Question about Omega Air Tools & Compressors

Open Question

Paslode im65 f16 misfires

Misfires

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rowdy45176
  • 2176 Answers

SOURCE: how do i find if i am getting a spark on my

I cant find anything on their site about the IM65, but go to Paslode.com and under products find the brad nailer and you can download an owners manual with troubleshooting information, when you have that if you still need more help get back with me and I will walk you thru it.

Posted on Dec 20, 2009

  • 174 Answers

SOURCE: i have cleaned and oiled both my paslode im65 f16

most new nail guns and stapler don't call for oil.check your gun to make sure that it needs oil . in my experience oiling a gun that doesn't call for it will cause more trouble .if this is the case you will need to get the oil out of it. you can try spraying contact cleaner in the air intake and hooking the air line up and firing the gun.if this wont fix it you may need to pull it apart to clean the oil out.be careful what you use to clean this with because you can cause your O-Rings in your gun to swell up.any nick in a O-Ring can cause failure. i hope this helps you out

Posted on Feb 20, 2010

  • 1383 Answers

SOURCE: my paslode t250-f16 doesn't fire when triggered--

When headvalve orings are leaking, the nailer will not fire. Remove head and also remove the headvalve. Examine the surface/s where orings make contact looking for scratches. Sand surface with 300 grit paper until smooth. Reinstall parts using silicone paste lube. If head is too scratched /worn, also replace with new including orings as needed. Good luck

Posted on Jan 29, 2011

heatman101
  • 43501 Answers

SOURCE: Universal nails appear to be messing up paslode

Hi,
You need to use the correct nails...


Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101


Posted on Mar 06, 2011

heatman101
  • 43501 Answers

SOURCE: Model 3250-f16 Paslode I recv'd this nailer

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



=-=-

Posted on Mar 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My paslode im65 won't fire unless I push the gas


Are you sure you have the cap installed all the way on the fuel cell? They are a bit tough to snap onto the cell. The other thing to look at is the back of the door that covers the cell. There is a roller (called an actuator bushing) that actually pushes on the cell when the safety is depressed. That is how it lets the cell release fuel into the combustion chamber. Also make sure the fuel cell isn't getting too empty or is expired. There is an expiration date on the bottom of the cell. If you have a new, fresh cell that is always the first thing to try since it is easy to pop a new fuel cell into the tool and test it.

Mar 07, 2012 | Tools & Hardware - Others

1 Answer

Won't fire


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



,./,./

Feb 11, 2011 | NRS Paslode T250-f16,s200-s16 Nailer &...

1 Answer

Universal nails appear to be messing up paslode im65 nailguns, 5 guns on one site.


Hi,
You need to use the correct nails...


Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101


Feb 03, 2011 | Craftsman Nailer Kit, Palm Air Driver

1 Answer

Paslode im65 does not fire unless you push push down twice for it to fire. have cleaned it around spark plug ect any ideas much appreciated


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



';'][][\

Dec 12, 2010 | Craftsman Nailer Kit, Palm Air Driver

1 Answer

Model 3250-f16 Paslode I recv'd this nailer without a booklet. I would like to know how to use it. Can you help?


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



=-=-

Nov 03, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

My IM65 light flashes green then red, fan seems to be working and the gun does fire


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



,./,./';';

Aug 30, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

My im65 palode has stopped working,the red and green light if flashing,What could be wrong?


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



]

May 14, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

I have cleaned and oiled both my paslode im65 f16 and they just keep sticking wen fring, also have to push the nose down twice to fire


most new nail guns and stapler don't call for oil.check your gun to make sure that it needs oil . in my experience oiling a gun that doesn't call for it will cause more trouble .if this is the case you will need to get the oil out of it. you can try spraying contact cleaner in the air intake and hooking the air line up and firing the gun.if this wont fix it you may need to pull it apart to clean the oil out.be careful what you use to clean this with because you can cause your O-Rings in your gun to swell up.any nick in a O-Ring can cause failure. i hope this helps you out

Feb 13, 2010 | Craftsman Nailer Kit, Palm Air Driver

1 Answer

Were can i buy a instruction manual for a paslode


go to Paslode.com and you can download the manual for free. Let me know if you have any problems

Dec 11, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

How do i find if i am getting a spark on my paslode im65 bradder please. woodtop


I cant find anything on their site about the IM65, but go to Paslode.com and under products find the brad nailer and you can download an owners manual with troubleshooting information, when you have that if you still need more help get back with me and I will walk you thru it.

Dec 06, 2009 | Tools & Hardware - Others

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Omega Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1383 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you an Omega Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...