also a


Check the manual of your digital camera to see if it can be used as a webcam. Many digital cameras have this functionality and even come with webcam software. If your camera didn't come with webcam software, use a third party web cam application such as SarmSoft WebCam. Find SarmSoft WebCam at ShareUp.com.
Plug your digital camera's power adapter into the camera. Some won't function as a webcam unless they are plugged into A/C power. Even if your digital camera functions as a webcam while on batteries, A/C power saves your batteries and prevents your camera from shutting off in the middle of a broadcast.
Connect a video cable into your digital camera's video "out" port. Your camera likely came with a cable made for connecting it to a to a video source. Plug the other end of the video cable into your video card's video "in" port.
Set up your camera as close to your monitor as possible. This allows better face to face communication.
Position yourself about 2 to 3 feet away from your digital camera. Most digital camera's focus best at this distance when used as a webcam.
Use a separate microphone if your digital camera doesn't transmit sound when used as a webcam. Plug the microphone into the microphone jack of your sound card.

Jul 06, 2009 | Webcams

1 Answer

I cant instal web camera in messenger


hi,

First, make sure you follow the instructions from your camera manufacturer to ensure the proper installation of your camera.
This involves inserting the camera installation CD, being guided through a few steps for installation, and restarting your computer. Plugging in the camera's USB cord at the incorrect time during the camera software installation procedure can cause various problems.
To reinstall your webcam:
Uninstall any existing camera installations. Click "Start," "Settings," "Control Panel," and "Add/Remove Programs." From the list, choose your webcam software and click Remove.
Unplug the camera's USB cord from the computer.
Reboot your computer.
Insert your camera's setup/installation CD.
Follow the instructions described by the camera setup program, and plug in your camera only when prompted. This is usually done after restarting your computer.


thanks,

P.S. rate our answers properly.

Feb 19, 2009 | Logitech Quickcam IM 961361-0403 Webcam

1 Answer

I am not sure how to install the software


WARNING: DO NOT connect the camera to your computer before installing the software.
To install the software, insert the Logitech camera software CD into your computer's CD-ROM drive. The Setup screen should appear. If it does not, please perform the following steps:
  1. Click Start and then Run.
  2. Type D:Setup.exe and press the Enter key.
  3. Follow the on-screen instructions.
After the computer reboots, the driver installation for the camera will start. Do not connect the camera until the setup prompts you to connect the camera cable to your computer.
While the driver installation progresses, remove the camera and camera base from the packaging and mount the camera on the camera base.
When prompted, plug the camera into the USB port. You should see the following diagram to let you know where to plug the camera in:
696.gif
After the installation is complete, the camera should be ready to use.

Thanks

Aug 21, 2008 | Logitech QuickCam Messenger Web Camera

1 Answer

Quick cam


Hi, First verify that your camera is plug in to your USB port, likewise check if it is correctly installed by right clicking on My Computer, click on Properties, click on Hardware tab, click on Device Manager Button, expand your Imaging Devices, see if your camera is listed. If it is,make sure it does not have any yellow or red mark. In Control Panel, go to Scanner and Cameras, right click on your camera, Properties, click Test Scanners and Camera button, Windows will perform a diagnostic test. Left click on My Computer, under Scanners * Cameras, click on your camera. You should be able to view what your camera is seeing. If you're using Yahoo Messenger, click on Messenger, scroll down to and click My Webcam. In the camera view window, click on File, Preferences. In the Yahoo Messnger Preferences, scroll down to and click WebCam. Click on Camera Source button, choose your camera, OK. Click on Camera Settings button, adjust Camera Controls to your preference, Apply, OK. If the camera is not in any of the four above, you may need to re-install using the CD that came with the camera. Good luck and post back how things are and/or should you need further information. kind regards.

Aug 23, 2007 | Logitech QuickCam Pro 5000 Webcam

Not finding what you are looking for?
GE EasyCam Webcam Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Teet Bergmann

Level 3 Expert

565 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you a GE Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...