Question about Microwave Ovens
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 17, 2015 | Sunbeam Microwave Ovens
Feb 04, 2013 | Sunbeam 900-watt Digital Microwave Oven...
Make sure that the program controller is working if not check
power - step down supply, the pads are responding- if not faulty pads- or the
door switches, if the switch contact are not good then it will not trigger the
processor to switch on the waveguides. If the lights or fan work without any
display or action of program being triggered to start then it can be a possible
fault on the main board or the processor. Sometimes insect secretion can short
the board and display panel and so the processor can work in such an erratic
manner. If so clean, solder and reset the board. Now identify the parts by
clicking this link: http://www.espares.co.uk/advice/microwave/a/5/141/identifying-microwave-parts.html
If there is no heating
please do not switch on unless you have confirmed the fault. It is possible
that the Magnetron is faulty, the temperature cut off is faulty or the main
capacitor is short. It is also quite possible that insect can get into the oven
and create soft spots. When you switch on these will create a short and make
the voltage jump and in the long run damage the magnetron. Check this link to
know how a microwave works:
Jan 21, 2013 | Sunbeam SGG5702 - 0.7CF Microwave Oven
Apr 12, 2012 | Microwave Ovens
Mar 08, 2011 | Microwave Ovens
Jan 18, 2011 | Sunbeam SMW750 Microwave Oven
Dec 22, 2010 | Sunbeam Microwave Ovens
Aug 17, 2010 | Sunbeam SMW750 Microwave Oven
Aug 15, 2010 | Sunbeam SBM1000 Microwave Oven
82 people viewed this question
Usually answered in minutes!