Question about HP Comaq (229967-001) (229967001) Networking Switch

1 Answer

WLAN device driver loading Issue

Hi,

I currently own a Compaq Presario V6000 and have had it for roughly just over a year now. Lately the WLAN device is having issues. Sometime when I start up the Laptop the WLAN driver does not load up. I check the device manager and the "broadcom 802.11a/b/g WLAN" device comes and goes and does not register sometimes. I also check the HP wireless assistant for "Installed Wireless Devices" and the WLAN device is not detected only the bluetooth device is.
Can you please assist me with fixing this problem? I hope I have provided enough information to understand my problem, If any more information is needed I am more then happy to assist.

Thank You
George.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 40 Answers

Greetings,
I beleive you have explained the concern well except for the OS that you use. We have to understand that WLAN is a windows feature. You can try for command prompt by using commands in the netsh wlan context for Windows Vista if you use one and this will help. Else contact.

Regards,
TechSup1

Posted on May 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have hub4 friend giving me hub 5 so I just change it over and that all I do


Should be just a changeover the hub is not very intelligent so there should not be too much issue. Speed of hub ports ? 10/100/1000 Mb/s
hubs basically repeat the network packets to all ports .
what feeds into the hub what speed is it at and what speeds does the hub support is the only issue you may have. Assuming you have ethernet hubs.
MUST use 5 hubs power supply AC to DC adapter with the 5 hub device.
do not just pull power plug out of 4 hub and put it in 5 hub device unless you know they are compatible with same DC voltage and current rating it is much simpler not to mix them up.

Sep 13, 2016 | Networking Hubs & Switches

2 Answers

I am trying to network 2 comoputers through the netgear 5-port fast ethernet switch FS605. the internet is coming through my modem ARRIS CM550. My laptop is running windows 7 and recognizes the network...


Hello Hacker,

Open the lan card properties and open the tab configure. Go to the advance option and look for Link speed and Duplex option. From left pane choose the value 10Mbps/Half Duplex. The Lab connection will be enabled. Also enter the IP address and DNS settings if required.

Also visit the link provided below :

http://www.buildeasypc.com/blogs/how-to-install-and-configure-a-network-card-in-windows-7/

Jun 11, 2011 | NetGear FS605 - 5-Port 10/100 Network...

2 Answers

Driver downloading link for des-1008d


How Can I download Free Diver D-Link DES-1008D 10/100 Fast Ethernet Switch for XP Profession?

Aug 13, 2010 | D-Link DES-1008D 8-Port Ethernet Switch...

1 Answer

I have not received hp redemption gift


respected sir i purchases 2 compaq presario system under NOW OR NEVER offer in2009file no. 85641 and 85594. but have not recived any gift. So kindely send my gift

Mar 22, 2010 | HP 48 x 10/100Base-TX LAN - 2 x Expansion...

1 Answer

Can I install Windows XP-Pro on presario 1800 XL


Yes, but I want to say no, just cause by asking that you seem dumb enough to believe it.

Yes you can, step one is donating it to some organization, step two is getting a mac (they're made for you people)

Oct 07, 2009 | Compaq (175310-001) for Presario 1600XL /...

1 Answer

I have now idea how to use it


this is compaq ethernet hub and very easy to use.

just powerup this hub nad give ip to each PC or laptop and connect through CAT5 or CAT6 cable .To ensure connectivity ping PC and laptop .

its working fine.

Apr 24, 2009 | Compaq Netelligent 2016 (267046-001)...

1 Answer

Drivers


Go to HP's website: you must get the exact model number beyond just F700.  look at the sticker.

Feb 28, 2009 | Networking Hubs & Switches

2 Answers

Cpqusbfw usb hub


i have one of those hubs the ac adapter is output +5V, and current 0.2 - 2.5A, inside of connector is pos(+), outside is neg(-), input: 100 - 120 Vac and 0.45A Max

Aug 30, 2008 | Micro Innovations Compaq CPQ24USB

Not finding what you are looking for?
Networking Hubs & Switches Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Networking Hubs & Switches Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Jimmy Hernandez
Jimmy Hernandez

Level 2 Expert

49 Answers

Are you a HP Networking Hub and Switch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...