Question about HP PSC 1350 All-In-One Thermal Printer

1 Answer

Hp 1350 all-in one psc

Will not print off my computer I have a couple of problems. First, when I turn on my printer it starts very slow and it doesn't sound right. Then when I test to print. The paper wont feed into it...or the printer will not catch the printer and pull it in to print. I love HP printers, but this one was a problem since I have gotten it. Most of the time, I had to help feed the paper in for it to catch to print. But now, it's hard to tell when its ready to feed. So does anyone know what going on with the printer? I should add. I have recently moved. So, could the move had anything to do with its poor behavior? Do not go there with ink, I am appauld at the price of cartridge ink alone especially for this printer. It's outrageous.

Any advice would be very helpful?

Thank you

Printer ModeL: HP PSC 1350v All in one InkJet Printer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 254 Answers

Your paper feed problem may be due to the feed rollers or due to the fact the mecanism that raise the paper doesn't function properly. Normally if you clean the rollers that should work

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My HP psc 1350 all in one printer scanner copier keeps saying paper jam, how do I clear status on my computer when I have fixed all paper jams and printer says clear?


I suggest you uninstall the printer and disconnect it from the mains and from the computer. Restart your computer a couple of times and then reinstall the printer.

I have used HP printers quite a bit and find them reliable if they are left alone but if I try and interrupt their work by cancelling a print once it has begun or even by attempting to continue working on the computer while it is printing it starts acting like a crazy person and won't stop until it has been switched off for about half an hour. All my HP printers have been the same in this respect...

Jun 13, 2016 | HP Psc 1350 All In One Printer Scanner...

1 Answer

HP psc 1350. After recent computer repair, printer won't print.


Here is a link to your drivers. Just select your operating system and download and install.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=306888&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20%C2%BB

Oct 25, 2009 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

Alignment sheet prints---cannot print anything else


u will have to first scan the alignment paper in your scanner this will solve your problem

Nov 14, 2008 | HP PSC 1315 All-In-One InkJet Printer

2 Answers

HP psc 1350 all in one printer


You can download the drivers and software for the PSC 1350 from HP's website here.

Regards,
Bob Headrick, MS MVP Printing/Imaging

Jun 23, 2008 | HP PSC 1350 All-In-One Thermal Printer

2 Answers

How do I make my printer stop printing a test page at power up?


Hello Guys

Check this

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00473766&cc=us&lc=en&dlc=en&product=1103491&dlc=en&lang=en

enjoy

May 17, 2008 | HP PSC 1350 All-In-One Thermal Printer

6 Answers

Hp psc 1350 printer


i cannot re-install my hp 1350 all in one scanner. i have uninstall and re-install the printer driver was unknown. how can that be possible even i dont have the cd that comes with it.

Feb 02, 2008 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

Hp 1350 psc alignment page


OOh dear your printer has a little confusion gnome!!!, i am assuming it is attatched to pc, you have to start by resetting it. Take out the cartridge. Close printer and turn it off. Unplug it, remove all cables. Now, take 3 deep breaths, replug all cables, turn it on and wait for pc to recognise it. It will reset it for you. Now, try printing normally again. Re-post if this does not fix it.

Aug 28, 2007 | HP PSC 1350 All-In-One Thermal Printer

Not finding what you are looking for?
HP PSC 1350 All-In-One Thermal Printer Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...