Question about Go Ped GSR Sport Gas Powered City Scooter

2 Answers

BladeZ 40cc go-ped doesn't strart... well kinda

Today i got a BladeZ 40cc goped for $70 and actually it looks pretty new! Great price right? Well anyway, when i got it home it took me about 5 hours to get it started (the guy that sold it to me said it hasn't run in a couple of years). When i got on it, the ped was REALLY sluggish. In fact it didn't even reach past 5mph. It also died within 60 seconds from when i started the thing. I havn't been able to get it started since. I checked the spark plug and seemed to be working fine. Have any ideas what's going on?

Posted by on

  • 1 more comment 
  • Anonymous Apr 08, 2009


  • dawpen
    dawpen Mar 27, 2012

    change your fuel filter take your carb apart and clean it real good your carb number should be wyk 224b so get the kit for that put a new spark plug in the gap should be .24 and check to see if your belts are to tight there should be a 1/2 play in them hope this helps bud.

  • Anonymous Mar 24, 2014

    it will die after i ride it down the road for a couple seconds



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Clean the carb and make sure it adjusted right

Posted on Feb 06, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I know what the problem is. the problem is the motor.either the guy who sold it to you added something other than 2-stroke oil in with the gas, so he clogged the engine/motor. basically your going to need a brand new motor. sorry to tell you...

Posted on Aug 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My goped sport engine shut off and wont start again, what I can do?

Try the steps on this website.

May 30, 2014 | Go Ped GSR Sport Gas Powered City Scooter

1 Answer

How can I improve the fender brake on a Knowped, especially for wet conditions?

Why don't you google adding a brake to a know ped - bet you will get some nice re- neck adapter that will solve your dilemma. Have you seen their re-neck retread for lawnmower? LOL -------- Does work!

Sep 04, 2017 | Go Ped Know Ped Goped Push Scooter

2 Answers

I bought a second hand go-ped, there is no indication of any brand, anything, I need to buy some spare parts, but do know the displacement- probably it is midi goped 41, the spark plug is BM6A. How...

Go-Ped or GoPed is a brand of powered scooter and if it is a Go-Ped brand powered scooter then you should find the word "Go-Ped" on it somewhere. I think on average a Go-Ped will have the Go-Ped brand on it in about 17 different places and would seem unlikely that that all the labels are removed.

Jan 30, 2011 | Go Ped Toys

2 Answers

My scooter starts runs good then dies

Replace the battery, after sometime the battery starts to lose it's initial capacity.

For battery replacement go to, select your scooter model, then click replacement parts and find the batteries on the part list.

Aug 02, 2010 | Go Ped Know Ped Goped Push Scooter

2 Answers

My mo ped stutters at high speeds

Take off Air filter, look inside the carb and pull throttle all the way, the circle should be fully open, if not it may not be getting the full amount of gas it could be, Clean the carb as well, take it apart and clean the mesh filter, To check your plug, just unscrew it from engine, put the cap on the plug, place the tip of the plug on something metal and pull start the engine to see if its sparking. I think you have a carb problem though, clean it and clean your filter and you should be good. If its a stock engine on a goped sport than you should mix 3.2 ounces of oil per gallon. Hope this helps

Apr 10, 2010 | Go Ped GSR Sport Gas Powered City Scooter

2 Answers

Goped wont stay running

try cleaning you carb and spark plug

also check your fuel mixture

Jul 07, 2009 | Go Ped Know Ped Goped Push Scooter

2 Answers

Need a Repair Manual for Motorized Scooter

Go to this website, they offer everything including manuals, but they will charge you for it, they have a really good selection of parts also.

Mar 17, 2009 | Go Ped GSR Sport Gas Powered City Scooter

2 Answers

Once i Turn the throttle my goped turns off

it may be over fueling if you have turned the jet id sugest hold at full throttle and adjust jet whilst running it on full power

Jan 25, 2009 | Go Ped Know Ped Goped Push Scooter

Not finding what you are looking for?
Go Ped GSR Sport Gas Powered City Scooter Logo

Related Topics:

744 people viewed this question

Ask a Question

Usually answered in minutes!

Top Go Ped Toys Experts


Level 3 Expert

78919 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

19576 Answers

ray gallant

Level 3 Expert

51092 Answers

Are you a Go Ped Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides