Question about Zenith DVB251 Multi-disc DVD Player

Open Question

Connect Zenith speakers model FE 5620 to zenith dvd player dvb251

I was just given a zenith dvd player dvb 251 and speakers model FE 5620 we and te. I would like to make it work as a stereo system since it cannot connect to my tv. Outputs on dvd player and speakers are different though. Is there any way how to make it work?

Thank you

Lily

Posted by on

5 Suggested Answers

SOURCE: charger for Zenith ZPA-314 Portable DVD Player

This web site will give you a list of companies and parts you can get http://www.partstore.com/CustomContent/%7B0% 7D/CustomError.htm?aspxerrorpath=/GetModel.aspx

Posted on Jul 23, 2008

  • 1 Answer

SOURCE: Zenith XBV443 DVD Player / VCR Combo - Set Clock Manualy

I have the Zenith xbv613 model DVD/VCR player and also need to change the clock set up. For the xbv613 I had to switch the player to VCR. The menu button did not bring the clock set up in DVD. When I switched to VCR and hit the menu button the clock set up showed, where I used to right arrow button to change the time. Hope this helps.

Posted on Oct 27, 2008

  • 18 Answers

SOURCE: zenith dvd/vcr mod #6711R1N211C. Need to prog the volume button.

In my manual, to control a sony TV.. the code is number 8 or number 9.

You will hold down TV POWER, hit 8 then release TV POWER.
If that doesn't work, try number 9. Once the batteries are removed, it resets the code, so write it down. It will also over ride your old codes once you input the new one.

Note: Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.


I looked for the section on Stereo, but all I found was the above.
Hope this helps.


Posted on Dec 27, 2008

  • 303 Answers

SOURCE: Need a new ac adapter for a DVP615 portable dvd/cd player (Zenith

You can buy a new one by clicking on the hyperlink:
buy replacement ac power adapter charger cord ZENITH DVP615

Posted on Mar 29, 2009

  • 732 Answers

SOURCE: Manual for Zenith XVB713

alexgao, Might try Lucky Goldstar (LG) , I believe they own Zenith. They (Zenith) have offices and engineering space somewhere in Lincolinshire Illinois. Good luck. 12fixlouie

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just need advice regarding connection to a speaker system, ( altec-lansing ADA885).


a portable DVD player usually doesn't have speaker or line outputs, if yours does just those (red and white) and connect to audio in of the altec lasnings. if no audio output connectors, use the earphone jack with an adaper (1/8 stereo male to stereo pair rca male.

Mar 17, 2011 | Zenith DVP615 Portable DVD Player

1 Answer

I would like to be able to connect the Zenith portable DVD player to my TV to watch DVD's on my TV. I have a model number ZPA-314.


If your DVD player and TV have RCA jacks, (3 wires: 2 audio, 1 video) simply patch between the two. If TV does not have RCA jacks, plug the DVD wires (3) into the 'line input 1' on VCR. This way, the VCR is acting as a 'converter' btwn. the DVD player and the TV.

Feb 05, 2011 | Zenith DVP615 Portable DVD Player

2 Answers

Where can I get a manual mine was destroyed in a flood


Hi,
You can download user manual copy of Zenith XBR413 from HERE.
Click above link and download manual free copy.
Thanks.

Nov 10, 2010 | Zenith XBR413 DVD Recorder

1 Answer

How to connect a 1999 zenith TV to a cable box and


Hello,
Connet the output of the cable box to the DVD player and the TV out output of the DVD player to the TV (TV must be tuned to Channel 0, Chanel 3 or 4). You should be able to use the remote to switch between the DVD signal and the cable signal.

Hope it helps.

Sep 08, 2009 | Zenith A25A23W 25" TV

1 Answer

How to Connect Converter to TV, DVD/VCR and a Stereo?


Connect converter box to your DVD/VCR player at the ant in. Depending on your location you might need a new ant for UHF.

Jun 15, 2009 | Philips DVDR3435V/37 DVD Recorder/VCR

1 Answer

Zenith XBV443 DVD Player / VCR Combo - Set Clock Manualy


I have the Zenith xbv613 model DVD/VCR player and also need to change the clock set up. For the xbv613 I had to switch the player to VCR. The menu button did not bring the clock set up in DVD. When I switched to VCR and hit the menu button the clock set up showed, where I used to right arrow button to change the time. Hope this helps.

Sep 24, 2008 | Zenith XBV443 DVD Player/VCR

2 Answers

Zenith e44w46lcd


hi there,

what is model/maker of your DVD player, and also the TV you have there..

thank you

May 26, 2008 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Disc error


1. Power up unit with no disk in the tray
2. After "no disc" shows on the front display, press PAUSE on the remote
3. Press in order: 1, 4, 7, 2 on the remote (short keypresses). A new screen will show up, EEPROM settings with a green background
4. Write down the EEPROM string for backup/restore purposes in case you screw up. My string was 55 53 00 45 02 55 64 FF (compare with the default string of the 312, which is 55 53 00 45 14 55 64 FF).
5. To enable VCD playback, move the cursor to the "45" (4th group of characters from the left; use the remote up/down arrows to move right/left) and enter "46" or "47" instead, then press ENTER to commit
6. To enable SVCD playback, move the cursor to the "64" field (second from the right) and enter "FE" instead. To enter "F" press "6" on the remote and keep pressed. To enter "E" press "5" on the remote and keep pressed. After you're finished entering "FE" press ENTER on the remote to commit
7. Press PAUSE on the remote to exit the EEPROM screen
8. Power off, then power on again the player
9. It now plays SVCDs and/or VCDs depending on the codes you entered.

The final EEPROM strings with both VCD and SVCD enabled are:
55 53 00 46 02 55 FE FF and
55 53 00 47 02 55 FE FF
(either works)

NB the replacement of 64 by FE was in the past wrongly labeled as Macrovision hack. That's not true. What it really does is enable SVCD playback. If you only do the #5 above, you'll only get VCD playback. If you only do the #6 above, you'll only get SVCD playback. If you do both, you'll get VCD and SVCD playback.

(SVCD playback was especially important to me because I have several hundreds of them - mostly TV shows recorded on my TiVo, then exported to the PC and converted to SVCD)

The other hack for the DVB-312 also works on the 412 (see the configuration screen):
1. press SETUP on the remote
2. Go to "TV Aspect" and move the cursor to "16:9"
3. Press in order: 1, 3, 9, 7, 1, 3, 9 on the remote, then press ENTER

The info showing on that screen for the DVB-412 is:

Model: Zenith ZV8020001
Region: 1
Chip ID: M3355A-B
Servo ver: S101_43180
Microcom ver: V1.50A MP
PROM: 55 53 00 45 02 55 64 FF
Factory reset... done...
(the PROM I listed above is before the VCD/SVCD hack)

Aug 16, 2007 | Zenith DVB412 DVD Player

Not finding what you are looking for?
Zenith DVB251 Multi-disc DVD Player Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73159 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...