Question about Jensen CS10 Speaker

1 Answer

How to connect Jensen subwoofer CS10 to Yamaha Receiver HTR5660

If anyone could help -

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

Does the yamaha have a subwoofer line out RCA type jack? Most receivers with 5.1 output will. Just insert a male rca to male rca patch cable from the receiver to the line in on the subwoofer,( not the speaker wire inputs) Plate on the sub may say low level input, and setup the receiver menu option for SUB? yes/ no to yes, this will direct the low frequencies to the subwoofer.

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get my subwoofer to turn on that is connected to my yamaha receiver


MAke sure you have the lfe output enabled. Or you could try to use a headphone to rca adapter from a cd player/phone to test it directly.

Feb 21, 2013 | Klipsch Speakers & Subwoofers

3 Answers

I have a yamaha nx sw150 subwoofer that i want to connect to a pioneer receiver vsx 1020 that has no system connector that the original yamaha receiver had,is it possible to connect the subwwofer to this...


Parts from all-in-one packages like this aren't inended to be pieced out to other applications. Proprietary connections are a huge clue and disincentive.

http://www2.yamaha.co.jp/manual/pdf/av/english/sys/NX-P150_e.pdf

A look at other Fixya queries gives this answer:

http://www.fixya.com/support/t4959365-yamaha_sub_woofer_model_nx_sw150

"I have this sub. The system connector jack needs a 12V DC signal to turn on. If you don't have a suitable Yamaha receiver with this connection, use any 12 V DC adapter with a 1/8 in mono plug (the tip should be positive)."

I imagine the subwoofer could be opened up and whatever circuitry is enabled by the Control signal could simply be jumpered "true" so it is always ON. That would mean the amp would be drawing power at all times, though.

Jul 31, 2011 | Yamaha Speakers & Subwoofers

1 Answer

Hello ! I'm not sure how to connect my kef psw 2500 sub to my yamaha amp. I've got a subwoofer out on my amp but there's 4 inputs on the sub and I don't no which one to use ! Please help as getting...


Just for clarity, I need to explain what the four inputs are on the KEF subwoofer. There is a left and right RCA input which is the input signal to the subwoofer and there is a left and right RCA output which is the High Pass output from the subwoofer.

On the back of the Yamaha receiver, you said you have a subwoofer output. This output is most likely the mono subwoofer part of the home theater system and can be used if you like. The left right signal input into the KEF is summed into mono so if you only connect one channel you will basically reduce the signal level by 1/2 (-3dB) but it will work fine.

Alternatively, if your Yamaha receiver has monitor out and monitor in, you can run the monitor output signals to the subwoofer and you can then run the high pass outputs from the subwoofer back to the monitor in. This will give you the subwoofer and provide a smoother signal matching with your audio system.

It is not always easy to connect the subwoofer up to an integrated receiver/home cinema system using the high pass channels of the subwoofer as you don't always have access to the analog output and input of the front channels. In this case, just use the Subwoofer output or just the monitor out only.

I hope this solution is helpful.

Dec 03, 2010 | KEF Audio PSW 2500 Subwoofer

1 Answer

Yamaha HTR-5660 receiver but no surround sound


have you tried putting it in a different program mode?

Jul 04, 2009 | Jensen CS10 Speaker

1 Answer

I CANNOT GET MY OLDER VCR TO WORK WITH NEWER EQUIPMENT.


The VCR is straight analog/composite and if you are trying to get it to show up on the TV via the HDMI connection between the receiver and the TV it is probably not going to work correctly until you add a dedicated pair of audio connection from the receiver to the TV...

Mar 16, 2009 | Jensen JW250 Main / Stereo Speaker

2 Answers

Which subwoofer????


Cameron,
I have the same problem, check these link and you will understanding more how it works. My understanding was bose cube cannot work with other receiver directly, it has to be work with bose's woofer (they call module) and they have specific wire to connect. So I give up to switch to bose even they match my deco and go back to traditional. Good luck.

http://www.allbose.com/Question.aspx?id=64108

http://products.bose.com/pdf/customer_service/owners/am6_guide.pdf

Jan 19, 2009 | Bose Acoustimass 10 II System

2 Answers

How to wire


From the TV or Cable Box look for the audio output (red/white) use a RCA cable and hook to your Jensen system. Look for audio input on your Jensen and choose the right input selection. Example: Aux connect the RCA on the Aux input, TV connect the RCA on the TV input on your Jensen and so on....

Sep 01, 2007 | Jensen JHT805 System

1 Answer

Jensen JS1000-A sub stopped working, why?


Is is possible that the receiver's subwoofer configuration turned off? double check your speakers setup in the receiver...Just an idea.

Jun 30, 2007 | Jensen JS1000-A Subwoofer

Not finding what you are looking for?
Speakers & Subwoofers Logo

672 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Speakers & Subwoofers Experts

 Grubhead
Grubhead

Level 3 Expert

4584 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Brad Brown

Level 3 Expert

13530 Answers

Are you a Jensen Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...