Question about Toys
Remote control helicopter
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem, the helicopter would spin out of control and the trim did not help. I took a closer look and noticed that only the top rotor was turning. I took the bottom off of the round gear box to find a tiny white gear had slipped off the second motor. With a pair of needle nose tweezers I was able to reattach the gear and I was flying in no time.
Posted on Feb 02, 2012
I have a 27Mhz helicoper (looks identical to the one on the picture). I tried to fly it for the first time, but I am having problems controlling it. The left radio control lever sends the helicopter upwards, but the right hand control doesn't seem to do anything and that should make it go backwards and forwards. Can anyone help me as well please?
Posted on Feb 22, 2010
There should be a sticker near the helicopters "on off" switch that has an "A" "B" or "C" on it. Make sure the switch on the controller is set to correspond with that letter. If that isnt it, keep it for parts and buy another. These are VERY delicate toys and most break quite easily.
Posted on Feb 18, 2011
SOURCE: The helicopter syma s032 not
0) Obviously, helicopter will operate best when fully charged... if
charging light gets brighter when unplugged from helicopter, then it's
not at full charge. Charge fully, then allow battery to cool for 10
minutes. Good batteries in remote also.
1) Power on helicopter.
2) Place on level surface and let gyroscopes sync. There is a red light inside the body (NOT the red/blue flasher in the nose) that will blink when you turn helicopter on, and will keep blinking until craft is level and stable for a few seconds, then will stop blinking.
3) Make sure left joystick is all the way down.
4) Power on remote.
5) Throttle up (left joystick) until blades move and then all the way back down.
This should get you flying. Let me know.
hope this helps,
Posted on Sep 13, 2011
Tips for a great answer:
Jun 11, 2014 | Team International Hawk Talon V3 RC Indoor...
Jan 04, 2011 | Team International Hawk Talon V3 RC Indoor...
Dec 27, 2010 | SYMA Toys industrial New Syma S107 Radio...
Dec 25, 2010 | Team International Hawk Talon V3 RC Indoor...
Dec 25, 2010 | Air Hogs Havoc Heli Helicopters
Jan 04, 2010 | Shuttle 9094 Emax Remote Control...
Aug 15, 2009 | Sky I Blade Mini IR Helicopter W/ Remote...
Aug 06, 2009 | Shuttle 9094 Emax Remote Control...
Dec 30, 2008 | Sky I Blade Mini IR Helicopter W/ Remote...
66 people viewed this question
Usually answered in minutes!