Question about Lexar 64MB FLASH MEMORY DRIVE USB 2.0 - (JDCL064231) Hard Drive

4 Answers

Usb flash pen drive

I have a flash pen drive and it was working until i plug it in the front usb port and the computer said it was not recognize ther was no simbol in the bottom corner or on my comperter and said it had no driver or the driver was not loaded i clik on update the computer said it was fully updated then i plug it into the back it was the same but before i had this promblem i replaced the front usb port cable it had 1 red wire 1 white wire 1 green and 2 black and also i plug my mp3 player in the front and the computer does not recognize and when i tryed my mp3 player and flash pen in others computers the same happens and there is no simbol in the bottom corner and on my computer i have vista and my brother has xp on the mp3 player screen in saids it is ready please help me

Posted by on

  • 2 more comments 
  • Anonymous Jan 30, 2008

    I have a Sony 8GB USB flash drive, computer can identify there is a flash drive inserted in drive F: but once you list the content of the directory, the computer will ask you to insert your USB flash drive. It already contains more than 2GB of data but now it's gone. What shall I do to recover the files

  • Anonymous Apr 20, 2008

    connot read

  • Anonymous Nov 12, 2008

    KINGSTON

  • Anonymous Feb 03, 2009

    scan disk cruzer 4.0 gb

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When Iplug in my pendrive it acts as a disk drive, when I open the pendrive, It says please insert the disk into the drive. I can't format the pendrive. please help.

Posted on Sep 19, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have bought kingston pen drive 8 GB..d problem is that files get corrupted...there r all sorts of different symbols instead of the actual file name...the space occupied by it also changes somehow....i tried formatting it but the problem persists.. i encountered same problem with my earlier SONY 4 GB PEN DRIVE(vaio)... please suggest some remedy..

Posted on Apr 10, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When my usb loaded then i open my computer page there show my drive but when i open it then it shows error please insert a disk into driveG.

Please help me i have check my flash drive of 2GB on others computers i have a window xp 2002 profesional service psck 2 also check on service pack3.

Posted on Apr 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 254 Answers

It is possible the front set of USB connectors were mis-wired or the motherboard end was connected backwards, and thus might've damaged your flash drive & mp3 player. If you are interested in the pinout specs, look here http://pinouts.ru/Slots/USB_pinout.shtml If you've tried the flash drive & mp3 player in a known good computer, & they don't work, then this tells you they have a problem. If damage to the electronics of the devices has been done, because of a miswire, then they must either be replaced or repaired. As far as recovering data from the flash, this would be doubtful if the above is true. Look here for information related to repartitioning the flash drive. http://www.techspot.com/vb/topic17341.html You might need to do something similiar with the mp3 player. I don't have alot of experience with either device, but perhaps another contributor can give more accurate counsel.

Posted on Jul 12, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My transcend pen drive tell me use device not recognized


hi asif,

try to use another USB ports until it wil recognize...otherwise defective or has viruses


regards,

mastergani

Dec 30, 2010 | Transcend 4GB JetFlash 110 USB 2.0 Flash...

1 Answer

My pen drive can not show in my computer but show another computer


If you have more than one USB port, try the flash drive in each one and see if any of them recognize it. You may just have a bad USB port.

Aug 18, 2010 | Transcend 4GB JetFlash 110 USB 2.0 Flash...

1 Answer

HP Pavilion zv6000: USB ports are inop. USB port on rear of computer works fine. USB port on left/front will power my flash drive, but the light stays on constantly. The flash drive is does NOT show up in...


After reading the description, I think you need to try updating BIOS and latest device drivers for USB. Because USB are getting power on that means there would not be any fault to from the motherboard.

So please try updating latest BIOS for your notebook.
If you can provide me the product no for your notebook and the operating system which you are using currently then I can find the one for you.

Otherwise you can also do the same.

Type in the product no. on www.hp.com. Then go to software and driver download page, select the proper OS and search in BIOS ROM pack available for your notebook.

I hope this will help.

Jun 11, 2010 | HP Pavillion ZV6000 Notebook

1 Answer

4 Gb pen drive can't poen


Your drive could be corrupt. The first thing I would do however is make sure you are plugging it into a good USB port. If you are using a desktop with USB ports in the front, and are plugging the drive in there, remove it and plug it in to one of the USB ports on the back of the computer. Many times the front ones will have issues with certain USB devices. If that doesn't work, you very well may have a bad usb drive. I would try it on another computer if switching the usb port doesn't help, to see if the drive is truly not working or just a driver problem on your computer.

Apr 20, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

I have sony micro vault 2 GB pen drive but win xp sp3. but i plug pen drive the message is flash ''usb Device not recognized'' so how can solve this problem. how can work my pendrive properly.


Goto my computer and right click, left click on properties and find device manager.
Scroll down until you find universal serial bus controllers click on the + sign, right click on 'Enhanced Host Controller', right click and choose update driver, use the internet option to download updated driver, this should hopefully resolve your USB problem.
If it does not update and the usb drivers and they seem fine, then the problem could be with the flash drive, try the drive in another computer to check that it is working.

Apr 02, 2010 | Sony 1GB Micro Vault Ultra Mini USB 2.0...

1 Answer

Kingston 2gb datatraveler malfunctioned


there is absolutely no problem in your pc .
your pen drive is faulty.

Feb 14, 2010 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

How to install drivers of pen drive


your pen drive is not recognize by the usb port onyour computer, remove the pen drive from the port and insert it to another usb port on your computer, if you still having problems, restart the computer and try again on a different port.

USB drives do not drivers for it to work.

Jul 03, 2009 | SanDisk 8GB microSDHC Memory Card with...

1 Answer

Usb flash pen drive


Often it is due to electrostatic charges on usb. Unplug all USBs.Unplug PC from power cable for 10/15/ minutes. plug back computer to power outlet and restart. Plug back usb.
If it still does not work , flash memory may be faulty, test it on a different computer.

Mar 17, 2008 | Toshiba 1GB USB 2.0 High-Speed Flash Drive...

1 Answer

USB Drive


Make sure you are matching the compatibility of USB 1.1 and USB 2.0 between the devices (computer and USB devices).

USB 1.1 device will work in USB 1.1 and USB 2.0, but USB 2.0 devices will not work in USB 1.1 plug in the computer.

How many USB ports do you have in the computer? Which ones have you tried other pen drives in? List the USB ratings for each device and port in the computer to further help.

Have the other USB devices been formatted with other computers? The formatting on other systems might not be compatible.

Nov 21, 2007 | Microsoft Windows Vista Ultimate Edition

Not finding what you are looking for?
Lexar 64MB FLASH MEMORY DRIVE USB 2.0 - (JDCL064231) Hard Drive Logo

796 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexar Computers & Internet Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Sunday Ojelabi
Sunday Ojelabi

Level 2 Expert

302 Answers

Lawrence Oravetz

Level 3 Expert

10263 Answers

Are you a Lexar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...