Question about Hotpoint -Ariston Aquarius WD645 Front Load All-in-One Washer / Dryer

Open Question

Hotpoint WD645 washer dryer coming up with TEST on display, any ideas??

Machine displays TEST no matter what programme you select and does not take in any water, just goes through a simple test cycle.

Posted by on

  • Delroy Thomas Jan 22, 2013

    Thank you to all those who answered my question. Problem solved. Cheers

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Hotpoint Aquarius WD645

If you by accident press the start button and the cancel button at the same time it puts the washer into demo mode.To switch it off press both buttons at the same time and hold until dEND is displayed. Sometimes you have to keep trying but it will work, it did with mine ok.

Posted on Nov 27, 2006

Ad
  • 1294 Answers

SOURCE: "Test" displays no washing done!

Your test mode is on, maybe accidently. Press "start", "cancel", "on" & "off" together for 10 secs, you will see d/off come on the display. Do the same & the test mode comes on again.

Rate pl.

Posted on Dec 02, 2007

  • 100 Answers

SOURCE: my hotpoint ultima super silent displays 'test' but dnt run cycle

its in factory test mode, this can be set by pressing the on and start buttons together. to reset, turn on while pressing the on and start together until dOFF appears

Posted on Jan 27, 2009

  • 1 Answer

SOURCE: 'test' displayed on washing machine

After pressing different buttons and waiting 10 to 15 seconds after turning the power off, I have finally found the solution.
When you have pressed the "Start/Cancel" button to start your wash programme the LCD shows "test".
You must then press the "Start/Cancel" button which will give you the normal temperature and washing time and then importantly you must depress both the "Start/Cancel" button with the "On/Off" button which will give you a different LCD message and then it will automatically resets itself.

ALL THE BEST!

Posted on Feb 23, 2009

  • 1294 Answers

SOURCE: keeps going on test cycle

Try the following, may work:

  1. Press the Start/Cancel button together until all the console Led's illuminate
  2. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  3. Default screen should return and you can select a new programme

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The washer comes up "TEST" instead of the


Hello & Welcome to FixYa

Someone accidentally put it into TEST mode and to get it out of the test mode follow this:-- Unplug the washer for 4 minutes and then plug it back and press start, the display should go daft. Press start again and the display should settle down. Now press the on/off button and the start button at the same time and hold them down for a few seconds until the display shows d-end or d-off. Please get back to me if you have any other questions.

Kevin

Feb 15, 2011 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Wd645 has no power to on/off switch. changed plug


Could be mains choke. Mains power comes into mahine via wall socket /worth checking this then onto mains filter/Choke..then to switch..So if no power here check this..wish you well

Oct 07, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Test mode


press start once
then press start again now hold on/off and cancel together for a few secs should no say d/off or something should work now

Aug 22, 2009 | Hotpoint Ultima WF865 Front Load Washer

2 Answers

'test' displayed on washing machine


After pressing different buttons and waiting 10 to 15 seconds after turning the power off, I have finally found the solution.
When you have pressed the "Start/Cancel" button to start your wash programme the LCD shows "test".
You must then press the "Start/Cancel" button which will give you the normal temperature and washing time and then importantly you must depress both the "Start/Cancel" button with the "On/Off" button which will give you a different LCD message and then it will automatically resets itself.

ALL THE BEST!

Jul 31, 2008 | Hotpoint Aquarius WD640 Front Load...

4 Answers

Hotpoint wf840 displays "test"


Try This - It works for the Washer Dryers so it May work on your Washer.

  1. Press the Start/Cancel button until all the console Led's Illuminate
  2. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  3. Default screen should return and you can select a new programme
Hope this Helps.

Mar 12, 2008 | Hotpoint Ultima WF840 Front Load Washer /...

2 Answers

Hotpoint Aquarius WD640 Washer Dryer


I had a similar experience.  I had to try a few times - it has to be EXACTLY together and then the magic "doff" shall appear and save the world.

Dec 19, 2007 | Hotpoint Aquarius WD640 Front Load...

1 Answer

"Test" displays no washing done!


Your test mode is on, maybe accidently. Press "start", "cancel", "on" & "off" together for 10 secs, you will see d/off come on the display. Do the same & the test mode comes on again.

Rate pl.

Dec 02, 2007 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Test


When it is turned on, press the On/Off button and the Start/Cancel button at the same time until the display reads "dOff". This worked for my washing machine after repeatedly displaying "Test" and doing nothing else.

Nov 20, 2007 | Hotpoint Ultima WF840 Front Load Washer /...

1 Answer

Display panel (cont.)


hi there try pressing and holding the start button for about eight seconds

Oct 10, 2007 | Hotpoint Aquarius WD640 Front Load...

5 Answers

Hotpoint Aquarius WD645


If you by accident press the start button and the cancel button at the same time it puts the washer into demo mode.To switch it off press both buttons at the same time and hold until dEND is displayed. Sometimes you have to keep trying but it will work, it did with mine ok.

Sep 09, 2006 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Hotpoint -Ariston Aquarius WD645 Front Load All-in-One Washer / Dryer Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

ptpumpman

Level 3 Expert

407 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...