Question about Lexmark Optra T614 Laser Printer

1 Answer

How do I change the printer address on my optra t614

I need to change it to - 192.168.1.251 - from 192.168.0.251 so it wont conflict with my router?
Thankyou:

Posted by on

  • Andrew Baker Jan 26, 2009

    Thankyou. I really appreciate you taking the time to help me - unfortunately with the conflict of addresses my printer has disapppeared. It cannot be found by inputting its IP address. I have tried "pinging' it to no avail. So I will retrace my steps and put the original router back and see if the printer can re-appear on the system?? thanks again

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 32 Answers

I only work on HP printers, but I believe I've seen this model before, if it is simply a network printer, it should have it's own web administrator console. Basically, if you type in 192.168.0.251 it should bring you to a control panel for the printer where you will be able to change the IP address. (Note: You will lose connection to the printer when the IP address is changed, but you can simply access it by entering the new IP address in your web browser)

Posted on Jan 25, 2009

  • wprodgers
    wprodgers Jan 26, 2009


    You can try resetting the printer's NVRAM as follows:

    Turn the printer off.

    Now press and hold down the right Menu arrow button (>), the Select button, and the Go button at the same time.

    While continuing to hold all three of these buttons down, turn on the printer.

    This *Should* reset the printer to factory defaults.

    Then, as long as it can handle DHCP, and is set to do so, the router should assign it a new IP address.

    To edit it, first enter your browsers IP address in your web browser, determine which ip address is your printer, and then use the above solution to assign it the static IP of your choice, good luck!


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the ip address of my printer ..i printed out the menu page and it list an old ip address that i can no longer access


From the operator panel saying "ready". Scroll through the menus to "Network Menu", then scroll to "Standard Network", then to "STD Net Setup", then "TCP/IP", then "Set IP Address". Once you make the desired changes (move through octets using "select" changing numbers using "menu"), make sure to save by pressing the select button until it says "saved".

Nov 14, 2013 | Lexmark Optra T614 Laser Printer

2 Answers

I have lexmark optra T614 there is a sign: error 954 NVRAM Failure. Please help?


Please click on the link provided below for a more detailed instruction on how to correct the problem.

http://bit.ly/pVmdfz


If you need further assistance please contact Lexmark Technical Support.

Apr 21, 2011 | Lexmark Optra T614 Laser Printer

1 Answer

900 Service RIP Softwrae on LexMark Optra T614.


any one of the boards in this printer can create this error it is a software communnications error. start with the easiest one the simm remove it power the unit on do this with each board untill you isolate which one is causing the error. cleaning the contacts sometimes fixes this problem. more times than not is a bad nvram chip on a board

Nov 23, 2009 | Lexmark Optra T614 Laser Printer

1 Answer

What is the default password for the Lexmark T614?


There is now default password. The default is without password. Did you try a cold reset?? Push and hold down butons 2,3 and 5 while powering on the machine. Release the buttons when innitialisation is on the display.
Gerrit jan

Nov 04, 2009 | Lexmark Optra T614 Laser Printer

1 Answer

Invalid engine code


The easiest way to solve this is to work through Lexmark Technical Support.

Their web site may have the correct engine code on their site, but installation of the code can be tricky.

Are you getting a 900 Invalid Engine code message?

Don

Apr 23, 2009 | Lexmark Optra T614 Laser Printer

1 Answer

Lexmark Optra T614 Won't accept toner cartridge


there is a smart chip on the right side top of the toner cartridge clean these 2 connections with thee green plastic brillow on the back of a sponge. just do this lightly. cleaning this should fix your problem

Apr 11, 2009 | Lexmark Optra T614 Laser Printer

1 Answer

Conflict with new router address on my network


Printer IP needs to be in the same range as the computers and router. All should have the same first 3 sets of numbers....

192.168.1.

the last set of numbers identifies the individual address of the piece of equipment.

Change the IP address on the printer to 192.168.1.251 and see if you can see it in the internet explorer address bar...(should bring up a web page that displays the printers status) The other numbers should look like this:

255.255.255.0 (or similiar)
192.168.1.254 (Gateway ?)

Make sure the PC's all have the same first 3 sets also...or they won't see the printer.

Jan 25, 2009 | Lexmark Optra T614 Laser Printer

1 Answer

I'm currently experiencing a paper jam error 242 tray 2 on the Lexmark Optra 614 Laser Printer. Any clues?


try changing feed rollers in tray. To test or temporary fix remove the rubber tires and flip them inside out, then reinstall.





















Dec 24, 2008 | Lexmark Optra T614 Laser Printer

1 Answer

Optra T614 printer


i had the same problem and it went away after i removed the main circuit board and reinstalled it. (left side of the machine)

Apr 03, 2008 | Lexmark Optra T614 Laser Printer

Not finding what you are looking for?
Lexmark Optra T614 Laser Printer Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...