Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Machine stop working

During the start of wash cycle, my Kenmore suddenly stop working. I checked the electrical outlet and it has power. I tried to reduce the load but did not change anything. Is there an internal circuit breaker on my unit?

Posted by on

  • Thomas Malailua
    Thomas Malailua May 11, 2010

    yes, in the motor ,but it is momentary and self resetting.this is a kenmore?dose it fill?dose it make any noise at all? or is it just dead in all cycles?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller board has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool duet washer power went of during a cycle


If the power is not reaching the m/c., switch off plug outlet remove the plug.
( safety measure ).

Now open the machine and check the fuse. If you trace the power cord you will reach the fuse area.

Apr 06, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Kenmore 70 series filled and stopped...


Lid switch problem. Press down on lid and try to start machine. Reply.

Jun 15, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Machine sometimes needs assist to start wash and cycles


Try another appliance in the same outlet the washer uses. If it runs weak too, you can have the outlet replaced. Use an appliance that uses a lot of electricity for the test. If the washer has a belt, check it for wear and tightness. Belts are cheap. Sticking your arm into a washer is dangerous.

Apr 27, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Washing mchine stops during cycle and starts beeping


See if you are overfilling you machine or the load is out of balance. Even try running the machine empty

Jan 19, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washing machine suddenly stopped working during cycle


Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:

* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

Jan 01, 2009 | Kenmore 3.5 cu. ft. Front Load Electric...

1 Answer

Kenmore 80 - in mid spin cycle the machine tripped GFI


check your pump ,,, sounds like you gotten something in it putting a strain on the motor to overload your breaker

Nov 17, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

KENMORE Elite HE 3T


no but there is a control bd it is probably gone

Jul 30, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore washer just stopped


Open and close lid, listen for 'clicking' sound. If no 'clicking' sound, check/replace lid switch. Also try tightening the lid hinge screws on the left side. if these screws come loose, the machine will not operate

Jun 14, 2008 | Kenmore 24642 Top Load Washer

1 Answer

Machine off balace during washing then stopped working


could be either interface control(pushbuttons and knob) or machine control (gray plastic box)

Jun 01, 2008 | Kenmore Oasis HE 27062 Top Load Washer

1 Answer

Kenmore elite front loader washing machine


has the fuse blown, if so replace this to ge the machine up and working to start with, set to drain only if you have the option, if the machine empties then the door may open, if its set to spin and the electric trips then there is a motor fault,, not much information given but now you have somewhere to start from

Sep 23, 2007 | Hotpoint WD52 Front Load Washer / Dryer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...