Question about Washing Machines
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
E10 on Zanussi W/D
I had E10 on Zanussi W/D.
The machine would wash but not dry.
Changed the water inlet valve assembly.
All working again.
All credit to wildwest1959, thanks.
Posted on Apr 24, 2009
SOURCE: e10 error code
I had this problem, the washer/dryer stopped working while in the drying cycle and displayed e10 message. It was caused by a faulty three-way inlet valve. The solenoid controlling flow to dryer condenser proved to be open circuit. Pulled washer out from under counter top, unplugged, removed top cover, tested solenoid circuits with ohm meter and found one solenoid was faulty. The filter going into the unit was clear. Replaced whole three way component with one ordered on Internet and all now works fine. Noticed that during drying cycle, water to condenser is constantly being switched on and off, explaining why the green condenser solenoid is the one that wears out first.
Posted on Feb 21, 2010
You’re in the FAV6800AW forum so I assume your machine type is a FAV6800A or FAV9800A the LCD flavor of the machine. I’m an owner not a repair person.
Unfortunately this is not a true DIY forum it lacks prompting the forum member for Model number and Serial number both can be found here on the machine.
Can you feed us back model # and s/n only. We only need the first two numbers 10 thru 17 for the series.
If you are in the right forum then see this post Clutch Fix. If you are handy and have basic mechanical skill sets i.e. put those xmas toys together. You can save $$$ that's three figure real life cost if you call in a service repair company.
If your machine type is not this type please don't vote for me like this forum member did helenhearn. I could not get feedback for a simple request like what is the model number of your machine.
I get BS rating from the forum member after I specifically asked not to vote for me if the machine type was not as shown at that link.
Lights are on but nobody home…. New I was in trouble from the get go with this forum member.
I don’t receive any funds from FIXYA I’m an owner trying to help other owners with machine issues.
The rating system is the only credibility measurement I can offer that reflects the quality/knowledge of machine solution issues I can offer for free. At the end of the day it’s about saving the forum member money if the forum member can roll up his/her sleeves and dig in.
If you don't DIY and learn how to extend the service life of your machine the only solutions I see are;
1. “Call in a qualified Repair Service” good luck with that one. Read thru the many post on this machine type of frustrated forum owners. I feel this is not a cost effective solution.
2. Break the machine down and ebay the parts I do real well there on parts buys.
3. Set the 1$K machine out at the curb on bulk trash pick up day.
Let me know if I can help………..Rich
What is a dap code?
Posted on Apr 16, 2010
Tips for a great answer:
Feb 05, 2016 | Washing Machines
Thank you for your inquiry, Barbara Constable!
I see that your Electrolux washer is displaying an "E10" error code. "E10" stands for fill time too long you may want to check the hoses to make sure they are not restricted or kinked this could cause slow fill within your washer. If the hoses look to be in good shape then I would suggest it could be a faulty sensor or control panel. You could additionally reset your washer by disconnecting power from it for ten minutes. If you restore power and it continues to flash "E10" I would recommend having a professional out to properly diagnosis your washer. Hopefully this information is helpful. -Matt
Dec 21, 2014 | Electrolux Washing Machines
Oct 12, 2011 | Washing Machines
Feb 15, 2011 | Frigidaire Washing Machines
Jan 11, 2010 | Kenmore HE2 Plus Front Load Washer
May 30, 2008 | Frigidaire 14 Cycle Tumble Action Washer
Mar 03, 2007 | Zanussi WJS1265W Front Load Washer/Dryer
25 people viewed this question
Usually answered in minutes!