Medela lactina broken belt

Dyson vacuum cleaners fans heaters accessories spares official site

did you check the belt?

Belt was broken, so I had to go inside the motor assembly -- torx screws all the way. The problem is finding a replacement belt without buying a whole new power drive.

The belt may have streached so that when pressure is applied to it the belt slips. The belt will not be broken just streached to far.

Your belt number will be listed on the data label with the model number. Check your local Hoover / Dirt devil dealer for the part.

The belt doesn't have to be broken to be non-functioning. If the belt is intact but stretched it won't turn the brush. You can get belts here:

Dyson DC14 Belts

That means that the belt is broken, stretched or worn. You need to change the belt. You can get replacements here:

Replacement Vacuum Belts

Here is a link to the owners manual which has instructions and a link to the belt you need.

Eureka Altima Owner's Guide

Eureka Altima Replacement Belts

The belt may not be broken but after 3 years the belt will have stretched and it will not turn the brush. You should change the belt every year. Changing the belt is an inexpensive fix. I would try that first and if it doesn't do the trick I would take it to a repair shop. You can get the belt you need here:

Dyson DC07 Replacement Belts

sad to say but as far as i know you cannot get any parts for dirt devil vacs only filters and belts and bags sorry