Question about Office Equipment & Supplies

Open Question

Canon 5250 error 6c10 - Office Equipment & Supplies

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

komguy
  • 2306 Answers

SOURCE: Hi there , my canon MP630 has all of a sudden 6c10 error ?

That error says that either something is jammed in the purge assembly, the unit on the right that cleans the printhead, or the purge assembly is stuck or broken. If you unplug the printer with the carriage in the center you can use a flashlight to inspect the area on the far right where the printhead parks.

Posted on Nov 05, 2009

  • 421 Answers

SOURCE: My Canon MP630 has a 6C10 error

You have a "Valve Cam sensor error". Usually caused by paper debris inside the printer, probably near the purge unit.

Have a ggod look inside and see if you can see any bits of paper.

Posted on Jan 08, 2010

  • 4 Answers

SOURCE: MP560 Canon Printer Error 6C10

The above suggestion worked short term, but in about a couple of hours, I'd get the same old error code again. Finally, I found a solution that worked for my MX860 on fixya.com written by "pineworks". The link is as follows: http://www.fixya.com/support/t4097826-aborber_full_error_message

Don't know if you've found an answer to this problem yet, but I had the same issue for about three months. Finally, I found a solution that worked for my MX860 on fixya.com written by "pineworks". The link is as follows: http://www.fixya.com/support/t4097826-aborber_full_error_message

For months, I've had to power off, disconnect from computer, and power on again to kick-start the printing. It was driving me crazy. So far, "pineworks" solution has been a permanent one. Been about a week and have had no problems yet.

Posted on Apr 14, 2010

  • 37 Answers

SOURCE: Canon PIXMA IP3600 Service error 6C10, and doesnn't print at all

Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Posted on Aug 02, 2010

  • 37 Answers

SOURCE: Canon MP540 Error 6C10

Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Posted on Aug 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is error 6C10 on Canon Pixma MP540


This video concerns the MP550 but according to the comments, it worked for someone with a MP540.
Canon MP550 Ink Absorber Reset 6C10 Error Code

Feb 04, 2017 | Canon Office Equipment & Supplies

1 Answer

What does Canon Pixma MG8220 error 6C10 mean?


Go to the Canon homepage, go to error messages, query that specific error.

Aug 03, 2014 | Canon PIXMA MG8220 - Multifunction ...

1 Answer

Canon MP-5200 printer will not turn on display


6C10 means you need to replace the ink absorber. After this it require to reset the error. Reset 6C10

Oct 15, 2012 | Canon PIXMA iP4600 Color InkJet Photo...

2 Answers

Absober full canon ip4840


My printer IP4840 have an error 6C10 how do l solve this

May 22, 2011 | Computers & Internet

1 Answer

My Canon MP630 has a 6C10 error


You have a "Valve Cam sensor error". Usually caused by paper debris inside the printer, probably near the purge unit.

Have a ggod look inside and see if you can see any bits of paper.

Jan 08, 2010 | Canon Office Equipment & Supplies

3 Answers

Canon PIXMA IP3600 Service error 6C10, and doesnn't print at all


Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Sep 27, 2009 | Canon PIXMA iP3600 Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...