Hi, My name is Amri alburnuni from Aceh Indonesia, I have problem with my Printer canon MP 145 which is E27 = Waste ink absorber full or platen waste ink absorber full, I already clean the pleace where ink absorb but still E27. i also try to press power than press reset but does not work. please help any of you have solution of my prolem, thank you very much. Tgk Amri Alburnuni e-mail: email@example.com
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
printer powered off but connected on power source , you must: 1. Press & hold stop/reset button, and then press & hold [ON/OFF] button. 2. When Green power lit, leave stop/reset button & press twice stop/reset (see orange indicator). 3. Leave On/Off button. Printer in actually service mode. 4. Press stop/reset 4 times (see orange indicator) if not blink restart above process from top. 5. After press stop/reset 4 times successful press On/Off button 3 times. printer will off. 6. Press On/Off button.
Hi this works with some canon priters try ir codes for reset:
1. Press and hold the POWER button 2. Turn off the printer by disconnecting the printer power cable, 3. turn on the printer, still holding the POWER button The indicator (L.E.D.) should be green. 4. Press and release the RESUME button , the indicator (L.E.D.) should be orange. 5. Press and release the RESUME button again, the indicator (L.E.D.) should be green. 6. Release both buttons. 7. Reconnect the printer cable. 8. And it should be reset.
All best: Pineworks